Renogy RSP590DCT 590W Bifacial Solar Panel 6-Pack (3,540W) Review: Specs, Pros and Cons
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This Renogy set holds six RSP590DCT bifacial modules, 3,540W rated before any rear-side gain. Each panel uses A+ grade N-type 16BB cells and a transparent backsheet, so light reflected from gravel, snow or a pale roof reaches the back face; Renogy claims up to 30% more energy in the right conditions. The aluminum frames are rated for 2400Pa wind and 5400Pa snow loads, and the junction box is IP68. Our take: a good fit for a ground-mounted or raised 48V home, farm or shed array where six large modules are easier to rack than fifteen small ones. The drawbacks: the listing gives no Voc, Vmp or warranty term, and the 350 lb set weight (about 58 lb per panel) means two installers. Based on Renogy's listing; we have not mounted these panels.
What stands out
- Six 590W bifacial modules, 3,540W
- N-type 16BB cells, up to 25% efficiency
- 2400Pa wind and 5400Pa snow ratings
- IP68 junction box
Who it fits
Good fit for
Homeowners, farms and off-grid cabins building a 48V array on a ground mount or raised rack over light-colored ground, who want few large modules from a known brand.
Who should skip it
RV and van owners (each module is about 7.5 ft long), anyone feeding a portable power station, and buyers who need full electrical specs or a stated warranty before ordering.
Verdict: A capable 3.5kW bifacial set for fixed 48V systems; get the datasheet before designing strings.
Renogy RSP590DCT 6-pack specs in plain terms
6 x 590W, 3,540W rated
A mid-size home-backup or cabin array.
Bifacial, transparent backsheet
Up to 30% extra over reflective ground, per Renogy.
N-type 16BB, up to 25% efficiency
Fewer hot spots and less light-induced loss.
2400Pa wind, 5400Pa snow
Suits exposed sites and snowy winters.
About 89.7 x 44.6 in per panel
Plan rack spacing for 7.5 ft modules.
350 lb for the set
About 58 lb per module.
RSP590DCT frame and backsheet
Each RSP590DCT has a black corrosion-resistant aluminum frame around glass on the front and a transparent backsheet on the rear, which is what lets it collect reflected light. The junction box is IP68. Renogy's listing names no cable length, connector type, Voc, Vmp, Isc or warranty length; it also repeats a tax credit claim, and whether that credit applies to you depends on current IRS rules and your installation.
Installing six 590W bifacial panels
Bifacial gain needs space behind the panels: mount them on a ground rack or raised frame well above white gravel, sand, concrete or snow, rather than flush on a dark shingle roof. Wire them into a high-voltage MPPT controller or hybrid inverter on a 48V bank; with no voltages in the listing, ask Renogy for the datasheet before deciding how many go in each string. At about 58 lb and 7.5 ft long each, plan on two people and a calm day.
Before buying the Renogy 590W 6-pack
Work through these points.
Check before you buy
- You have a 48V inverter or MPPT controller for six RSP590DCT panels
- Your RSP590DCT site has room for 7.5 ft modules on a raised rack
- You will request the RSP590DCT datasheet for Voc and Vmp
- Two people are available to lift each 58 lb RSP590DCT
The product at a glance
Renogy 6PCS 590W Bifacial Solar Panel
Best for: 48V ground-mount arrays
- Rated Power
- 590 W
- Conversion Efficiency
- Up to 25%
- Panel Type
- Bifacial
- Cell Type
- N-Type monocrystalline
- Busbar Count
- 16BB
- IP Rating
- IP68
View on Amazon: Renogy 6PCS 590W Bifacial Solar Panel Affiliate link
Six Renogy RSP590DCT bifacial N-type 16BB panels, 3,540W rated, with a transparent backsheet, IP68 junction box and 2400Pa wind / 5400Pa snow ratings. About 89.7 x 44.6 in each; 350 lb for the set.
Pros
- Large bifacial modules mean fewer to mount
- N-type 16BB cells
- Wind and snow ratings listed
Cons
- No Voc, Vmp or warranty term
- About 58 lb per panel
- Bifacial gain needs raised mounting
Good fit if
- You are building a 48V ground-mount array
- You have light-colored ground under the rack
Skip if
- You need RSP590DCT-size modules to fit an RV roof
- You want full RSP590DCT electrical data up front
Verdict: A 3.5kW bifacial set for fixed home and farm arrays.
Specifications side by side
| Spec | Renogy 6PCS 590W Bifacial Solar Panel |
|---|---|
| Rated Power | 590 W |
| Conversion Efficiency | Up to 25% |
| Panel Type | Bifacial |
| Cell Type | N-Type monocrystalline |
| Busbar Count | 16BB |
| IP Rating | IP68 |
| Weight | 350 pounds |
| Application | Home, Off-Grid, Marine |
| Dimensions | 44.6 × 4.2 × 89.7 inches |
| Size | 6pcs |
| Color | Black |
| Model | RSP590DCT-144x6-US-DSV |
Frequently asked questions
How much power does the Renogy RSP590DCT 6-pack make?
3,540W rated across six 590W panels, plus whatever the rear face adds over reflective ground.
How heavy is the Renogy 590W bifacial set?
Renogy lists 350 lb for the six-panel set, about 58 lb per RSP590DCT.
Can the RSP590DCT panels charge a portable power station?
They are sized for 48V home systems; with no Voc or Vmp listed, check with Renogy before connecting one to a station input.
How strong is the Renogy RSP590DCT frame?
Renogy rates it for 2400Pa wind and 5400Pa snow loads.
Do Renogy RSP590DCT bifacial panels work on a roof?
They work, but flush on a dark roof the rear face sees little light, so most of the bifacial gain is lost.
Featured in
See also
- eco worthy ultra 12v 400w complete solar kit review
- eco worthy 780w solar kit 7 168kwh 3000w inverter review
- twelseavan 150w portable solar panel review
- renogy solar panels 50 watt review
- renogy shadowflux solar panel 120 review
- Renogy 200W Lightweight Foldable Solar Panel Review: Who It Fits and Who Should Skip It
- Renogy 400W Portable Solar Suitcase Review: Specs, Pros and Cons
- Renogy 100W Portable Foldable Solar Panel Review: Specs, Pros and Cons
- renogy bifacial solar panel 400w review
- arctwonder solar panel rooftop tent review
