Rvpozwer 1200W (6 x 200W) N-Type Solar Panel 6-Pack Review: Specs, Pros and Cons
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The Rvpozwer 1911-6 is six 200W framed panels sold as a 1,200W set for a cabin, shed, farm building or large RV roof. Each panel uses 18-busbar N-type cells rated at 25% and measures 52.8 x 26.4 x 1.18 in. The 115 lb figure covers all six: Rvpozwer's single 200W listing gives 19.2 lb, and six of those come to about 115 lb. Panels carry an IP68 rating, an electroplated aluminum frame, pre-drilled mounting holes and a 10-year warranty. The detail that shapes any install is Rvpozwer's own wiring limit: no more than three panels in series or three in parallel, so six panels end up as two strings of three or three pairs. The listing gives no Voc, Vmp or current, which a controller choice needs. All of this is drawn from Rvpozwer's listing, without hands-on testing.
What stands out
- Six 200W N-type 18BB panels, 25% cell efficiency
- About 19.2 lb per panel, 115 lb for the set
- IP68, 2400Pa wind and 5400Pa snow ratings
- Rvpozwer limit: 3 in series or 3 in parallel
Who it fits
Good fit for
Owners of a fixed off-grid system, such as a cabin, workshop or large trailer roof, who want 1,200W of matching panels in one order and will pair them with an MPPT controller sized for it.
Who should skip it
Portable power station users with a single solar input under 500W, and anyone who needs Voc and Imp before buying: Rvpozwer leaves them out.
Verdict: A straightforward bulk buy of matching 200W panels; get the electrical data from Rvpozwer before sizing the controller.
Rvpozwer 1911-6 set figures explained
6 x 200W N-type, 18BB
1,200W of rated panel; real output depends on tilt, heat and sun hours.
52.8 x 26.4 x 1.18 in each
About 9.7 sq ft per panel; six need roughly 58 sq ft plus gaps.
115 lb total
About 19.2 lb per panel, matching Rvpozwer's single 200W listing.
Rvpozwer string cap: three panels
Six panels mean two groups of three; plan the combiner and controller around that.
IP68; 2400Pa wind, 5400Pa snow
Rvpozwer's load and sealing claims for the framed modules.
1,000Wh per panel per day
Rvpozwer's estimate at 5-6 sun hours; treat it as a best case.
Frames, cells and mounting on the 1911-6
Each module has an electroplated aluminum frame with pre-drilled holes on the back, so standard Z-brackets, tilt mounts or rails bolt on. The cells are 18BB N-type, which Rvpozwer says resists aging better than 10BB/12BB cells. The listing names no connector or cable length; most framed panels of this type use MC4 leads, but confirm before ordering extensions. Rvpozwer also mentions a federal clean energy tax credit; whether it applies depends on the install, so check current IRS rules.
Planning a six-panel Rvpozwer array
Because Rvpozwer limits strings to three panels, a common layout is two series strings of three combined in parallel, or three parallel pairs for a 24V bank. Without Voc figures you cannot check the string voltage against a controller's limit, so ask Rvpozwer for the panel's Voc and Isc first. Rvpozwer also asks owners to inspect the panels every two weeks for leaves or droppings and to keep cable ratings above the array current.
Before ordering the Rvpozwer 1911-6
Run through these checks.
Check before you buy
- You have about 58 sq ft of roof or ground for six Rvpozwer panels
- You have Rvpozwer's Voc and Isc for the 1911-6 string plan
- Your MPPT controller handles 1,200W from the Rvpozwer set
- You can lift about 19 lb per Rvpozwer panel onto the roof
The product at a glance
Rvpozwer 1200W 200W Solar Panel 6-Pack
Best for: Cabin and shed arrays
- Rated Power
- 200W
- Conversion Efficiency
- 25%
- Cell Type
- N-Type Monocrystalline
- System Voltage
- 12V
- Busbar Count
- 18BB
- IP Rating
- IP68
View on Amazon: Rvpozwer 1200W 200W Solar Panel 6-Pack Affiliate link
Six 200W 18BB N-type framed panels (about 19.2 lb each, 115 lb total) with IP68 and a 10-year warranty; Rvpozwer limits strings to three panels and lists no Voc.
Pros
- Six matching panels in one order
- IP68 and 10-year warranty
- Pre-drilled frames
Cons
- No Voc, Vmp or current
- Three-panel string limit
Good fit if
- You are building a fixed 1,200W Rvpozwer array
- You run an MPPT controller sized for it
Skip if
- You charge one station from one input
- You need the 1911-6 electrical sheet up front
Verdict: A plain bulk set of 200W panels for fixed off-grid systems.
Specifications side by side
| Spec | Rvpozwer 1200W 200W Solar Panel 6-Pack |
|---|---|
| Rated Power | 200W |
| Conversion Efficiency | 25% |
| Cell Type | N-Type Monocrystalline |
| System Voltage | 12V |
| Busbar Count | 18BB |
| IP Rating | IP68 |
| Weight | 115 lbs |
| Wattage | 200W |
| Application | Camping, Home, RV, Off-Grid, Marine |
| Features | Solar Charging |
| Voltage | 12V, 24V |
| Dimensions | 26.4 × 1.18 × 52.8 inches |
| Color | Black |
| Model | 1911-6 |
Frequently asked questions
Is 115 lb the weight of one Rvpozwer 1911-6 panel?
No. It is the six-panel total; Rvpozwer's single 200W listing gives 19.2 lb per panel.
How should the six Rvpozwer 200W panels be wired?
Rvpozwer allows at most three in series or three in parallel, so plan two groups of three.
Does Rvpozwer list Voc for the 1911-6 panels?
No. The listing gives wattage and efficiency only; ask Rvpozwer before choosing a controller.
What warranty does the Rvpozwer 1200W set have?
Rvpozwer states a 10-year warranty.
Can the Rvpozwer 1911-6 set charge a portable power station?
One or two panels can, if the station's input takes them; all six suit a fixed system with its own controller.
