Anker SOLIX BP2000 Gen 2 Expansion Battery Review: 2,046Wh for the C2000 Gen 2
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The Anker SOLIX BP2000 Gen 2 is a 2,046Wh LiFePO4 expansion battery built for the C2000 Gen 2 station, and its one job is to double that station's capacity to 4,096Wh. Anker rates the cells for 4,000 cycles to 80% capacity, roughly daily use for 10 years, and covers the pack with a 5-year warranty. At 41.7 lb it is about the weight of a mid-size station, but it has no outlets: power always flows through the C2000 Gen 2. Note the name clash: the older BP2000 for the Powerhouse 760 is a different pack, so match the Gen 2 label to your station. This review is based on Anker's listing and specs; we have not tested the pack.
What stands out
- 2,046Wh LiFePO4 expansion pack
- Doubles C2000 Gen 2 to 4,096Wh
- 4,000 cycles to 80% capacity
- 5-year warranty
- 41.7 lb, 18.1 x 9.84 x 10.1 in
Who it fits
Good fit for
C2000 Gen 2 owners who run out of capacity on long outages, overnight camping with a fridge, or off-grid weekends, and want more hours without a second station.
Who should skip it
Owners of other Anker stations: Anker says this pack is designed exclusively for the C2000 Gen 2. Skip it too if your problem is output watts rather than runtime.
Verdict: A clean way to turn a C2000 Gen 2 into a 4kWh system, as long as you own the Gen 2 station.
BP2000 Gen 2 specs explained
2,046Wh LiFePO4
Roughly the same capacity as the C2000 Gen 2 itself, so runtime about doubles.
4,096Wh with C2000 Gen 2
Anker's total for one station plus one BP2000 Gen 2.
4,000 cycles to 80%
About ten years of daily charging before capacity drops to 80%.
41.7 lb
Liftable by one adult with care; heavy for a long carry.
18.1 x 9.84 x 10.1 in
A long, low block that can sit under or beside the station.
BP2000 Gen 2 build and contents
The pack is a gray, outlet-free LFP block measuring 18.1 x 9.84 x 10.1 inches. Anker includes the battery-to-host cable and a user manual. The listing's model field reads A1783, the C2000 Gen 2 station code, and the title gives 2,046Wh while the doubling claim implies 2,048Wh; neither changes how the pack is used, but rely on the BP2000 Gen 2 name when ordering.
Living with a C2000 Gen 2 plus BP2000 Gen 2
The pack connects to the station by cable, and the C2000 Gen 2 then draws from and recharges both batteries through its own inputs. That means the outlets, output watts and charging inputs stay those of the station; you just get about twice the hours. A full refill of two packs takes longer on the same solar array, so size panels accordingly.
Check before buying the BP2000 Gen 2
Confirm your station is the C2000 Gen 2, not the original C2000 or a Powerhouse 760. Work out whether 4,096Wh covers your outage or trip, and leave floor space beside the station for the cable run.
Check before you buy
- Your station is an Anker SOLIX C2000 Gen 2
- You need more hours, not more watts
- There is room for an 18.1-inch BP2000 Gen 2 pack beside the station
- Your solar array can refill about 4kWh in a usable time
The product at a glance
Anker SOLIX BP2000 2,046Wh Expansion Battery
Best for: Expanding an Anker C2000 Gen 2
- Capacity
- 2046Wh
- Battery Chemistry
- LiFePO4
- Dimensions
- 18.1 × 9.84 × 10.1 inches
- Weight
- 41.7 pounds
View on Amazon: Anker SOLIX BP2000 2,046Wh Expansion Battery Affiliate link
Anker's 2,046Wh LiFePO4 BP2000 Gen 2 doubles a C2000 Gen 2 to 4,096Wh; 4,000 cycles to 80% and a 5-year warranty.
Pros
- Doubles C2000 Gen 2 capacity
- 4,000-cycle LFP cells
- 5-year warranty
- Cable included
Cons
- Only for C2000 Gen 2
- 41.7 lb
- No outlets of its own
Good fit if
- You own a C2000 Gen 2 and need longer runtime
Skip if
- You have the older C2000 or a Powerhouse 760
Verdict: The matching capacity upgrade for a C2000 Gen 2.
Specifications side by side
| Spec | Anker SOLIX BP2000 2,046Wh Expansion Battery |
|---|---|
| Capacity | 2046Wh |
| Battery Chemistry | LiFePO4 |
| Dimensions | 18.1 × 9.84 × 10.1 inches |
| Weight | 41.7 pounds |
| Color | Gray |
| Model | A1783 |
Frequently asked questions
Which station works with the BP2000 Gen 2?
Anker says it is designed exclusively for the SOLIX C2000 Gen 2.
How much capacity does BP2000 Gen 2 add?
2,046Wh, bringing a C2000 Gen 2 to 4,096Wh in total.
How many cycles is the BP2000 Gen 2 rated for?
4,000 cycles to 80% capacity, about 10 years of daily use.
Is the BP2000 Gen 2 the same as the BP2000 for the Powerhouse 760?
No. The older BP2000 (model A1780) is a separate pack for the 760; the Gen 2 targets the C2000 Gen 2.
What is the BP2000 Gen 2 warranty?
A 5-year full-device warranty.
Featured in
See also
- powkey s99 96wh laptop power bank review
- powkey hp200 solar generator 40w panel review
- maxpeedingrods mxr4000gt dual fuel inverter generator review
- anker solix c300 DC power review
- anker solix s2000 portable power station review
- Anker SOLIX C1000 1,056Wh Power Station Review (2026): A Spec-Based Look
- Anker SOLIX C2000 Gen 2 Review (2026): 2,048Wh, 2,400W, TT-30 RV Port
- Anker SOLIX F3800 Renewed Review (2026): 3,840Wh, 6,000W, 120V/240V
- anker solix bp2000 2 046wh expansion review
- ring battery doorbell review
