As an Amazon Associate we earn from qualifying purchases. Affiliate disclosure

Renogy 400W Bifacial N-Type Solar Panel 4-Pack (1600W) Review

Latest update:

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

Renogy's four-pack puts 1600W of bifacial N-type panels in one order: four 400W modules with 16BB cells rated at 25%, glass on both faces so reflected light adds output, and two independent power zones inside each panel. It is sized for a shed, a farm building, a cabin or a toy-hauler roof with real space, where four big modules replace eight 200W panels and half the MC4 junctions. The listing skips the electrical figures you need for wiring. This review is built from Renogy's listing and published specs; we have not installed the set.

What stands out

  • 1600W from four 400W bifacial modules
  • 16BB N-type cells at 25%, lower hot-spot risk
  • Two power zones per panel for partial shade
  • Up to 30% more yield over light ground or snow
  • Fewer branch connectors and MC4 joints

Who it fits

Good fit for

Shed, barn and cabin builders, and owners of large campers with flat roof space, who run a 24V or 48V battery bank through an MPPT controller or hybrid inverter.

Who should skip it

Anyone with a portable station, a curved or small RV roof, or a need for confirmed Voc and Isc before choosing a controller.

Verdict: A clean way to reach 1.6kW on a shed or cabin; get the voltage data before you size the controller.

The four-pack's numbers, explained

4 x 400W = 1600W

Roughly a mid-size off-grid cabin array, or a large boost for a 48V home battery.

N-type 16BB, 25%

Renogy also cites steadier output as panels heat up, which helps on hot metal roofs.

Rear-side gain to +30%

Counts on ground mounts over snow, sand, concrete or white gravel; little gain flush on a dark roof.

Dual power zones

A chimney or vent shadow on one half of a panel leaves the other half at full output.

67.8 x 44.7 x 1.4 in, 45.4 lb

Listed size and weight match one module, so expect about 180 lb across the four.

How the Renogy four-pack is built, and its gaps

These are large framed bifacial modules, the same 67.8 x 44.7 inch format Renogy uses in its six-panel set, and the model field here simply reads "4pcs 400W Solar Panels". Renogy explains the split-zone layout and the bifacial gain in detail but lists no Voc, Vmp or Isc, no connector or lead length, no IP or fire rating and no warranty. Its tax-credit bullet is marketing, not advice; check current IRS rules for your install.

Putting 1600W of bifacial panels to work

A common layout is two strings of two, or one string of four, into an MPPT controller with a wide input window; which one works depends on the Voc that Renogy does not list, so ask before buying the controller. Mounted on a tilt rack over gravel or a light-colored shed roof, the rear sides earn their keep, especially in snowy months. On an RV, four 67.8-inch modules need a long flat roof and solid rails, and the set's weight is a real load.

Checks for the Renogy 1600W four-pack

Plan the mounting and electronics first.

Check before you buy

  • Your roof or rack takes four 67.8 x 44.7 inch Renogy bifacial modules
  • Your controller or inverter is rated for a 1600W bifacial array
  • Renogy has sent the 400W bifacial module's Voc and Isc for string sizing
  • The four-pack will sit high enough over light ground for rear-side gain

The product at a glance

Renogy 400W Bifacial Solar Panel

Best for: Sheds, farms and cabins

Rated Power
400 W
Conversion Efficiency
25%
Panel Type
Bifacial
Cell Type
N-Type Monocrystalline
Busbar Count
16BB
Weight
45.4 pounds

View on Amazon: Renogy 400W Bifacial Solar Panel Affiliate link

Four 400W bifacial modules (1600W) with 25% N-type 16BB cells, two shade-tolerant zones per panel and up to 30% rear-side gain on reflective surfaces. Listed at 67.8 x 44.7 x 1.4 in and 45.4 lb, which matches a single module. No electrical, IP or warranty data.

Pros

  • 1600W in four modules
  • Split power zones
  • Bifacial gain on ground mounts

Cons

  • No Voc, Isc or warranty listed
  • Heavy, large modules

Good fit if

  • You are wiring a shed, barn or cabin array
  • Your rack stands over gravel, sand or snow

Skip if

  • You need a panel for a portable station
  • Your roof is curved or short

Verdict: Solid shed and cabin building blocks, pending the electrical specs.

Specifications side by side

Spec Renogy 400W Bifacial Solar Panel
Rated Power 400 W
Conversion Efficiency 25%
Panel Type Bifacial
Cell Type N-Type Monocrystalline
Busbar Count 16BB
Weight 45.4 pounds
Wattage 400W
Application Home, Off-Grid, Marine
Dimensions 44.7 × 1.4 × 67.8 inches
Color Black
Model 4pcs 400W Solar Panels

Frequently asked questions

How many watts is the Renogy bifacial four-pack?

1600W: four Renogy 400W bifacial N-type modules.

Why does each Renogy 400W bifacial module have two power zones?

So shade on one half of the module leaves the other half producing, instead of pulling the whole panel down.

What weight should I plan for the Renogy 1600W bifacial set?

The 45.4 lb listed reads as one module; four modules come to roughly 180 lb before rails and hardware.

Does the Renogy 1600W bifacial set include a controller?

No controller, cables or mounts are listed; the set is the four panels.

See also