Anker SOLIX C2000 Gen 2 + BP2000 Expansion Battery Review: 4,096Wh Set
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This listing sells the Anker SOLIX C2000 Gen 2 together with its BP2000 expansion battery, for 4,096Wh of LiFePO4 storage behind a 2,400W inverter that peaks at 4,000W. Buying the pair at once is the point: the station alone holds about 2kWh, and the BP2000 doubles it. Anker quotes 80% in 45 minutes and a full charge in 58 minutes, plus a 9W idle draw, and claims a dual-door fridge runs up to 64 hours on the full set. The two units ship in separate packages. We worked from Anker's listings, not from a unit on the bench.
What stands out
- 4,096Wh LiFePO4 (station + BP2000)
- 2,400W rated, 4,000W peak
- 80% in 45 min, full in 58 min
- 9W idle consumption
- Battery-to-host cable in the box
- Station and battery ship separately
Who it fits
Good fit for
Home-backup and RV owners who already know they need about 4kWh and would rather buy the C2000 Gen 2 and its BP2000 battery in one order.
Who should skip it
Buyers who want one unit they can carry: each half weighs about 41.7 lb on its own listing, and 2kWh may be all a weekend trip needs.
Verdict: A sensible way to get a 4kWh Anker setup in one order, as long as you can handle two heavy boxes.
C2000 Gen 2 + BP2000 numbers in context
4,096Wh total
Anker says a dual-door fridge runs up to 64 hours on the pair.
2,400W rated / 4,000W peak
Anker claims most window and RV air conditioners can start on it.
58 min full recharge
Anker quotes 80% in 45 minutes from AC or solar.
9W idle draw
Low standby loss helps when a small fridge is the only load.
BP2000: 4,000 cycles, 5-year warranty
Taken from Anker's own BP2000 listing.
75.4 lb weight field
Each unit is listed at 41.7 lb elsewhere, so the combined figure looks low.
Two boxes, one system
The C2000 Gen 2 and the BP2000 measure about 18.1 x 9.8 x 10.1 in each and link with the battery-to-host cable in the box, along with an AC charging cable, a quick start guide, a safety manual and a warranty card. The listing also carries bullets about 23% panel efficiency, four stand angles and IP67; those describe a solar panel, and no panel appears in the box list, so treat them as copied text. The bundle weight field of 75.4 lb does not match the 41.7 lb Anker gives for each unit on its separate listings.
Running the 4kWh Anker set
Set the station on top of or beside the BP2000, connect the host cable, and the pair acts as one 4,096Wh bank. At 9W idle, a portable fridge can run for days; Anker puts it at about a week on the station alone. The bare C2000 Gen 2 listing also names a TT-30 RV socket and an optional 800W alternator charger, which are worth confirming on Anker's spec page for this bundle.
Before ordering the C2000 Gen 2 bundle
Check weight, ports and shipping.
Check before you buy
- You can move two units of about 41.7 lb each for the C2000 Gen 2 set
- You confirm the C2000 Gen 2 port list on Anker's page
- You track two separate deliveries for the station and BP2000
- You do not expect a solar panel in this C2000 Gen 2 box
The product at a glance
Anker SOLIX C2000 Gen 2 with Expansion Battery
Best for: 4kWh home backup
- Running Wattage
- 2,400W
- Surge Wattage
- 4,000W
- Capacity
- 4096Wh
- Battery Chemistry
- LiFePO4
- Application
- Home, Outdoor, Emergency
- Dimensions
- 18.1 × 9.8 × 10.1 inches
View on Amazon: Anker SOLIX C2000 Gen 2 with Expansion Battery Affiliate link
Anker's C2000 Gen 2 station with its BP2000 expansion battery: 4,096Wh LiFePO4, 2,400W output with 4,000W peak, a 58-minute full recharge and a 9W idle draw.
Pros
- 4,096Wh in one order
- 58 min full recharge
- 9W idle draw
- BP2000 rated 4,000 cycles
Cons
- Two heavy boxes
- Weight field conflicts
- Copied panel bullets
Good fit if
- You want 4kWh of Anker storage in one order
- You run a fridge for days during outages
Skip if
- You need a single unit you can carry
- About 2kWh covers your C2000 Gen 2 use
Verdict: A 4kWh Anker setup bought in one go.
Specifications side by side
| Spec | Anker SOLIX C2000 Gen 2 with Expansion Battery |
|---|---|
| Running Wattage | 2,400W |
| Surge Wattage | 4,000W |
| Capacity | 4096Wh |
| Battery Chemistry | LiFePO4 |
| Wattage | 2400W |
| Application | Home, Outdoor, Emergency |
| Dimensions | 18.1 × 9.8 × 10.1 inches |
| Weight | 75.4 pounds |
| Color | Gray |
| Model | A1783 |
Frequently asked questions
How much capacity does the C2000 Gen 2 + BP2000 bundle have?
4,096Wh of LiFePO4, about half in the station and half in the BP2000.
How fast does the C2000 Gen 2 bundle recharge?
Anker quotes 80% in 45 minutes and 100% in 58 minutes.
Does the C2000 Gen 2 + BP2000 listing include a solar panel?
No. The box list names only the station, the BP2000, cables and paperwork.
What warranty does the BP2000 in this bundle carry?
Anker's BP2000 listing states five years and 4,000 cycles.
Do the C2000 Gen 2 and BP2000 arrive together?
No, Anker ships them separately; check both tracking labels.
Featured in
See also
- daranener youyo r100 89 6wh power station review
- aferiy p310 3840wh portable power station review
- aferiy p280 2048wh expansion battery review
- anker solix c300 DC power review
- anker solix s2000 portable power station review
- Anker SOLIX C1000 1,056Wh Power Station Review (2026): A Spec-Based Look
- Anker SOLIX C2000 Gen 2 Review (2026): 2,048Wh, 2,400W, TT-30 RV Port
- Anker SOLIX F3800 Renewed Review (2026): 3,840Wh, 6,000W, 120V/240V
- anker solix c2000 gen 2 review
- anker soundcore soundcore anker space 2 review
