Anker SOLIX BP1000 1056Wh Expansion Review: Specs, Pros and Cons
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This anker solix bp1000 expansion review focuses on the extra power module designed specifically for the Anker SOLIX C1000. It adds 1056Wh of capacity, effectively doubling your total energy storage when paired with the host unit. The battery uses LiFePO4 chemistry, which supports 3,000 cycles and a 10-year lifespan. It weighs 20.1 pounds and measures 12.7 by 7.68 by 7.83 inches. This expansion unit is not a standalone power station but a companion piece that extends runtime for compatible devices.
What stands out
- 1056Wh capacity adds to the C1000 host for a total of 2,112Wh.
- LiFePO4 battery chemistry rated for 3,000 cycles and 10 years of daily use.
- Charges fully in under 2 hours using UltraFast mode via the app.
- Features a 3-point safe charging clasp for secure connection to the host.
- Compact design is 25% smaller than previous expansion models.
Who it fits
Good fit for
You should choose this if you already own an Anker SOLIX C1000 and need more runtime for camping or emergency backup. The 1056Wh addition allows you to power devices longer without running out of juice. It is ideal for users who want a simple plug-and-play expansion without managing separate charging stations. The fast 2-hour recharge time means you can quickly top up before your next outing.
Who should skip it
Skip this product if you do not own an Anker SOLIX C1000, as it is not compatible with other models. It is also not suitable for the C1000 Gen 2. If you need a standalone power station that works independently, this expansion battery will not function on its own. Additionally, if you require compatibility with other brands or different Anker SOLIX series units, this specific expansion module is not the right choice for your setup.
Verdict: This expansion battery is a practical way to double your storage if you already have a C1000. It offers reliable capacity and fast recharging for compatible setups.
Key specs for the BP1000
Capacity: 1056Wh
This value indicates the total energy stored inside the battery pack. When you connect this unit to your compatible host station, it adds this amount of watt-hours to your total available power. You can use this extra storage to run devices for longer periods during outages or camping trips. It effectively doubles your system's runtime compared to using the host unit alone.
Compatible Devices: Anker SOLIX C1000
This specification defines exactly which main power station this expansion module works with. You must have the Anker SOLIX C1000 model to use this battery. It does not fit other brands or different Anker models like the Gen 2 version. Check your host unit model number carefully before purchasing to ensure physical and electrical compatibility.
Battery Chemistry: LiFePO4
LiFePO4 stands for Lithium Iron Phosphate. This type of battery is known for high safety and a long service life. It typically supports thousands of charge cycles before its capacity drops significantly. You benefit from more reliable performance over time and reduced risk of thermal issues compared to older lithium-ion chemistries.
Weight: 20.1 pounds
This is the total mass of the expansion battery unit. At over twenty pounds, it is a substantial object to move. You should plan for a two-person lift or use a cart if you need to transport it frequently. Consider this weight when choosing a vehicle for transport or a storage location that can support the load.
Design and Build Specs
The unit measures 12.7 inches in width, 7.68 inches in length, and 7.83 inches in height. It weighs 20.1 pounds. The listing notes the design is 25% smaller than previous models, aiming for a compact form that fits easily into vehicles or storage spaces. The exterior finish is black, providing a neutral look that blends with most portable power setups. You can carry this expansion battery alongside the main C1000 unit without excessive bulk.
According to the listing, the battery features a 3-point safe charging clasp. This mechanical connection ensures the expansion unit stays securely attached to the host station during transport or use. This layout prioritizes stability over complex interfaces, as there are no visible displays or buttons on the expansion module itself. You rely on the host unit for control. The design includes a dedicated battery-to-host cable, simplifying the physical connection process. This straightforward hardware approach reduces potential points of failure. The compact dimensions and secure clasp make it suitable for outdoor adventures where space is limited and movement is frequent. The black color helps hide minor scuffs during travel.
Setup and daily use guide
This expansion battery is designed exclusively for the Anker SOLIX C1000 host station. It does not work with the C1000 Gen 2 or other power stations. You must connect the included battery-to-host cable to link the units. The listing mentions a 3-point safe charging clasp, which secures the connection during operation. This physical lock helps ensure the link remains stable while you are moving the equipment or using it outdoors.
Daily use begins with pairing the two units. Once connected, the system combines the host capacity with this 1056Wh expansion module. You gain a total of 2,112Wh of storage. This doubled capacity allows you to run more devices or keep existing loads running for a longer period. The LiFePO4 chemistry supports 3,000 battery cycles. This specification suggests the battery can be used daily for approximately 10 years before significant degradation occurs.
Recharging is handled through the host station. You can use the AC input to power both units simultaneously. The listing states that UltraFast mode in the Anker app enables a full charge in under 2 hours. This rapid recharge time reduces downtime between uses. The unit weighs 20.1 pounds and measures 12.7 by 7.68 by 7.83 inches. These dimensions and weight make it manageable for carrying in a vehicle or storing in a garage. You simply plug it in, wait for the charge, and connect it to your host when needed.
