PurMars B1200A 1075Wh LiFePO4 Portable Power Station Review (2026): A Spec-Based Look
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The PurMars B1200A is a 1075Wh LiFePO4 station with 1,200W continuous AC (2,400W peak) on three outlets and ten outputs in all, including two 100W USB-C PD ports. What sets it apart in the 1kWh class is the cart-style build: a telescoping pull handle and wheels carry its 36.8 lb, so it rolls rather than lifts. It charges at up to 600W from the wall (full in about 1.8 hours) and takes 12-50V, 10A, 400W of solar. The trade-offs are a 2,000+ cycle rating, lower than many LFP rivals, and a 1,200W ceiling that rules out bigger kitchen appliances. The listing title does not name the brand; PurMars appears in the bullets and app. This review is based on the listing, not on hands-on use.
What stands out
- 1075Wh LiFePO4, 2,000+ cycles
- 1,200W AC, 2,400W peak, three outlets
- Two 100W USB-C PD ports among ten outputs
- Wheels and telescoping handle
Who it fits
Good fit for
Home-backup and farm or garden users who want a 1kWh station they can roll between rooms or out to a shed, running tools, lights and electronics.
Who should skip it
Anyone with 1,500W kitchen appliances, campers who need to carry the station over rough ground, and buyers who want a higher cycle rating.
Verdict: A practical rolling 1kWh station; check that your loads fit 1,200W.
B1200A figures explained
1075Wh LiFePO4
A fridge for a good part of a day, or a CPAP for several nights, depending on draw.
1,200W, 2,400W peak
Tools, fans and a small microwave; not a 1,500W kettle.
600W AC input, about 1.8 h
Full from the wall in under two hours.
Solar 12-50V, 10A, 400W
Keep the panels' combined open-circuit voltage under 50V.
2,000+ cycles
Years of weekly use; daily cycling wears it sooner than 4,000-cycle rivals.
36.8 lb on wheels
Rolls on its wheels with the pull handle.
B1200A outlets, inputs and cart build
Outputs: three AC outlets, two 18W USB-A, two 100W USB-C PD, two 12V/8A DC and one 12V/10A car socket. Inputs: an AC port (90-140V, up to 600W) and a DC port (12-50V, 10A, up to 400W) for solar or car charging. An LED light offers lighting, alarm and SOS modes and stays on until switched off. The case measures 16.2 x 11.4 x 12.3 inches and rides on wheels with a telescoping handle.
PurMars lists eight battery protections (over-charge, over-discharge, overload, imbalance, temperature, short circuit, over-voltage and over-current) and app control over Wi-Fi or Bluetooth. The listing does not state the AC wave type, a UPS function or the warranty length.
Rolling the B1200A to where you need it
PurMars asks for one full discharge and recharge on first use, since the battery can show a false reading after long storage. After that, the B1200A suits a home outage: roll it to the kitchen for the fridge, then to the bedroom for a fan and phones. In the garden or on a small farm, it runs a drill, a pump or lights where there is no outlet. The app shows status from another room. For multi-day use, up to 400W of panels adds charge on sunny days, and the 600W wall input gets it full in about 1.8 hours once power is back.
Checks before buying the PurMars B1200A
Run through these.
Check before you buy
- Your largest appliance stays under the B1200A's 1,200W
- Your panels stay inside the B1200A's 12-50V, 10A solar window
- You are fine with a 2,000+ cycle rating on the B1200A's LFP cells
- You will do the first full discharge PurMars asks for on the B1200A
The product at a glance
PurMars 1075Wh LiFePO4 Portable Power Station
Best for: Home and yard backup
- Running Wattage
- 1200W
- Surge Wattage
- 2400W
- Capacity
- 1075Wh
- Battery Chemistry
- LiFePO4
- Output Ports
- 10 outlets (3 AC, 4 USB, 3 DC)
- Application
- Camping, Home, Outdoor, Emergency, RV
View on Amazon: PurMars 1075Wh LiFePO4 Portable Power Station Affiliate link
PurMars B1200A: 1075Wh LiFePO4 rated 2,000+ cycles, 1,200W AC (2,400W peak) on three outlets plus two 100W USB-C and four 12V outputs, 600W AC charging in about 1.8 hours, 400W solar at 12-50V, wheels and a pull handle; wave type and warranty are not listed.
Pros
- Rolls on wheels with a pull handle
- Two 100W USB-C ports
- 1.8-hour AC recharge
Cons
- 1,200W limit
- 2,000+ cycle rating
Good fit if
- You want a 1kWh station you can roll around the house or yard
Skip if
- You need to run 1,500W appliances on the B1200A
Verdict: A rolling 1kWh station for home and yard.
Specifications side by side
| Spec | PurMars 1075Wh LiFePO4 Portable Power Station |
|---|---|
| Running Wattage | 1200W |
| Surge Wattage | 2400W |
| Capacity | 1075Wh |
| Battery Chemistry | LiFePO4 |
| Output Ports | 10 outlets (3 AC, 4 USB, 3 DC) |
| Wattage | 2400W |
| Application | Camping, Home, Outdoor, Emergency, RV |
| Dimensions | 16.2 × 11.4 × 12.3 inches |
| Weight | 36.8 pounds |
| Color | Black |
| Model | B1200A 1200W |
Frequently asked questions
How fast does the PurMars B1200A charge?
Full in about 1.8 hours from AC at up to 600W; solar takes up to 400W.
What solar panels work with the B1200A?
Panels within 12-50V and 10A, up to 400W.
How many outputs does the PurMars B1200A have?
Ten: three AC, two USB-C PD 100W, two USB-A 18W, two 12V/8A DC and one 12V/10A car socket.
Does the PurMars B1200A have wheels?
Yes, wheels and a telescoping pull handle.
Why drain the B1200A fully on first use?
PurMars says long storage can leave a false charge reading that one full cycle resets.
See also
- blavor ds s1600 built in 40w panel review
- ecovolt p5000 plus 500w solar panel review
- siokiuu 2500w inverter generator review
- best generators under 100
- best generators under 150
- Best Generators Under $200 in 2026: 9 Picks Ranked by Specs
- Best Generators Under $300: 9 Spec-Based Picks
- 8 Best Generators Under $500, Compared
- best portable power stations with LiFePO4 Battery
- marcy power cage dip station review
