As an Amazon Associate we earn from qualifying purchases. Affiliate disclosure

SOLPERK AK-4 Adjustable Solar Panel Mount Review: Specs, Pros and Cons

Latest update:

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

The SOLPERK AK-4 is a compact tilt bracket for a single solar panel of 150W or less. Its 13.8-inch (35 cm) rail bolts to a wall, an RV or any flat surface, and the panel can be set flat or at 15, 30, 45 or 60 degrees. The bracket weighs 2.29 lb and ships with one screw set and a 12-month warranty. It is a good match for the small 12V maintainer panels and 100W modules that many power station owners leave outside: a shed wall, a balcony rail or a van roof. The catch is fit: your panel needs pre-drilled frame holes, and SOLPERK does not list the hole spacing or the bracket material. We wrote this from SOLPERK's listing and spec fields, without installing one.

What stands out

  • Five angle stops: 0, 15, 30, 45, 60 degrees
  • One panel up to 150W
  • 13.8-inch rail, 2.29 lb
  • 12-month warranty

Who it fits

Good fit for

Owners of one 20-150W framed panel who want it fixed to a wall, railing or roof at a chosen angle, and who change that angle only now and then.

Who should skip it

Anyone with a frameless or folding panel, a module over 150W, or a row of panels to mount.

Verdict: A small, simple bracket that does one job; check your panel's hole pattern before buying.

What the SOLPERK AK-4 figures tell you

Up to 150W, one panel

Covers 12V maintainers and most 100W rigid panels; not 200W modules.

0/15/30/45/60 degree stops

Repeatable seasonal settings instead of a free hinge.

13.8 in (35 cm) rail

Short enough for a balcony rail or the side of a shed.

2.29 lb

Light to hold up while you drive the screws.

Silver/gray finish

SOLPERK calls it waterproof and rustproof but gives no material or rating.

12-month warranty

Shorter than most panel warranties, typical for brackets.

SOLPERK AK-4 build and box contents

In the box: one bracket stand and one screw set. The spec fields list 13.8 x 3.5 x 1.2 inches folded and 2.29 lb. SOLPERK describes the brackets as heavy-duty and says they will not dent or bend, but it never names the metal, and "100% waterproof" on a bracket is marketing wording rather than a rating. The bracket bolts through holes in the panel frame, so a panel without a drilled frame will not fit.

Setting a panel's angle on the SOLPERK AK-4

Screw the base to the wall or roof, bolt the panel frame on, and pick a stop. A common rule is a steeper angle in winter and a flatter one in summer; with the AK-4 that means moving between, say, 45 and 15 degrees twice a year. At 60 degrees on a wall, a small 12V panel sheds snow and dust better, which helps a battery maintainer or a station that tops up from a shed panel through the winter.

Before you order the SOLPERK AK-4

Have your panel's size and frame holes at hand.

Check before you buy

  • Your panel is 150W or less and has pre-drilled frame holes
  • The SOLPERK AK-4's 13.8-inch rail suits your panel's frame width
  • You have a solid wall, rail or roof spot for the AK-4 base screws
  • One fixed angle per season is enough for you

The product at a glance

SOLPERK 13.8in Adjustable Solar Panel Mount

Best for: One small framed panel

Connector Type
Mount Bracket
Compatible Devices
1 pcs solar panel within 150W
Cable Length
13.8 inches
Capacity
2.29 pounds
Features
Kickstand
Dimensions
13.8 × 3.5 × 1.2 inches

View on Amazon: SOLPERK 13.8in Adjustable Solar Panel Mount Affiliate link

The SOLPERK AK-4 is a 13.8-inch tilt bracket for one framed panel up to 150W, with stops at 0, 15, 30, 45 and 60 degrees, a 2.29 lb weight and a 12-month warranty; bracket material and hole spacing are not listed.

Pros

  • Repeatable angle stops for seasonal changes
  • Small enough for walls and balcony rails
  • Screw set included

Cons

  • Needs a panel with a drilled frame
  • Material and hole spacing not given

Good fit if

  • You fix a 100W panel to a shed wall at a winter angle

Skip if

  • You need a mount for a 200W module

Verdict: A neat single-panel bracket for small framed modules.

Specifications side by side

Spec SOLPERK 13.8in Adjustable Solar Panel Mount
Connector Type Mount Bracket
Compatible Devices 1 pcs solar panel within 150W
Cable Length 13.8 inches
Capacity 2.29 pounds
Features Kickstand
Dimensions 13.8 × 3.5 × 1.2 inches
Weight 2.29 pounds
Size Mount Bracket
Color Silver/Gray
Model AK-4

Frequently asked questions

How many panels does the SOLPERK AK-4 hold?

One panel, rated up to 150W.

Which angles can the SOLPERK AK-4 lock at?

Flat (0), 15, 30, 45 and 60 degrees.

Does the SOLPERK AK-4 fit a folding panel?

Only if it has a rigid frame with drilled holes; fabric and flexible folders have nothing to bolt through.

What comes with the SOLPERK AK-4?

One bracket stand and one set of mounting screws.

What warranty does SOLPERK give on the AK-4 bracket?

12 months, plus the seller's technical support line.

See also