As an Amazon Associate we earn from qualifying purchases. Affiliate disclosure

AeternaSol D1440B 400W (2 x 200W) N-Type Solar Panel 2-Pack Review: Specs, Pros and Cons

Latest update:

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

The AeternaSol D1440B is two 200W framed black panels sold as a 400W pair for 12V RV, marine, farm and home systems. Each uses N-type 18BB cells that AeternaSol rates at 25.6%, in a 56.7 x 26.4 x 1.18 in aluminum frame with pre-drilled holes. The 21.6 lb figure matches AeternaSol's single S1440B listing of the same size, so read it as the weight of one panel and about 43 lb for the pair. The details AeternaSol spends time on are the hardware: an IP68 potted junction box, 11 AWG oxygen-free copper leads rated to 25A with a UV jacket, and MC4 connectors with PPO shells. Support is 10 years from the seller, with a 30-year guarantee of 84.5% output. What is missing is any Voc, Vmp or current figure. This review relies on AeternaSol's listing only; we have not tested the panels.

What stands out

  • Two 200W N-type 18BB panels, 25.6% claimed
  • 56.7 x 26.4 in each, about 21.6 lb per panel
  • IP68 potted junction box, 11 AWG copper leads
  • 10-year support, 30-year 84.5% output guarantee

Who it fits

Good fit for

RV, cabin and shed owners building a 12V system who want two matching 200W framed panels with heavy-gauge leads, and who will size the controller once they have the Voc.

Who should skip it

Portable station users who want a folder to carry, and anyone who needs Voc and Isc printed on the listing before ordering.

Verdict: A solid pair of 200W framed panels with good cabling; the electrical data has to come from AeternaSol.

AeternaSol D1440B pair figures in plain terms

2 x 200W, N-type 18BB, 25.6%

400W of rated panel; each module stands alone.

56.7 x 26.4 x 1.18 in each

Longer than the 52.8 in AeternaSol 200W frames; measure the roof.

21.6 lb listed

Same as the single S1440B listing, so per panel; about 43 lb for both.

11 AWG oxygen-free copper, 25A

Thicker than the usual 12 AWG leads; less voltage drop on long runs.

IP68 potted junction box

AeternaSol pots the D1440B box so moisture cannot reach the terminals.

No Voc, Vmp or Isc

Ask AeternaSol before wiring the pair in series.

Frames, leads and connectors on the D1440B

Each panel has an aluminum alloy frame with extra sealant at the edges and pre-drilled holes for Z-brackets or tilt mounts. The junction box is potted to IP68 and designed to shed heat. Leads are 11 AWG oxygen-free copper in a UV-resistant jacket, ending in MC4 connectors that use copper pins in a PPO shell. The listing does not give lead length.

Wiring two AeternaSol D1440B panels

For a 12V bank, the pair usually goes in parallel to a 12V MPPT or PWM controller rated for about 30A; in series it suits a 24V MPPT controller, but check the string Voc first, which AeternaSol does not list. On an RV, the 56.7 in length can clash with vents and an air conditioner shroud, so map the roof before ordering. AeternaSol's 200W rating is at standard test conditions; real output drops with heat and angle.

Before ordering the AeternaSol D1440B pair

Run through these checks.

Check before you buy

  • Your roof fits two 56.7 x 26.4 in AeternaSol D1440B panels
  • You have the D1440B Voc from AeternaSol for your controller
  • Your mount takes about 21.6 lb per AeternaSol panel
  • You have MC4 extensions to reach the D1440B pair's controller

The product at a glance

AeternaSol 200W N-Type 25.6% Solar Panel

Best for: Fixed 12V roofs with long runs

Rated Power
200W
Conversion Efficiency
25.6%
Cell Type
N-Type monocrystalline
System Voltage
12V
Busbar Count
18BB
IP Rating
IP68

View on Amazon: AeternaSol 200W N-Type 25.6% Solar Panel Affiliate link

Two 200W N-type 18BB black framed panels (56.7 x 26.4 in, about 21.6 lb each) with IP68 boxes, 11 AWG copper leads and 10-year support; no Voc listed.

Pros

  • Heavy 11 AWG copper leads
  • IP68 potted junction box
  • 30-year output guarantee

Cons

  • No Voc, Vmp or Isc
  • Long 56.7 in frame

Good fit if

  • You want two matching AeternaSol 200W frames
  • Your 12V system has room for 56.7 in panels

Skip if

  • You need a folder for a station
  • You want the D1440B voltage sheet first

Verdict: Well-wired 200W framed pair for fixed 12V systems.

Specifications side by side

Spec AeternaSol 200W N-Type 25.6% Solar Panel
Rated Power 200W
Conversion Efficiency 25.6%
Cell Type N-Type monocrystalline
System Voltage 12V
Busbar Count 18BB
IP Rating IP68
Weight 21.6 pounds
Wattage 200W
Application Home, Off-Grid, Marine
Features Solar Charging
Voltage 12V
Dimensions 56.7 × 26.4 × 1.18 inches
Color Black
Model D1440B

Frequently asked questions

Is the 21.6 lb weight for both AeternaSol D1440B panels?

It matches AeternaSol's single S1440B listing of the same size, so it reads as per panel; the pair is about 43 lb.

What cable comes on the AeternaSol D1440B?

11 AWG oxygen-free copper leads rated to 25A, with MC4 connectors in PPO shells.

Does AeternaSol list the D1440B's Voc?

No. The listing gives wattage and efficiency only.

What guarantee comes with the AeternaSol D1440B pair?

10 years of seller support and a 30-year guarantee of 84.5% output.

Are the AeternaSol D1440B panels bifacial?

No, the D1440B is the black single-sided version; AeternaSol sells bifacial 200W models separately.

See also