Check Compatibility And Needs
Before you buy this expansion unit, verify your host device. It works only with the original Anker SOLIX C1000. It is incompatible with the C1000 Gen 2. You must use the included battery-to-host cable to link the units. This module adds 1056Wh of capacity. It doubles your total energy storage when paired correctly. The LiFePO4 chemistry supports 3,000 cycles. This offers a ten-year lifespan with daily use. You do not need separate chargers. You can recharge the combined system in under two hours using UltraFast mode. Keep the unit dry and clean. Store it in a cool place when not in use. This expansion fits alongside other portable power stations as an add-on. It is not a standalone generator. It requires a compatible host. Check your current setup before purchasing. This ensures you get the extra power you need without compatibility issues.
Check before you buy
- Confirm you own the original Anker SOLIX C1000 host station.
- Ensure you do not have the C1000 Gen 2 model.
- Verify you have space for the 20.1 pound expansion unit.
- Check that you need doubled capacity for longer off-grid use.
The product at a glance
Anker SOLIX BP1000 1056Wh Expansion Battery
Best for: doubling runtime for original C1000 users
- Compatible Devices
- Anker SOLIX C1000
- Capacity
- 1056Wh
- Battery Chemistry
- LiFePO4
- Dimensions
- 7.68 × 12.7 × 7.83 inches
- Weight
- 20.1 pounds
View on Amazon: Anker SOLIX BP1000 1056Wh Expansion Battery Affiliate link
The Anker SOLIX BP1000 is a 1056Wh expansion battery designed exclusively for the Anker SOLIX C1000. It uses LiFePO4 chemistry to support 3,000 cycles and a 10-year lifespan. Weighing 20.1 pounds, it doubles your total capacity to 2,112Wh. You can recharge the combined system in under 2 hours using UltraFast mode. This unit is a practical add-on for users who need more runtime from their existing C1000 setup.
Pros
- 1056Wh capacity doubles total system storage
- LiFePO4 battery chemistry supports 3,000 cycles
- 10-year lifespan with proprietary InfiniPower technology
- Recharges fully in under 2 hours with UltraFast mode
Cons
- Not compatible with Anker SOLIX C1000 Gen 2
- Heavy at 20.1 pounds
- Requires specific host unit for operation
Good fit if
- You own the original Anker SOLIX C1000
- You need double the runtime for outdoor adventures
- You want a long-lasting LiFePO4 expansion battery
Skip if
- You own the Anker SOLIX C1000 Gen 2
- You need a standalone power station
- You require compatibility with other brands
Verdict: The Anker SOLIX BP1000 Expansion Battery is a solid capacity booster for owners of the original Anker SOLIX C1000 who need extended power for camping or home backup.
Specifications side by side
| Spec | Anker SOLIX BP1000 1056Wh Expansion Battery |
|---|---|
| Compatible Devices | Anker SOLIX C1000 |
| Capacity | 1056Wh |
| Battery Chemistry | LiFePO4 |
| Dimensions | 7.68 × 12.7 × 7.83 inches |
| Weight | 20.1 pounds |
| Color | Black |
| Model | A17611Z1-85 |
Frequently asked questions
Does the Anker SOLIX BP1000 work with the C1000 Gen 2?
No, it does not. This expansion battery is designed exclusively for the original Anker SOLIX C1000 host station. It is incompatible with the C1000 Gen 2 or any other power stations. You must verify your specific host model before purchasing to ensure connectivity.
What battery chemistry does the BP1000 use?
It uses LiFePO4 chemistry. This type of lithium iron phosphate battery is known for safety and longevity. It supports up to 3,000 charge cycles while retaining 80% of its original capacity, making it suitable for frequent use in camping or home backup scenarios.
How much does the expansion battery weigh?
The unit weighs 20.1 pounds. This weight helps stabilize the connection when attached to the host station. Despite this mass, the design aims to be compact, measuring 12.7 inches in width, 7.68 inches in length, and 7.83 inches in height.
What cable is needed to connect the BP1000?
You must use the included battery-to-host cable. This specific cable links the expansion battery to the original Anker SOLIX C1000. Without this connection, the units cannot communicate or share power. Ensure you keep this cable accessible for setup.
What is the model number for this expansion unit?
The model number is A17611Z1-85. You can find this identifier on the product listing or the device itself. Use this number to verify compatibility with your host station and to locate replacement parts or documentation if needed.
Can I use this battery with other brands?
No, it is not universal. The BP1000 is an expansion module built specifically for the Anker SOLIX C1000. It will not function with other brands or even other Anker models like the C1000 Gen 2. It serves only to double the runtime for the compatible original unit.