Power Products 4-Wire Low Oil Sensor for Predator 9500 Review (2026)
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The Power Products 4-Wire Low Oil Alert is a replacement oil level sensor for exactly two generators: the Predator 9500-watt inverter (Harbor Freight SKU 57080 and 59188) and the DuroMax XP9000iH 459cc dual fuel inverter. It is the part to buy if your generator shuts down or refuses to start with a full crankcase, or shows a low oil warning that will not clear, and the original sensor is the suspect. The listing calls it a direct replacement that meets OEM standards, and the package holds one sensor. It does not show the plug type, wire length, thread size or mounting, so compare it with the old sensor before ordering. As with any engine part bought online, nothing here comes from fitting it ourselves; the details are from the seller's listing.
What stands out
- 4-wire low oil alert sensor
- Named fits: Predator 9500 inverter (57080, 59188)
- Named fit: DuroMax XP9000iH 459cc dual fuel
- One sensor per package
Who it fits
Good fit for
Owners of a Predator 9500 inverter or DuroMax XP9000iH whose low oil shutdown trips with a full crankcase or whose sensor is damaged.
Who should skip it
Owners of any other generator, including other Predator or DuroMax models, unless they confirm the same 4-wire sensor fits.
Verdict: A narrow-fit replacement sensor for two generators; check the connector against your old part first.
Low oil sensor details and what they mean
4-wire design
Matches generators whose oil sensor uses a four-wire harness; two- and one-wire sensors are a different part.
Fits Predator 9500 inverter, SKU 57080 / 59188
Both Harbor Freight item numbers of the 9500W inverter are named.
Fits DuroMax XP9000iH 459cc dual fuel
The only DuroMax model the listing names.
About 6 x 1 x 0.5 in
The listed size; compare it with the sensor you remove.
What the Power Products sensor looks like
The part is a small silver sensor body with a four-wire lead, sold as a single piece. The listing gives a 6 x 1 x 0.5 inch size but no wire length, connector photo description, thread size, seal or O-ring, or warranty. Check how your old sensor mounts and whether a new seal is needed before you drain the oil.
When the Power Products sensor helps
Swap the sensor when a Predator 9500 or XP9000iH cuts out right after starting despite a correct oil level, or when its wiring is damaged. Drain or lower the oil as needed, unplug the four-wire harness, remove the old sensor, fit this one and reconnect. Before blaming the sensor, check the oil level on level ground, because a slight tilt can trip a good sensor. Choose this part if your generator is one of the two named models; choose the maker's own part through Harbor Freight or DuroMax if you want the factory number.
Low oil sensor points to check
Confirm these first.
Check before you buy
- Your unit is a Predator 9500 inverter 57080/59188 or DuroMax XP9000iH
- Your old oil sensor also has four wires
- The connector on your 459cc engine harness matches
- You have a seal or O-ring if your sensor uses one
The product at a glance
Power Products 4-Wire Low Oil Sensor
Best for: Predator 9500 and XP9000iH repairs
- Fuel Type
- Dual Fuel
- Dimensions
- 6 × 1 × 0.5 inches
View on Amazon: Power Products 4-Wire Low Oil Sensor Affiliate link
A 4-wire replacement low oil alert sensor for the Predator 9500W inverter (SKU 57080/59188) and the DuroMax XP9000iH 459cc dual fuel inverter, sold singly. The listing gives no connector, thread or warranty details.
Pros
- Names both Predator 9500 SKUs
- Also fits the DuroMax XP9000iH
- Single part, simple swap
Cons
- Only two generators named
- No connector or thread details
- No warranty term listed
Good fit if
- You own a Predator 9500 inverter
- Your XP9000iH low oil sensor failed
Skip if
- Your generator is not a Predator 9500 or XP9000iH
- Your old sensor is not 4-wire
Verdict: A narrow-fit replacement oil sensor.
Specifications side by side
| Spec | Power Products 4-Wire Low Oil Sensor |
|---|---|
| Fuel Type | Dual Fuel |
| Dimensions | 6 × 1 × 0.5 inches |
| Color | Silver |
| Model | Low Oil Alert 9500 |
Frequently asked questions
Which generators does the Power Products 4-wire low oil sensor fit?
The listing names the Predator 9500-watt inverter (SKU 57080 and 59188) and the DuroMax XP9000iH 459cc dual fuel inverter.
How many Power Products low oil sensors come in the package?
One 4-wire low oil alert sensor.
Does the Power Products sensor fix a generator that will not stay running?
Only if the original low oil sensor is faulty; check the oil level on flat ground first, as a tilted generator can trip a working sensor.
Does the Power Products low oil sensor list a warranty?
No warranty term appears in the listing; it says only that the sensor meets OEM standards.
See also
- anker solix c200 DC 192wh 60w solar panel review
- anker solix f3000 bp3000 expansion battery bundle review
- anker solix e10 6kwh smart inlet box bundle review
- best generators under 100
- best generators under 150
- Best Generators Under $200 in 2026: 9 Picks Ranked by Specs
- Best Generators Under $300: 9 Spec-Based Picks
- 8 Best Generators Under $500, Compared
- briidea c wire power adapter review
- dynatron k6 low power CPU review
