Callsun or ALLPOWERS? Solar Panels Compared in 2026
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
When comparing callsun vs ALLPOWERS solar panel options, you face two distinct paths for portable power. Both offer 200W monocrystalline cells and IP68 waterproof ratings for outdoor reliability. The main difference lies in form factor and efficiency. Callsun provides a rigid, bifacial design with higher peak efficiency for fixed or semi-permanent mounts. ALLPOWERS offers a foldable, lightweight panel designed for easy transport and quick setup during travel.
Key differences
| Aspect | Callsun 400W Bifacial Solar Panel 2-Pack | ALLPOWERS SE200 200W Foldable Solar Panel |
|---|---|---|
| Panel Type | Bifacial rigid | Foldable |
| Conversion Efficiency | 25.6% | 23%-25% |
| Weight | 23.8 pounds | 15.8 pounds |
| Dimensions (Folded/Flat) | 51.3 × 30.3 × 1.4 inches | 23 × 21.4 × 1.18 inches |
| Busbar Count | 16BB | not listed |
| Working Voltage | 47.48V Vmp | 41.6V |
Which one should you choose?
Choose Callsun 400W Bifacial Solar Panel 2-Pack if
- You need maximum efficiency and bifacial energy capture for RVs or rooftops.
- You prefer a rigid panel that resists physical damage during long-term outdoor use.
- You want higher voltage output to match portable power stations with higher input limits.
Choose ALLPOWERS SE200 200W Foldable Solar Panel if
- You prioritize portability and need a lightweight panel for hiking or camping.
- You want a compact, foldable design that fits easily into a backpack or small vehicle.
- You need a panel that can be adjusted at various angles using an integrated kickstand.
Verdict: Choose the Callsun panel if you value higher efficiency, bifacial technology, and a durable rigid build for semi-permanent installations. Select the ALLPOWERS SE200 if your priority is lightweight portability and a foldable form factor for frequent travel and outdoor adventures.
Callsun vs ALLPOWERS Solar Panel Guide
Panel efficiency
Callsun offers a 25.6% conversion efficiency rating for its N-type monocrystalline cells. This specific figure represents the upper bound of performance for the rigid bifacial design. ALLPOWERS provides a range of 23% to 25% efficiency for its monocrystalline cells. While both utilize high-quality silicon, Callsun publishes a precise maximum that slightly exceeds the top of ALLPOWERS' stated range. For you, this means Callsun may capture more sunlight per square foot under ideal conditions. The difference is marginal but measurable in raw output potential.
Portability and weight
ALLPOWERS weighs 15.8 pounds and folds down to 23 x 21.4 x 1.18 inches. This compact form factor makes it easy to carry in a backpack or store in a small vehicle compartment. Callsun weighs 23.8 pounds per panel and measures 51.3 x 30.3 x 1.4 inches. It is a rigid panel that requires more space and physical effort to move. If you hike or camp frequently, ALLPOWERS is significantly easier to transport. Callsun is better suited for semi-permanent installations on RVs or rooftops where weight matters less.
Bifacial capabilities
Callsun features a bifacial design with a transparent backsheet that captures reflected and diffuse light from the rear. This allows for additional energy generation when installed above reflective surfaces. ALLPOWERS is a standard monofacial panel that only captures light from the front side. It does not offer rear-side power generation. For you, Callsun provides a unique advantage in environments with high ground reflection, such as snow or sand. ALLPOWERS relies solely on direct front-side irradiance for its 200W output.
Voltage and compatibility
Callsun operates at 47.48V Vmp and 54.62V Voc, designed to pair two panels in series for 400W total power. This configuration suits portable power stations with 60V-class solar input limits. ALLPOWERS operates at a standard 41.6V working voltage. It connects directly to most 12V/24V systems and portable power stations without requiring series configurations for basic charging. ALLPOWERS offers simpler plug-and-play compatibility for single-panel setups. Callsun requires more complex wiring if you want to maximize input voltage for specific high-voltage input devices.
