MHPOWOS 220W 40V Foldable Solar Panel Review: Who It Fits
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The MHPOWOS 220W (model MH-SP-002) is a folding panel for power stations with one unusual trait: it runs at 40V rather than the 18-24V typical of 200W folders. MHPOWOS says this keeps output high, and it suits stations with wide-voltage solar inputs, but it also means some stations cannot take it at all, a point the listing itself repeats twice. If your station accepts 40V-class panels, this is the reason to pick it: one 220W panel without dropping into a station's low-voltage limit. Cells are 23.5% monocrystalline, the panel is IP67, and four kickstands hold it up. The listing does not name the output plug, gives no Voc figure, and mixes 200W and 220W in its bullets. Weight reads 17.8 lb in one field and 8.5 kg (about 18.7 lb) in another. We based this on MHPOWOS's listing, not hands-on testing.
What stands out
- 220W at 40V nominal
- 23.5% monocrystalline cells
- IP67 dust and water rating
- Four kickstands, adjustable angle
- About 18 lb, folds to roughly 24 x 22.3 x 2.5 in
Who it fits
Good fit for
Owners of EcoFlow, Anker, Jackery or BLUETTI stations whose solar input accepts 40V-class panels and who want about 200W from one folder.
Who should skip it
Owners of small stations with low solar input voltage limits (often 12-28V), and anyone who needs the plug type or Voc confirmed before ordering.
Verdict: A 40V, 220W folder that fits wide-input stations well and small ones not at all.
MH-SP-002 numbers explained
220W, 40V
Higher voltage means lower current in the cable; your station must accept that voltage on its solar port.
23.5% mono cells
Typical for current folders; nothing unusual.
IP67
Rated for rain and dust; still keep the junction box out of puddles.
Four kickstands
Stands the panel on flat ground at an adjustable angle.
17.8 lb vs 8.5 kg
The listing gives two weights; plan on about 18-19 lb.
Station input caps
MHPOWOS notes a station with, say, a 100W input will only draw 100W from this panel.
Folding build and handles
The MH-SP-002 folds into a case with thickened handles and opens onto four kickstands. MHPOWOS describes the output only as standard solar interfaces, plug and play, and never names the connector or lists a cable, so ask the seller before relying on XT60, Anderson or MC4. The listing gives no warranty term and no Voc, which matters at 40V: check the label against your station's maximum input voltage before connecting.
Charging a station from the MHPOWOS 220W
Open the panel, set the four kickstands toward the sun and connect it to a station whose solar port accepts at least the panel's open-circuit voltage. A station with a 200W or larger input will make the most of it. Choose the MH-SP-002 if your station handles 40V-class panels and you want about 200W from one folder; choose an 18-20V 200W panel if your station's input voltage is limited or you are unsure.
Before buying the MHPOWOS MH-SP-002
Most problems with this panel come from voltage, so start there.
Check before you buy
- Your station's solar input accepts a 40V-class MHPOWOS panel
- You have confirmed the MH-SP-002 output plug with the seller
- You can carry about 18-19 lb for the MHPOWOS 220W
- Your station's input rating makes 220W worth it
The product at a glance
MHPOWOS 220W Foldable Solar Panel
Best for: Wide-input power stations
- Rated Power
- 220W
- Conversion Efficiency
- 23.5%
- Panel Type
- Foldable
- Cell Type
- Monocrystalline silicon
- System Voltage
- 40V
- IP Rating
- IP67
View on Amazon: MHPOWOS 220W Foldable Solar Panel Affiliate link
A 220W foldable panel running at 40V, with 23.5% mono cells, an IP67 rating and four kickstands. Weight is listed as both 17.8 lb and 8.5 kg. The connector, cable, Voc and warranty are not named, and some stations cannot accept its voltage.
Pros
- 220W in one folder
- IP67
- Four kickstands
Cons
- 40V not accepted by every station
- Plug not named
- Two different weights listed
Good fit if
- Your station takes 40V-class panels
- You want about 200W from one folder
Skip if
- Your station has a 12-28V solar input
- You need MH-SP-002 cable details first
Verdict: A 40V folder for wide-input stations only.
Specifications side by side
| Spec | MHPOWOS 220W Foldable Solar Panel |
|---|---|
| Rated Power | 220W |
| Conversion Efficiency | 23.5% |
| Panel Type | Foldable |
| Cell Type | Monocrystalline silicon |
| System Voltage | 40V |
| IP Rating | IP67 |
| Weight | 17.8 pounds |
| Wattage | 220W |
| Application | Camping, RV, Off-Grid |
| Features | Solar Charging, Kickstand |
| Water Resistance | Waterproof |
| Dimensions | 24 × 22.3 × 2.5 inches |
| Size | 220W |
| Color | 40V/220W Solar Panel |
| Model | MH-SP-002 |
Frequently asked questions
Why is the MHPOWOS MH-SP-002 a 40V panel?
MHPOWOS says the higher voltage keeps output high, but it warns that some stations cannot accept a 40V panel.
Is the MHPOWOS MH-SP-002 200W or 220W?
The title and model say 220W; some bullets say 200W. Treat 220W as the rating.
How heavy is the MHPOWOS 220W MH-SP-002?
One field says 17.8 lb and a bullet says 8.5 kg (about 18.7 lb).
What plug does the MHPOWOS MH-SP-002 use?
The listing does not name the connector or the included cable.
Is the MHPOWOS MH-SP-002 waterproof?
It is listed as IP67 waterproof and dustproof.
Featured in
See also
- mhpowos 100 watt bifacial portable review
- solupup 30w foldable solar charger review
- dabbsson dbs420s 420w foldable solar panel review
- mhpowos 400w bifacial portable solar panel review
- MHPOWOS CA-MH-SP-003 400W Foldable Solar Panel Review: Specs, Pros and Cons
- mhpowos 400w bifacial solar panel review
- sanpyl portable solar charging electronic review
