As an Amazon Associate we earn from qualifying purchases. Affiliate disclosure

AeternaSol S980B 100W N-Type Rigid Solar Panel Review

Latest update:

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

The AeternaSol S980B is a single-sided 100W rigid panel with N-type A+ cells and 18 busbars, rated at 25% cell efficiency. It is a roof-and-rack panel: an aluminum alloy frame with extra sealant, pre-drilled mounting holes, and a 39.8 x 18.1 x 1.18 in footprint at 10.6 lb. AeternaSol puts the most words into the wiring: the junction box is potted to IP68, the leads are 11 AWG oxygen-free copper rated for 25A with a UV-resistant jacket, and the MC4 connectors use galvanized copper pins in a PPO shell. Degradation is listed at 1% or less in year one and 0.4% or less per year after, with a 25-year guarantee of 84.5% output and 10 years of seller support. The listing gives no Voc, Vmp or current. We read AeternaSol's listing; we have not installed this panel.

What stands out

  • 100W, N-type 18BB, 25% cell efficiency
  • IP68 potted junction box
  • 11 AWG oxygen-free copper leads, 25A
  • Pre-drilled aluminum frame, 10.6 lb
  • 25-year 84.5% output guarantee

Who it fits

Good fit for

RV, van, boat and cabin owners building or expanding a 12V roof array who want a standard-size 100W module with heavy wiring.

Who should skip it

Campers who move their panel around by hand, anyone who needs Voc and current figures to size a controller, and buyers who want bifacial gain.

Verdict: A solidly specced 100W roof panel at a low price; ask AeternaSol for the electrical figures before wiring a series string.

S980B specs, explained

100W, 25% N-type cells

A standard 100W module size for 12V roof arrays.

39.8 x 18.1 x 1.18 in, 10.6 lb

Fits most RV and van roof racks; too bulky to carry to a campsite often.

IP68 potted junction box

Sealed against rain, steam and dust, including coastal humidity.

11 AWG copper, 25A

Thicker than typical 12 AWG leads, so less loss on longer runs.

<=1% year one, <=0.4%/year after

Backs AeternaSol's 84.5% output guarantee at 25 years.

S980B frame, wiring and gaps

The S980B has a black back sheet and captures light from the front only, unlike AeternaSol's S980T, which is the bifacial version of this size. The frame is aluminum alloy with sealant along the edges and pre-drilled holes for common Z-brackets or rail mounts. What the listing leaves out are the electrical ratings: no open-circuit voltage, maximum-power voltage or short-circuit current, all needed to check a charge controller's limits when panels go in series.

Wiring the S980B into a 12V system

For a single panel, run the MC4 leads into a 12V charge controller and from there to the battery. To expand, add matching 100W modules in parallel on a 12V controller, or in series for an MPPT controller once you have the Voc from AeternaSol. Choose the S980B for a fixed roof or rack install; choose the bifacial S980T if the panel will sit over a light-colored surface where the rear face can pick up reflected light, or a folding panel if you set up at each campsite.

S980B pre-purchase checks

Mostly electrical and mounting points.

Check before you buy

  • You have the S980B Voc from AeternaSol before a series string
  • Your rack takes a 39.8 x 18.1 in S980B module
  • Your controller suits a 12V S980B array
  • You have Z-brackets or rails for the S980B

The product at a glance

AeternaSol 100W N-Type Solar Panel

Best for: RV and van roof arrays

Rated Power
100W
Conversion Efficiency
25%
Cell Type
N-Type Monocrystalline
System Voltage
12V
Busbar Count
18BB
IP Rating
IP68

View on Amazon: AeternaSol 100W N-Type Solar Panel Affiliate link

Single-sided 100W N-type 18BB rigid panel, IP68 potted junction box, 11 AWG copper leads, MC4, pre-drilled frame, 39.8 x 18.1 in, 10.6 lb, 25-year 84.5% guarantee.

Pros

  • IP68 potted junction box
  • Heavy 11 AWG leads
  • 25-year output guarantee

Cons

  • No Voc or current listed
  • Rigid, not for carrying around
  • No bifacial gain

Good fit if

  • You build a 12V roof array
  • You want heavy wiring on a 100W module

Skip if

  • You need S980B electrical ratings now
  • You set up a panel at each campsite

Verdict: Roof-ready 100W module with heavy wiring, missing electrical ratings.

Specifications side by side

Spec AeternaSol 100W N-Type Solar Panel
Rated Power 100W
Conversion Efficiency 25%
Cell Type N-Type Monocrystalline
System Voltage 12V
Busbar Count 18BB
IP Rating IP68
Weight 10.6 pounds
Wattage 100W
Application RV, Off-Grid, Marine
Voltage 12V
Water Resistance Waterproof
Dimensions 39.8 × 18.1 × 1.18 inches
Size 100W Single Panel
Color Black
Model S980B

Frequently asked questions

Is the AeternaSol S980B bifacial?

No. The S980B is single-sided; AeternaSol's S980T is the bifacial model in this size.

How big is the S980B?

39.8 x 18.1 x 1.18 in, 10.6 lb.

What wire gauge does the S980B use?

11 AWG oxygen-free copper rated for 25A, with a UV-resistant jacket.

What is the S980B degradation rating?

1% or less in the first year and 0.4% or less per year after; AeternaSol guarantees 84.5% output at 25 years.

Does the S980B listing give Voc?

No. It lists no Voc, Vmp or current; ask the seller before series wiring.

See also