As an Amazon Associate we earn from qualifying purchases. Affiliate disclosure

HilapriSol 400W Bifacial Solar Panel 2-Pack Review (2 x 200W)

Latest update:

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

The HilapriSol 400W-BF-2B is a pair of 200W bifacial panels, each 52.8 x 26.4 x 1.18 in. The 39.2 lb listing weight is the pair: HilapriSol's single 200W bifacial panel is listed at 19.6 lb. Cells are N-type A+ half-cut on 18 busbars at up to 25.6%, under 3.2 mm low-iron tempered glass with a clear backsheet, and HilapriSol claims up to 30% more from the rear side. Each panel has an IP68 junction box with blocking diodes and copper leads, a wind rating of 2400Pa against 5400Pa for snow load, and a -40 to 185 F range. The listing pitches it for 12V lithium, AGM and lead-acid banks through MPPT or PWM controllers. Our view: a good-value pair for a 12V RV or cabin roof; ask for Voc and Vmp before a series build. We relied on HilapriSol's listing and did not mount the panels.

What stands out

  • 2 x 200W bifacial, 400W total
  • N-type A+ half-cut 18BB, up to 25.6%
  • 52.8 x 26.4 in each, 39.2 lb for the pair
  • 3.2 mm low-iron glass, IP68 box with diodes
  • Rated 2400Pa wind, 5400Pa snow

Who it fits

Good fit for

RV, camper, boat and cabin owners running a 12V bank with an MPPT or PWM controller, who have room for two 4.4-ft panels and some light-colored surface below.

Who should skip it

Anyone who needs to carry panels to a campsite, or who wants Voc, Vmp and cable length before choosing a controller.

Verdict: Good-value bifacial pair for fixed 12V systems; the 30% rear gain is a best case.

HilapriSol 400W-BF-2B figures

2 x 200W bifacial

400W from the fronts; the backs add more only over bright ground.

Up to 25.6% cell efficiency

N-type half-cut cells, said to lose less power in heat.

52.8 x 26.4 x 1.18 in per panel

Two panels side by side need about 4.4 x 4.4 ft.

39.2 lb for the pair

Matches two of HilapriSol's 19.6 lb single panels.

IP68 box, blocking diodes

Diodes keep the battery from draining back at night.

12V systems, MPPT or PWM

Parallel for 12V; series raises voltage for MPPT.

HilapriSol bifacial build

Each panel is vacuum laminated and sealed, with 3.2 mm low-iron anti-reflective glass on an anti-corrosion aluminum frame and pre-drilled holes that fit common Z-brackets and tilt mounts. One bullet calls it a 100 watt solar panel, a copy slip; the title, spec fields and pack count all say 2 x 200W.

Running the HilapriSol 400W pair

Wired in parallel to a 12V bank, two 200W panels want a controller rated around 30-40A on the battery side. HilapriSol suggests 800-1000Wh a day from 4-5 hours of autumn sun, which is its own estimate rather than a measured figure. The bifacial backs earn their keep on tilt mounts over gravel, snow or a white roof; flat on a dark roof they add little. A portable station can use the pair only if its solar input accepts their voltage and current.

Before ordering the HilapriSol 400W 2-pack

Plan the install first.

Check before you buy

  • You have room for two HilapriSol panels at 52.8 x 26.4 in
  • Your controller handles 400W from the HilapriSol pair at your battery voltage
  • HilapriSol has given you the 400W-BF-2B Voc for series wiring
  • You have Z-brackets or tilt mounts for the HilapriSol pair

The product at a glance

HilapriSol 400W 2-Pack Bifacial Solar Panel

Best for: RV and cabin 12V roofs

Rated Power
200W
Conversion Efficiency
25%
Panel Type
Bifacial
Cell Type
N-Type monocrystalline
System Voltage
12V
Busbar Count
18BB

View on Amazon: HilapriSol 400W 2-Pack Bifacial Solar Panel Affiliate link

HilapriSol's 400W-BF-2B is two 200W bifacial N-type panels (52.8 x 26.4 in, 39.2 lb for the pair) with 3.2 mm glass and IP68 boxes, aimed at 12V systems. No Voc listed.

Pros

  • Two matched bifacial panels
  • Blocking diodes and IP68 boxes
  • Clear load and temperature ratings

Cons

  • No Voc, Vmp or cable length
  • 30% rear gain is a best case
  • One bullet mislabels the wattage

Good fit if

  • You are building a 400W 12V roof array with HilapriSol panels
  • You can tilt them over a light surface

Skip if

  • You need portable panels
  • You must know the HilapriSol voltages before buying

Verdict: A good-value 400W bifacial pair for fixed 12V installs.

Specifications side by side

Spec HilapriSol 400W 2-Pack Bifacial Solar Panel
Rated Power 200W
Conversion Efficiency 25%
Panel Type Bifacial
Cell Type N-Type monocrystalline
System Voltage 12V
Busbar Count 18BB
IP Rating IP68
Weight 39.2 pounds
Wattage 400W
Application Home, RV, Off-Grid, Marine
Features Solar Charging
Water Resistance Waterproof
Dimensions 52.8 × 26.4 × 1.18 inches
Size 200W 2 Pack Bifacial
Color Clear
Model 400W-BF-2B

Frequently asked questions

Is 39.2 lb the weight of one HilapriSol 400W-BF-2B panel?

No; it matches two of HilapriSol's 19.6 lb single panels, so it is the pair.

How big is each panel in the HilapriSol 400W-BF-2B pack?

52.8 x 26.4 x 1.18 in.

What batteries suit the HilapriSol 400W bifacial pair?

HilapriSol lists 12V lithium, AGM and deep-cycle lead-acid banks through MPPT or PWM controllers.

Does the HilapriSol 400W-BF-2B really add 30% from the back?

That is HilapriSol's upper figure; real gain depends on the surface under the panels.

What loads can the HilapriSol 400W-BF-2B panels take?

HilapriSol rates them for 2400Pa of wind pressure and 5400Pa of snow load.

See also