HilapriSol 200W-BK-1B 200W N-Type Solar Panel Review: Who It Fits and Who Should Skip It
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The HilapriSol 200W-BK-1B is a single-sided 200W framed panel for 12V systems, with Grade A+ N-type cells in an 18-busbar half-cut layout rated up to 25.6%. At 52.8 x 26.4 x 1.18 in it is a standard full-size 200W footprint, and at 24.5 lb it is heavier than HilapriSol's bifacial 200W, which suits fixed mounting better than carrying. The face is 3.2mm low-iron tempered glass, the junction box is IP68, and HilapriSol lists a reverse-current blocking diode so a battery does not drain back through the panel at night. The rated temperature range is -40F to 185F. HilapriSol states 800-1000Wh a day from 4-5 sun hours; that is simply 200W times the hours, before losses. The listing names no connector type, Voc, Vmp or warranty, and one bullet calls it a "100 watt" panel, a copy error. This review is based on HilapriSol's listing alone.
What stands out
- 200W N-type, 18BB half-cut, up to 25.6%
- 3.2mm low-iron tempered glass
- IP68 junction box, blocking diode
- 52.8 x 26.4 in, 24.5 lb
Who it fits
Good fit for
RV, cabin and boat owners with a 12V lithium, AGM or lead-acid bank who want one full-size 200W roof panel that works with either a PWM or MPPT controller.
Who should skip it
Portable station users who need a folding panel, anyone who wants a stated warranty term or Voc before buying, and installs short on roof length.
Verdict: A solid single-sided 200W roof panel with a blocking diode; the missing warranty and Voc are the weak spots.
HilapriSol 200W-BK-1B figures in context
200W, 18BB half-cut N-type, 25.6% cells
Cell efficiency; whole-panel efficiency is always lower.
52.8 x 26.4 x 1.18 in
About 9.7 sq ft of roof per panel.
24.5 lb
Heavier than the 19.6 lb HilapriSol bifacial 200W-BF-1B.
IP68 junction box
Sealed against water ingress on roofs and decks.
Blocking diode
Stops reverse current from the battery at night.
-40F to 185F
Rated temperature range for the 200W-BK-1B.
How the HilapriSol 200W-BK-1B is built
HilapriSol vacuum-laminates the cells behind 3.2mm anti-reflective low-iron glass in an anti-corrosion aluminum frame, with pure copper output cables from an IP68 box. Pre-drilled holes fit most Z-brackets and tilt mounts, which are not included. HilapriSol quotes 2400Pa wind and 5400Pa snow loads.
Running the 200W-BK-1B on a 12V bank
HilapriSol says the panel works with PWM and MPPT controllers, in series or parallel. One panel on a 12V 100Ah battery can refill a good part of it on a sunny day, which is where the seller's 3-5 day camping claim comes from; real results depend on your loads. Ask HilapriSol which connector the leads end in before ordering extension cables.
Before ordering the HilapriSol 200W-BK-1B
Check these points first.
Check before you buy
- Your roof has 52.8 in of length for the HilapriSol frame
- You have Z-brackets or tilt mounts for the 200W-BK-1B
- You know the 200W-BK-1B connector type and Voc
- Your controller takes 200W on its 12V input
The product at a glance
HilapriSol 200W N-Type Solar Panel
Best for: Single-panel 12V roofs
- Rated Power
- 200W
- Conversion Efficiency
- 25%
- Cell Type
- N-Type monocrystalline
- System Voltage
- 12V
- Busbar Count
- 18BB
- IP Rating
- IP68
View on Amazon: HilapriSol 200W N-Type Solar Panel Affiliate link
A single-sided 200W 18BB N-type panel (52.8 x 26.4 in, 24.5 lb) with 3.2mm glass, IP68 box and blocking diode; no warranty, Voc or connector named.
Pros
- Blocking diode built in
- 3.2mm low-iron glass
- Works with PWM or MPPT on 12V
Cons
- No warranty term or Voc
- Connector type not named
Good fit if
- You run a 12V RV or boat bank
- You want one full-size 200W roof panel
Skip if
- You need a folding panel for a station
- You want HilapriSol's warranty in writing first
Verdict: A sturdy 12V roof panel with a few listing gaps.
Specifications side by side
| Spec | HilapriSol 200W N-Type Solar Panel |
|---|---|
| Rated Power | 200W |
| Conversion Efficiency | 25% |
| Cell Type | N-Type monocrystalline |
| System Voltage | 12V |
| Busbar Count | 18BB |
| IP Rating | IP68 |
| Weight | 24.5 pounds |
| Wattage | 200W |
| Application | RV, Marine |
| Features | Solar Charging |
| Water Resistance | Waterproof |
| Dimensions | 52.8 × 26.4 × 1.18 inches |
| Size | 200W 1 Pack Black |
| Color | Black |
| Model | 200W-BK-1B |
Frequently asked questions
Is the HilapriSol 200W-BK-1B bifacial?
No. It is the black single-sided model; HilapriSol sells a separate 200W-BF-1B bifacial panel at 19.6 lb.
How much does the HilapriSol 200W-BK-1B weigh?
24.5 lb, at 52.8 x 26.4 x 1.18 in.
What does the 200W-BK-1B blocking diode do?
It stops the battery from discharging back through the panel at night.
Is the HilapriSol 200W-BK-1B a 100W panel?
No. One bullet says "100 watt", but the title, model and size all describe a 200W panel.
What warranty comes with the HilapriSol 200W-BK-1B?
The listing does not state one; ask HilapriSol before buying.
See also
- goal zero flip 36 power bank review
- goal zero sherpa 100pd power bank 2 pack review
- cuddeback pw 3600 solar trail camera battery 2 pack review
- best generators under 100
- best generators under 150
- Best Generators Under $200 in 2026: 9 Picks Ranked by Specs
- Best Generators Under $300: 9 Spec-Based Picks
- 8 Best Generators Under $500, Compared
- geyoto 200w bifacial solar panel review
- arctwonder solar panel rooftop tent review
