HQST 200W 12V Solar Panel 2-Pack (2 x 100W) Review
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This HQST set (HSP100DL-36x2-B) is two 100W 12V panels in a squarer shape than usual: each is 31.8 x 27.5 x 1.18 in, which HQST says is 11% smaller than a traditional 100W panel and easier to fit on short roof sections. The cells are 166mm Grade A+ monocrystalline at up to 23%, all EL tested. Connectors and junction box are IP65, the aluminum frame resists corrosion, and the panels are rated for 2400Pa wind and 5400Pa snow. Pre-drilled holes line up with HQST's own Z brackets and tilt mounts, which are sold separately. HQST backs the pair with a 5-year product assurance and 80% output after 25 years. The listed 16.3 lb is not marked as per panel or per pair, and no Voc, Vmp or current is given. The frame color is listed as white. We read this from HQST's listing; the panels were not mounted for this review.
What stands out
- Two 100W 12V panels, 200W total
- Square 31.8 x 27.5 x 1.18 in each
- 166mm Grade A+ cells, up to 23%
- IP65 connectors and junction box
- 5-year product assurance, 80% at 25 years
Who it fits
Good fit for
Owners of 12V RV, trailer, shed or boat systems whose roof has short, square gaps where a long 100W panel will not fit.
Who should skip it
Buyers who want N-type efficiency or a single 200W module, and anyone needing Voc figures before wiring.
Verdict: A sensible 200W starter pair for awkward roof shapes; budget for HQST's brackets.
HSP100DL-36x2-B specs in plain terms
2 x 100W, 12V
200W from two panels; wire in parallel for a 12V PWM controller or in series for MPPT.
31.8 x 27.5 x 1.18 in each
A squarer shape that fits between roof vents.
Up to 23%, 166mm A+ cells
Mainstream mono efficiency.
IP65 connectors and box
Protected against rain and splashes.
16.3 lb
Not marked as per panel or per pair.
5-year assurance, 80% at 25 years
HQST's product and output terms.
Square-format build
Each panel has 166mm Grade A+ mono cells behind glass in an anti-corrosion aluminum frame with pre-drilled holes on the back. HQST designed the hole pattern for its own Z brackets and tilt mounts, neither of which is included. The listing does not name the connectors or give cable lengths or an electrical table.
Fitting two square panels on a roof
Two 31.8 x 27.5 in panels can sit side by side across a narrow roof or in separate gaps between vents, where one long 200W panel would not fit. Ask HQST for the Voc before wiring in series to an MPPT controller. Choose this square pair if your roof space is broken up; choose HQST's single 200W N-type panel if you have one clear rectangle and want higher efficiency with fewer cables.
Before ordering the HQST 2 x 100W set
Fit and figures.
Check before you buy
- Your roof gaps fit 31.8 x 27.5 in HQST panels
- You have HQST Z brackets or other mounts
- You have the HSP100DL Voc for series wiring
- Your controller suits 200W on 12V
The product at a glance
HQST 200W 12V Monocrystalline Solar Panel Pair
Best for: Short RV and shed roofs
- Rated Power
- 100W
- Conversion Efficiency
- Up to 23%
- Cell Type
- Monocrystalline
- System Voltage
- 12V
- IP Rating
- IP65
- Weight
- 16.3 pounds
View on Amazon: HQST 200W 12V Monocrystalline Solar Panel Pair Affiliate link
Two 100W 12V panels in a square 31.8 x 27.5 x 1.18 in format with 23% Grade A+ cells, IP65 connectors and junction box, 2400Pa/5400Pa ratings and pre-drilled holes for HQST mounts. 5-year product assurance. Weight (16.3 lb) is not split per panel; no Voc listed.
Pros
- Fits short roof gaps
- Two panels for flexible layout
- 5-year assurance
Cons
- No voltage figures
- Mounts sold separately
- Weight unclear
Good fit if
- Your roof space is broken up
- You run a 12V system
Skip if
- You want one 200W module
- You need the HSP100DL Voc first
Verdict: A practical square-format pair for awkward roofs.
Specifications side by side
| Spec | HQST 200W 12V Monocrystalline Solar Panel Pair |
|---|---|
| Rated Power | 100W |
| Conversion Efficiency | Up to 23% |
| Cell Type | Monocrystalline |
| System Voltage | 12V |
| IP Rating | IP65 |
| Weight | 16.3 pounds |
| Wattage | 200W |
| Application | Camping, RV |
| Voltage | 12V |
| Dimensions | 31.8 × 27.5 × 1.18 inches |
| Color | White |
| Model | HSP100DL-36x2-B |
Frequently asked questions
How many panels are in the HQST HSP100DL-36x2-B?
Two 100W 12V panels.
What size is each HQST HSP100DL panel?
31.8 x 27.5 x 1.18 inches, about 11% smaller than a traditional 100W, per HQST.
What warranty covers the HQST HSP100DL-36x2-B?
A 5-year product assurance, with 80% output retention after 25 years.
Are mounts included with the HQST HSP100DL pair?
No; HQST Z brackets and tilt mounts are sold separately.
Is the 16.3 lb HQST HSP100DL weight per panel?
The listing does not say whether it is per panel or for both.
See also
- holdwell s 30w foldable solar panel review
- solarapex 100w flexible solar panel review
- hishen 195 watt solar panels review
- hqst 200w solar panel review
- hqst hpp100n 100w portable solar panel review
- HQST HSP200N-64L 400W (2 x 200W) N-Type Solar Panel 2-Pack Review: Who It Fits and Who Should Skip It
- HQST HSP100DL 400W (4 x 100W) 12V Solar Panel 4-Pack Review (2026): A Spec-Based Look
- HQST HSP200N-64LT 200W Bifacial N-Type Solar Panel Review: Who It Fits and Who Should Skip It
- renogy 200w foldable solar panel review
- arctwonder solar panel rooftop tent review