Shading performance
Callsun includes a TwinCell anti-shading design that divides the panel into two independently operating sections. If one side is shaded by trees or buildings, the other continues generating power. ALLPOWERS uses standard series-connected monocrystalline cells without specific anti-shading segmentation mentioned in the data. Partial shading on an ALLPOWERS panel can disproportionately reduce the output of the entire unit. Callsun maintains more consistent energy production in partially shaded environments, making it more reliable for variable outdoor conditions.
Temperature coefficient
Callsun has a low temperature coefficient of -0.30%/K, which helps reduce power loss as temperatures rise. This supports stable energy generation during hot summer conditions. ALLPOWERS does not list a specific temperature coefficient in the provided data. Without this specification, it is unclear how much power ALLPOWERS loses in high heat compared to Callsun. If you live in a hot climate, Callsun’s published coefficient suggests better performance retention. You should prioritize this spec if your solar setup faces high ambient temperatures.
Choose the right solar panel for you
RV owners needing high output in limited space
The Callsun 400W bifacial panel delivers 25.6% efficiency and captures rear-side light. Its rigid design suits RV rooftops, offering 400W total power when paired. The low temperature coefficient ensures stable performance in heat, making it ideal for space-conscious off-grid living.
Campers prioritizing portability and easy setup
The ALLPOWERS SE200 folds to 23x21.4x1.18 inches and weighs just 15.8 lbs. It includes a kickstand for angle adjustment and a carry handle. This foldable design is perfect for hiking, camping, or any scenario where you need to transport gear easily and set up quickly.
Users wanting maximum efficiency per square inch
Callsun achieves 25.6% conversion efficiency with N-type cells and 16BB busbars. This rigid panel maximizes power output within its 51.3x30.3 inch footprint. If you have fixed mounting space and want the highest possible energy generation from a single panel, this spec-focused choice is best.
The products compared
Callsun 400W Bifacial Solar Panel 2-Pack
Best for: High-efficiency fixed or RV mounts
- Rated Power
- 400W
- Conversion Efficiency
- 25.6%
- Panel Type
- Bifacial
- Cell Type
- N-type monocrystalline
- System Voltage
- 12V/24V
- Busbar Count
- 16BB
View on Amazon: Callsun 400W Bifacial Solar Panel 2-Pack Affiliate link
This Callsun 200W panel uses N-type monocrystalline cells to achieve 25.6% conversion efficiency. Its bifacial design captures light from both sides, while the TwinCell layout reduces shading losses. You can pair two units in series for 400W total output. It weighs 23.8 pounds and measures 51.3 by 30.3 inches. This rigid panel suits RVs, marine use, and off-grid setups where high efficiency and heat tolerance matter.
Pros
- 25.6% conversion efficiency with N-type cells
- Bifacial design captures rear-side light
- Low temperature coefficient of -0.30%/K
- TwinCell anti-shading design
Cons
- Rigid frame requires pre-drilled mounting holes
- Heavier at 23.8 pounds per panel
- Not a flexible or foldable design
Good fit if
- You need high efficiency in limited space
- You operate in hot climates
- You want bifacial energy gain
Skip if
- You need a lightweight portable panel
- You want a foldable design
- You prefer a single panel over a pair
Verdict: Callsun 200W Bifacial Solar Panel offers high efficiency and heat tolerance for fixed or semi-permanent installs. It fits users who prioritize output per square foot over portability.
ALLPOWERS SE200 200W Foldable Solar Panel
Best for: camping and RV power needs
- Rated Power
- 200W
- Conversion Efficiency
- 23%-25%
- Panel Type
- Foldable
- Cell Type
- Monocrystalline
- System Voltage
- 41.6V, 12V / 24V
- IP Rating
- IP68
View on Amazon: ALLPOWERS SE200 200W Foldable Solar Panel Affiliate link
The ALLPOWERS SE200 is a 200W foldable solar panel built for portable power needs. It uses monocrystalline cells to deliver 23% to 25% conversion efficiency. The unit weighs 15.8 lbs and measures 23 by 21.4 inches when folded. It features an IP68 waterproof rating and a 41.6V working voltage. This panel suits you if you need a durable, high-efficiency source for camping or RV trips.
