Anker SOLIX BP2000 (760) 2,048Wh Expansion Battery Review
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The Anker SOLIX BP2000, also sold as the PowerHouse 760 Expansion Battery (model A1780), is a 2,048Wh LiFePO4 add-on pack, not a standalone power station. It connects to a host station with the included battery-to-host cable; Anker's bullets name the PowerHouse 767 (the F2000), doubling it to 4,096Wh, while the listing title also mentions the F2600. It weighs 45.6 lb at 17.4 x 9.37 x 10.6 in and carries a 5-year full-device warranty. It is the first-generation pack: the BP2000 Gen 2 (A1783, 2,046Wh) is built for the C2000 series instead. This summary draws on Anker's listing; we have not connected one to a station.
What stands out
- 2,048Wh LiFePO4 add-on pack
- F2000 / PowerHouse 767 to 4,096Wh
- Battery-to-host cable included
- 45.6 lb, 17.4 x 9.37 x 10.6 in
- 5-year full-device warranty
Who it fits
Good fit for
Owners of an Anker F2000 (PowerHouse 767) who want twice the stored energy for outages or long off-grid stays.
Who should skip it
Anyone without an F2000-family host (it has no outlets of its own), and C2000 Gen 2 owners, who need the Gen 2 BP2000 instead.
Verdict: A straightforward way to double an F2000; useless without the right host station.
BP2000 (A1780) specs, explained
2,048Wh LiFePO4
Same capacity as the F2000 itself, so runtime roughly doubles.
Host: PowerHouse 767 / F2000
Anker's bullets name only this station; the title adds the F2600.
45.6 lb
A two-hand lift; plan where it sits next to the host.
3-point protective clasp
Anker says it secures the connection and stops leakage current while charging.
5-year full-device warranty
Anker also claims a 10-year design life under daily use.
BP2000 build and connection
The BP2000 is a sealed box with a ventilation grille and a drop-proof unibody shell. It has no AC, USB or car outputs: power flows through the battery-to-host cable into the station, which handles all charging and output. Anker mentions a temperature monitor that samples up to 100 times per second and electronics rated for 50,000 hours. The listing does not say how long the pack takes to charge through the host or whether more than one BP2000 can be chained.
How the BP2000 fits into a backup setup
Park the BP2000 beside the F2000, clip the cable in, and the station shows the combined 4,096Wh; recharge happens through the station's own wall or solar input. Choose this first-generation BP2000 if you already own an F2000 (PowerHouse 767); choose the BP2000 Gen 2 (A1783) if your station is a C2000 Gen 2, since Anker designs each pack for its own host family.
BP2000 (760) checks before you buy
Confirm your station model first.
Check before you buy
- Your station is an Anker F2000 / PowerHouse 767 for the BP2000
- You can lift and place a 45.6 lb BP2000
- You accept that the BP2000 charges only through the host
- You are not buying for a C2000 Gen 2 (needs the Gen 2 pack)
The product at a glance
Anker SOLIX 2048Wh Expansion Battery
Best for: F2000 owners
- Battery Capacity
- 2,048Wh
- Battery Chemistry
- LiFePO4
- Dimensions
- 17.4 × 9.37 × 10.6 inches
- Weight
- 45.6 pounds
View on Amazon: Anker SOLIX 2048Wh Expansion Battery Affiliate link
2,048Wh LiFePO4 add-on for the Anker F2000 / PowerHouse 767 (4,096Wh total), host cable included, 45.6 lb, 5-year warranty.
Pros
- Doubles F2000 capacity
- LiFePO4 with 5-year warranty
- Host cable in the box
Cons
- No outputs of its own
- Heavy at 45.6 lb
- Host list is thin (F2000, F2600 in title only)
Good fit if
- You own an F2000 / PowerHouse 767
- You want longer outage runtime
Skip if
- Your station is a C2000 Gen 2
- You need a standalone power source
Verdict: F2000 owners' route to 4,096Wh.
Specifications side by side
| Spec | Anker SOLIX 2048Wh Expansion Battery |
|---|---|
| Battery Capacity | 2,048Wh |
| Capacity | 2048Wh |
| Battery Chemistry | LiFePO4 |
| Dimensions | 17.4 × 9.37 × 10.6 inches |
| Weight | 45.6 pounds |
| Color | Black |
| Model | A1780 |
Frequently asked questions
Which stations work with the Anker BP2000 (760)?
Anker's bullets name the PowerHouse 767 (F2000); the listing title also mentions the F2600.
How much capacity does the BP2000 (760) add?
2,048Wh, taking an F2000 to 4,096Wh in total.
Can the BP2000 (760) power devices on its own?
No. It has no outlets and works only through a host station.
How heavy is the Anker BP2000 (760)?
45.6 lb, at 17.4 x 9.37 x 10.6 in.
Is the BP2000 Gen 2 the same as the BP2000 (760)?
No. The Gen 2 (A1783, 2,046Wh) is built for the C2000 series.
See also
- anker powercore slim 10000 a1229 power bank review
- sharge shargeek 140 retro 67 gan charger bundle review
- jytigv rh67 10000mah transparent power bank white review
- anker power bank review
- anker laptop power bank review
- Anker Nano 10,000mAh 45W Power Bank Review (2026): A Spec-Based Look
- Anker Prime 20,100mAh 220W Power Bank Review (2026): A Spec-Based Look
- Anker 737 PowerCore 24K 140W 24,000mAh Power Bank Review
- anker solix 3 840wh expansion battery review
- seagate expansion desktop review
