Anker SOLIX PS100 Bifacial Solar Review: Who It Fits and Who Should Skip It

What stands out

• N-type solar cells provide 25%+ conversion efficiency for faster charging
• Bifacial design harvests energy from front and rear surfaces
• IP68 rating ensures protection against water and dust ingress
• Weighs only 6.28 pounds for easy carrying and setup
• Foldable construction fits in compact storage spaces

Who it fits

Key specs explained for this panel

Rated Power: 100W

This value indicates the maximum electricity the panel generates under ideal laboratory conditions. In real-world use, you will likely see lower output due to angle, heat, or clouds. This output level suits charging small devices or topping off a battery pack slowly. It is not enough to run high-draw appliances like microwaves or space heaters directly.

Weight: 6.28 pounds

This lightweight frame makes the unit easy to carry on hikes or move around a campsite. It is significantly lighter than standard 100W panels, which often exceed 9 pounds. You can pack it into a backpack or carry it with one hand. This portability is ideal for solo travelers or anyone who values minimal gear weight.

Cell Type: N-type

N-type cells are a modern solar technology that loses less energy when temperatures rise. This means the panel maintains better performance during hot summer days compared to older cell types. You get more consistent power output in demanding conditions. This spec is a key indicator of long-term reliability and efficiency for outdoor enthusiasts.

IP Rating: IP68

This rating confirms the panel is dust-tight and can withstand submersion in water for extended periods. You can use it in heavy rain, mud, or near streams without fearing damage. It offers robust protection for camping or outdoor work. This level of weather resistance exceeds typical outdoor gear, giving you peace of mind in unpredictable environments.

Conversion Efficiency: 25%+

This percentage shows how much sunlight the panel converts into usable electricity. A figure above 25% is high for this size, meaning you get more power from the same surface area. This is useful when space is limited, such as on a small table or tent floor. It helps you charge devices faster than lower-efficiency panels.

Build Quality and Physical Design

The listing describes a reinforced aluminum frame paired with impact-resistant materials. This construction supports an IP68 rating for water and dust resistance. You can rely on this protection in rain or muddy conditions without worrying about internal damage. The panel itself is black and measures 40.6 inches in height by 23.6 inches in length. When folded, the thickness is just 0.67 inches. This compact profile allows you to tuck it into tight spaces in a car trunk or backpack.

Weight is a major factor here. According to the listing, the unit weighs 6.28 pounds including the stand. This is about 10% lighter than the previous version and over 30% lighter than typical 100W panels. The reduced mass makes it easier for you to carry and set up in remote locations. The bifacial layout captures sunlight from both front and rear surfaces. This design choice maximizes energy harvest in reflective environments like snow, sand, or concrete.

The foldable nature of the panel allows for convenient storage and transport. You do not need complex assembly tools. The included stand helps position the panel for optimal sun exposure. The finish is durable enough to handle outdoor elements. You get two charging cables with the unit, which simplifies connection to your power station. The physical design prioritizes portability and resilience over bulk.

Setup And Daily Use Guide

Setting up this panel begins with unpacking the contents. You receive the PS100 Bifacial Portable Solar Panel, two 8.2 ft charging cables, one 1.6 ft XT60i cable, a quick start guide, and a safety card. The unit weighs 6.28 pounds, which is 10% lighter than the previous version. This low weight makes carrying and positioning the panel easier. The dimensions are 40.6 inches long, 23.6 inches wide, and 0.67 inches thick. The foldable design allows you to adjust the angle for optimal sun exposure.

Daily use involves placing the panel in an area with direct sunlight. The bifacial feature captures energy from both the front and rear surfaces. This dual-sided output works best in reflective environments like snow, sand, or concrete. You can expect up to 10% more power in these conditions. The N-type solar cells maintain high conversion efficiency, over 25%, even in high temperatures. This minimizes energy loss during peak heat.

The IP68 rating ensures protection against rain, mud, and dust. You can leave the panel outdoors without concern for water damage. The reinforced aluminum frame adds durability. You connect your power station using the included cables. The 8.2 ft cables provide flexibility in placement. The 1.6 ft XT60i cable offers a shorter connection option. This setup suits camping trips and home backup scenarios. The lightweight build and robust weather resistance make it practical for frequent moves.

Before You Buy This Solar Panel

You need a compatible power station to use this panel. Check the input voltage and current limits of your device. The included XT60i cable suggests it pairs well with Anker SOLIX units, but verify connectors on your generator. You may need a Y-splitter if you plan to add another panel later for faster charging. Upkeep is simple. Wipe the N-type cells with a soft cloth when dust accumulates. The IP68 rating protects against rain, but standing water can reduce bifacial gain. Keep the aluminum frame clean to maintain heat dissipation. This 100W option sits in the middle of the three available styles. The PS400 offers more power for larger loads, while the PS200 bridges the gap. Choose this model if you prioritize weight savings over raw output. It fits well for solo camping trips or as a supplementary source for home backup systems where portability matters more than peak wattage.

Check before you buy

• Verify your power station accepts the XT60i input connector
• Check if your generator handles bifacial input voltage limits
• Ensure your camping spot has reflective ground for rear gain
• Confirm you have enough space for the unfolded 40.6-inch panel

The product at a glance

1

Anker SOLIX PS100 Bifacial Solar Panel

Best for: lightweight outdoor camping and travel

Rated Power

100W

Conversion Efficiency

25%+

Panel Type

Bifacial, foldable

Cell Type

N-type

IP Rating

IP68

Weight

7 lb

View on Amazon: Anker SOLIX PS100 Bifacial Solar Panel Affiliate link

The Anker SOLIX PS100 is a 100W bifacial solar panel designed for camping and home use. It features N-type cells with over 25% conversion efficiency and captures sunlight from both sides. Weighing just 6.28 pounds, it is significantly lighter than typical 100W panels. The IP68 rating ensures protection against rain and dust. This unit suits users needing a durable, lightweight charging solution for reflective environments.

Pros

• Bifacial design captures sunlight from front and rear surfaces
• N-type cells deliver over 25% conversion efficiency
• IP68 waterproof and dust resistant rating
• Weighs only 6.28 pounds for easy portability

Cons

• 100W output is lower than higher-wattage alternatives
• Only includes a 5-year warranty
• Foldable design may be less robust than rigid panels

Good fit if

• You need a lightweight panel for backpacking or camping
• You operate in bright, reflective environments like snow or sand
• You require weather-resistant gear for outdoor use

Skip if

• You need high wattage for heavy power demands
• You prefer rigid panels for permanent installations
• You want a longer warranty period than five years

Verdict: Anker SOLIX PS100 Bifacial Solar Panel fits campers who prioritize weight savings and weather resistance over raw power output.

Specifications side by side

Frequently asked questions

See also

• anker solix ps100 bifacial solar alternatives
• best generators under 100
• anker solix c300 60w solar review
• botluxe ps100 solar pool skimmer review