As an Amazon Associate we earn from qualifying purchases. Affiliate disclosure

Renogy 28-Inch Adjustable Solar Panel Tilt Mount Brackets Review (2026): A Spec-Based Look

Latest update:

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

Renogy's 28 in adjustable mount is a bracket set for tilting one small Renogy panel on a flat surface such as an RV roof, a boat deck or a shed roof. Renogy lists fit for its panels under 100W, the 100W N-type and the 120W ShadowFlux; the title also names the 50W. The set uses four fixed L-brackets and two tilt L-brackets with foldable legs, held by stainless steel fasteners. The box includes M8 knob screws and wing nuts for tool-free angle changes, M6 bolts, washers and nuts to fix the panel frame, and six #10 self-drilling screws with plastic retaining rings for the roof. The listing gives a 28 in length, 3.5 lb weight and silver finish, but no tilt angle range and no wind or load rating. Our notes are drawn from Renogy's listing, not from mounting the set ourselves.

What stands out

  • Tilt legs for seasonal angle changes
  • Knob screws and wing nuts for tool-free adjusting
  • Self-drilling screws for the roof included
  • Listed fit for Renogy 50W, 100W N-type and 120W ShadowFlux

Who it fits

Good fit for

RV, van and boat owners with one small Renogy panel who park for days at a time and want to angle it toward the sun instead of lying flat.

Who should skip it

Owners of 200W+ panels or other brands' frames without a hole check, people who drive with the panel tilted, and anyone who needs a stated wind rating.

Verdict: A simple, complete tilt kit for one small Renogy panel; check hole spacing before using it with anything else.

Renogy 28 in tilt mount specs and box

28 in length

Sized for small panels such as the Renogy 100W N-type.

4 fixed + 2 tilt L-brackets

Tilt one edge up on two legs.

M8 knob screws and wing nuts

Change the angle by hand.

Six #10 self-drilling screws

For fixing to a metal or wood roof; seal holes yourself.

Stainless steel fasteners

Corrosion-resistant for boats and RVs.

3.5 lb, silver

No tilt range or wind rating listed.

What the Renogy bracket set contains

The set has four fixed L-brackets, two tilt L-brackets with foldable legs, six M8 plastic knob screws, six M8 wing nuts, washers and spring washers, four M6 x 16 mm hex bolts with lock washers, flat washers and nuts, six #10 x 1-1/4 in self-drilling cap screws and six plastic retaining rings. Renogy says the holes are pre-placed for quick assembly.

Mounting a small panel with the Renogy tilt set

Bolt the L-brackets to the panel frame with the M6 hardware, mark the roof, and drive the self-drilling screws, sealing each hole with a roof sealant suited to your RV or boat. When parked, loosen the knob screws, raise the tilt legs toward the sun and tighten again. Fold the legs flat before driving, since the listing gives no wind rating for the raised position.

Before buying the Renogy 28 in tilt mount

Check these points first.

Check before you buy

  • Your panel is a Renogy 50W, 100W N-type or 120W ShadowFlux
  • Your panel's frame holes line up with Renogy's 28 in brackets
  • You have roof sealant for the Renogy self-drilling screws
  • You will lower the Renogy tilt legs before driving

The product at a glance

Renogy 28in Adjustable Solar Panel Mount

Best for: Small RV and boat panels

Wattage
100W
Application
RV, Marine
Panel Type
Foldable
Cell Type
N-Type
Dimensions
28 × 1.97 × 0.98 inches
Weight
3.5 pounds

View on Amazon: Renogy 28in Adjustable Solar Panel Mount Affiliate link

A Renogy 28 in tilt bracket set with four fixed and two tilt L-brackets and full stainless hardware, listed for Renogy 50W, 100W N-type and 120W ShadowFlux panels.

Pros

  • Complete hardware in the box
  • Tool-free angle changes
  • Stainless fasteners for RVs and boats

Cons

  • No tilt angle range listed
  • No wind rating
  • Fit listed for small Renogy panels only

Good fit if

  • You park an RV or boat for days
  • You have one small Renogy panel

Skip if

  • Your panel is too big for a 28 in Renogy bracket
  • You want to drive with the Renogy legs up

Verdict: A complete tilt kit for one small Renogy panel.

Specifications side by side

Spec Renogy 28in Adjustable Solar Panel Mount
Wattage 100W
Application RV, Marine
Panel Type Foldable
Cell Type N-Type
Dimensions 28 × 1.97 × 0.98 inches
Weight 3.5 pounds
Size Adjustable Tilt Mount
Color Silver
Model 28in Adjustable Solar Panel

Frequently asked questions

Which panels fit the Renogy 28 in adjustable mount?

Renogy lists its panels under 100W, the 100W N-type and the 120W ShadowFlux; the title also mentions the 50W.

What tilt angle does the Renogy 28 in mount reach?

The listing gives no angle range, only that the tilt legs fold and lock with knob screws.

Does the Renogy 28 in tilt kit include roof screws?

Yes: six #10 x 1-1/4 in self-drilling cap screws with plastic retaining rings. Sealant is not listed.

Can I drive with the Renogy tilt legs raised?

Renogy gives no wind rating, so fold the legs down and lock them before driving.

How heavy is the Renogy 28 in bracket set?

3.5 lb for the full set of brackets and hardware.

See also