BTQSOL MC4 Solar Y Branch Connector Pair Review
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
BTQSOL sells exactly one pair of MC4 Y branch connectors: an M/FF (one male to two female) and an F/MM (one female to two male). Together they wire two solar panels in parallel so both feed one MC4 lead into a station, charge controller or MC4 adapter. BTQSOL rates them at 30A and DC 1000V, says they take 11-14AWG (1.5-6 mm²) cable, and gives an IP68 rating from a gasket in the male connector, with PPO housings that resist UV and heat. The pair weighs 3.84 oz. We reviewed BTQSOL's listing, not the connectors in hand.
What stands out
- One M/FF + one F/MM
- 30A, DC 1000V
- IP68, gasket in the male connector
- PPO housings, UV and heat resistant
- 11-14AWG (1.5-6 mm²) cable fit
Who it fits
Good fit for
Anyone adding a second matching panel to a portable setup who needs just one parallel pair with a stated water rating.
Who should skip it
Builders who need two or more pairs, series wiring, or connectors for panels with 8mm or Anderson leads.
Verdict: A single, IP68-rated parallel pair; enough for a two-panel setup and nothing more.
BTQSOL Y pair specs, in practice
M/FF + F/MM, one each
Exactly what one two-panel parallel join needs: one for positive, one for negative.
30A
Two panels' combined current must stay under this and under the station's input limit.
DC 1000V
Well above any portable or RV panel string.
IP68
Rated for rain and dust; keep the joints off standing water anyway.
11.8 x 2.3 x 0.75 in, 3.84 oz
Light enough to leave clipped to the panel leads.
BTQSOL build details
The housings are PPO plastic in red and black, which tells the two branch types apart at a glance. The male connector carries a waterproof gasket and an integrated lock you press to release. BTQSOL does not give the length of the short pigtails or name a certification body, and the spec fields list the pair as the model name.
Joining two panels with the BTQSOL pair
Connect each panel's positive lead to one branch and each negative lead to the other, then send the two single ends to your MC4 adapter or controller. In parallel, voltage stays at one panel's level and current doubles, which suits stations with a low input-voltage ceiling. Pick the BTQSOL pair for one tidy two-panel join; pick a two-pair set if you plan to add a third or fourth panel or want a spare.
Before buying the BTQSOL Y connectors
Small item, three checks.
Check before you buy
- Both panels have MC4 leads that fit the BTQSOL pair
- The two panels' current added together stays under your station's limit
- One BTQSOL pair is all you need for this build
The product at a glance
BTQSOL MC4 Solar Y Branch Connector Pair
Best for: Two-panel parallel joins
- Connector Type
- MC4
- Wire Gauge
- 11-14AWG
- Voltage
- DC 1000V
- IP Rating
- IP68
- Application
- RV, Off-Grid, Marine
- Dimensions
- 11.8 × 2.3 × 0.75 inches
View on Amazon: BTQSOL MC4 Solar Y Branch Connector Pair Affiliate link
One M/FF + one F/MM MC4 Y branch for two-panel parallel wiring; 30A, DC 1000V, IP68, PPO housings, 11-14AWG cable, 3.84 oz.
Pros
- IP68 rating stated
- Exactly one parallel pair
Cons
- Pigtail length not listed
- Only one pair in the pack
Good fit if
- You add a second MC4 panel in parallel
- You want a stated IP68 rating
Skip if
- You need several pairs
- You wire panels in series
Verdict: A small, sealed parallel pair for two-panel setups.
Specifications side by side
| Spec | BTQSOL MC4 Solar Y Branch Connector Pair |
|---|---|
| Connector Type | MC4 |
| Wire Gauge | 11-14AWG |
| Voltage | DC 1000V |
| IP Rating | IP68 |
| Application | RV, Off-Grid, Marine |
| Output Ports | MC4 |
| Dimensions | 11.8 × 2.3 × 0.75 inches |
| Weight | 3.84 ounces |
| Color | Red & Black |
| Model | 1 Pair M/FF and F/MM |
Frequently asked questions
How many BTQSOL connectors come in the pack?
Two: one M/FF and one F/MM, which make one parallel pair.
Are the BTQSOL Y connectors waterproof?
BTQSOL rates them IP68, with a gasket in the male connector.
What cable sizes fit the BTQSOL Y branch?
11-14AWG, or 1.5 to 6 mm².
What are the BTQSOL connectors rated for?
30A at DC 1000V.
Featured in
See also
- aeternasol 45 inch solar panel tilt mount 2 sets review
- gbachoose stainless steel folding solar panel stand 2 pack review
- callsun 7 5w solar battery maintainer review
- best generators under 100
- best generators under 150
- Best Generators Under $200 in 2026: 9 Picks Ranked by Specs
- Best Generators Under $300: 9 Spec-Based Picks
- 8 Best Generators Under $500, Compared
- tidyard solar shower review
- garmin instinct solar review
