BLUETTI PV350 350W Foldable Solar Panel Review (2026): A Spec-Based Look
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The BLUETTI PV350 is a 350W folding panel for owners of mid-size and large stations who want a lot of solar input from one unit. It uses 23.4% efficient monocrystalline cells under an ETFE coating, has an adjustable kickstand, and ends in an MC4 connector. BLUETTI names the AC70, AC180, AC240, AC200L, Elite 200 V2, AC300 with B300K and AC500 with B300K as compatible. The trade-off is bulk: 30.6 lb and 35.6 x 24.1 in folded. The title claims IP67, while the bullets only mention resistance to water splashes, and the box holds the panel and a manual only, so any MC4 adapter cable for your station is a separate purchase. This look relies on BLUETTI's own listing, not on testing.
What stands out
- 350W from one folding panel
- 23.4% monocrystalline cells under ETFE
- MC4 output, listed for many BLUETTI stations
- Adjustable kickstand
- 30.6 lb, 35.6 x 24.1 in folded
Who it fits
Good fit for
Owners of a BLUETTI AC180, AC240, AC200L, Elite 200 V2 or AC300/AC500 setup who want one large panel instead of several small ones, and who move it by car.
Who should skip it
Anyone who carries a panel any distance, owners of small stations whose solar input is well under 350W, and buyers who expect a station cable in the box.
Verdict: A strong single-panel solar input for mid-size and large BLUETTI stations; heavy, and the cable is extra.
BLUETTI PV350 specs explained
350W rated
Close to the solar cap of many mid-size stations from one panel.
23.4% monocrystalline cells
BLUETTI's efficiency figure; output drops in cloud but does not stop.
MC4 connector
Standard solar plug; most stations need an MC4 adapter, not included here.
Compatible list
AC70, AC180, AC240, AC200L, Elite 200 V2, AC300 + B300K, AC500 + B300K.
30.6 lb, 35.6 x 24.1 x 2.5 in folded
A car-trunk panel, not a backpack one.
IP67 in title, splash resistance in bullets
Treat it as weather-resistant and avoid standing water.
PV350 build and box contents
The PV350 folds into a large flat case with an adjustable kickstand on the back. The ETFE coating is meant to resist scratches and splashes. In the box there is only the panel and the user manual: no MC4-to-DC7909 or other station cable, no extension. The listing also leaves out Voc, current and the number of folds, which matter if you plan to pair two PV350s on one station input.
Where one 350W panel makes sense
On a long camping stay with a BLUETTI AC180 or Elite 200 V2, one PV350 set up on its kickstand near the car can feed most of the station's solar input in good sun, without wiring several small panels together. For home outage backup with an AC300 + B300K, two or more PV350s make a reasonable array. Choose the PV350 if your station takes 350W or more of solar and you drive to where you set up; choose a 100-200W folder if you hike in or your station's solar input is small.
Before buying the BLUETTI PV350
Check your station's input and plan the cable.
Check before you buy
- Your station's solar input accepts 350W and the PV350's voltage (check the label for Voc)
- You have or will buy an MC4 adapter cable for the PV350
- You can lift and stow a 30.6 lb BLUETTI panel
- You will keep the PV350 out of standing water despite the IP67 title
The product at a glance
BLUETTI 350W Waterproof Foldable Solar Panel
Best for: Mid-size and large BLUETTI stations
- Rated Power
- 350W
- Conversion Efficiency
- 23.4%
- Panel Type
- Foldable
- Cell Type
- Monocrystalline
- IP Rating
- IP67
- Weight
- 30.6 pounds
View on Amazon: BLUETTI 350W Waterproof Foldable Solar Panel Affiliate link
A 350W folding panel with 23.4% mono cells, ETFE coating, adjustable kickstand and MC4 output. 30.6 lb, 35.6 x 24.1 x 2.5 in folded. Listed for the AC70, AC180, AC240, AC200L, Elite 200 V2, AC300 and AC500. Box holds the panel and manual only; title IP67 vs splash-resistant bullets.
Pros
- 350W from one panel
- 23.4% cells
- Kickstand
- Wide BLUETTI compatibility list
Cons
- 30.6 lb
- No cable in the box
- IP67 claim not backed in bullets
Good fit if
- You own a mid-size or large BLUETTI
- You set up near your car
Skip if
- You hike to your campsite
- Your station's solar input is under 200W
Verdict: A big single-panel input for BLUETTI stations; heavy and cable sold separately.
Specifications side by side
| Spec | BLUETTI 350W Waterproof Foldable Solar Panel |
|---|---|
| Rated Power | 350W |
| Conversion Efficiency | 23.4% |
| Panel Type | Foldable |
| Cell Type | Monocrystalline |
| IP Rating | IP67 |
| Weight | 30.6 pounds |
| Application | Camping, Outdoor |
| Features | Kickstand |
| Water Resistance | Waterproof |
| Dimensions | 35.6 × 24.1 × 2.5 inches |
| Model | PV350 |
Frequently asked questions
Which BLUETTI stations work with the PV350?
BLUETTI lists the AC70, AC180, AC240, AC200L, Elite 200 V2, AC300 with B300K and AC500 with B300K.
How heavy is the BLUETTI PV350 350W panel?
30.6 lb, folding to 35.6 x 24.1 inches.
Does the BLUETTI PV350 come with a cable?
The box lists only the panel and a user manual; the panel ends in an MC4 connector.
Is the BLUETTI PV350 waterproof?
The title says IP67, while the bullets describe splash resistance; keep it out of standing water.
What cell efficiency does the BLUETTI PV350 have?
Up to 23.4% with monocrystalline cells.
See also
- yctechcam 5w solar panel security review
- jjn 200w bifacial rigid solar panel review
- generac gs100 100w solar panel review
- best generators under 100
- best generators under 150
- Best Generators Under $200 in 2026: 9 Picks Ranked by Specs
- Best Generators Under $300: 9 Spec-Based Picks
- 8 Best Generators Under $500, Compared
- twelseavan 500w portable solar panel review
- sanpyl portable solar charging electronic review