Pros
- 23% to 25% conversion efficiency
- IP68 waterproof and dustproof rating
- Foldable design with carry handle
- Compatible with 12V and 24V systems
Cons
- Heavier than rigid panel options
- Lower wattage than bifacial models
- Requires manual angle adjustment
Good fit if
- You need a waterproof panel for outdoor use
- You want high efficiency in a portable form
- You power 12V or 24V devices
Skip if
- You need maximum wattage in one unit
- You prefer lightweight rigid panels
- You want automatic sun tracking
Verdict: ALLPOWERS SE200 200W Foldable Solar Panel offers strong efficiency and weather protection for campers who prioritize portability over raw power output.
Specifications side by side
| Spec | Callsun 400W Bifacial Solar Panel 2-Pack | ALLPOWERS SE200 200W Foldable Solar Panel |
|---|---|---|
| Rated Power | 400W | 200W |
| Conversion Efficiency | 25.6% | 23%-25% |
| Panel Type | Bifacial | Foldable |
| Cell Type | N-type monocrystalline | Monocrystalline |
| System Voltage | 12V/24V | 41.6V, 12V / 24V |
| Busbar Count | 16BB | not stated |
| IP Rating | IP68 | IP68 |
| Weight | 23.8 pounds | 11.1 pounds |
| Wattage | 200W | 200W |
| Application | Home, RV, Off-Grid, Marine | Camping, Outdoor, RV, Off-Grid |
| Voltage | 12V, 24V | not stated |
| Dimensions | 51.3 × 30.3 × 1.38 inches | 25.6 × 20.3 × 2.4 inches |
| Size | 200W 2-Pack Black | 200W-Foldable Solar Panel-SP033 |
| Color | Black | 200W-Foldable Solar Panel-SP033 |
| Model | CN200W | SE200 |
Frequently asked questions
Which solar panel is better for RV rooftop mounting?
The Callsun 400W Bifacial Solar Panel 2-Pack is the better choice for fixed RV installations. Its rigid design and high efficiency of 25.6% maximize power output in limited space. The bifacial cells capture rear-side light, boosting total generation. In contrast, the ALLPOWERS SE200 is foldable, making it less suitable for permanent rooftop mounting where durability and fixed positioning are key.
Are Callsun and ALLPOWERS panels waterproof?
Yes, both brands provide IP68 waterproof ratings for reliable outdoor performance. This specification ensures protection against dust and prolonged water immersion, which is essential for camping or marine use. The Callsun model utilizes N-type cells for enhanced heat tolerance, while the ALLPOWERS foldable design offers flexibility. Both constructions are built to withstand the elements during extended trips.
Which panel is lighter and easier to carry?
The ALLPOWERS SE200 is lighter and more portable for your trips. It weighs only 15.8 pounds, compared to the 23.8-pound weight of each Callsun 200W panel. The foldable form factor of the ALLPOWERS unit makes it simpler to pack and transport. This makes it ideal for campers who prioritize weight and convenience over the higher output of rigid panels.
Do I need two Callsun panels for 400W output?
Yes, you need two Callsun 200W panels to achieve 400W total output. The product is sold as a 2-Pack, combining two rigid units. Each panel delivers 200W individually, suitable for 12V or 24V systems. This setup is best for users who need high power density for fixed mounts, as the combined weight and size require a sturdy, permanent installation surface.
What is the difference between bifacial and foldable panels?
Bifacial panels, like the Callsun model, capture sunlight on both sides to increase efficiency. They are rigid and designed for fixed mounting on roofs or trailers. Foldable panels, such as the ALLPOWERS SE200, are portable and flexible. They are easier to set up on uneven ground but generally offer lower total output per square foot compared to high-efficiency rigid bifacial designs.
Which panel works better in hot climates?
The Callsun panel is better suited for hot climates due to its N-type cells and high heat tolerance. These cells maintain performance better under high temperatures than standard alternatives. The rigid construction also aids in heat dissipation. While the ALLPOWERS panel is efficient, its foldable design and lower efficiency range make the Callsun option more reliable for sustained output in intense heat.