STAR SR-SP-200W-N-1 200W Bifacial Solar Panel Review: Who It Fits and Who Should Skip It
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The STAR SR-SP-200W-N-1 is a rigid 200W bifacial panel sold for both 12V and 24V battery systems, which makes it easy to fit into an RV, tiny house or cabin setup. Its half-cell, smart multi-busbar (SMBB) layout is meant to keep output going when part of the panel is shaded, and STAR claims up to 15% extra energy from light reaching the rear face. It lists a -0.26%/C temperature coefficient, a working range up to 65 C, and load ratings of 2400Pa wind and 5400Pa snow under a glass build. At 53.7 x 30.3 x 1.18 inches and 23 lb, one person can still handle it. The bullets describe the cells as HJT while the title says N-type; HJT cells are N-type, so this is not a conflict. Missing: Voc, Isc, connector type and warranty length. We based this on STAR's listing, not on installing the panel.
What stands out
- Rated for 12V and 24V systems
- Bifacial, up to 15% rear-side gain claimed
- Half-cell SMBB layout for partial shade
- -0.26%/C temperature coefficient
Who it fits
Good fit for
RV, cabin and shed owners with a 12V or 24V bank who can tilt the panel above a light surface, or who deal with partial shade from vents and trees.
Who should skip it
Anyone mounting flat on a dark roof (little rear gain), and buyers who want Voc and warranty terms before ordering.
Verdict: A flexible-voltage 200W bifacial that rewards a raised mount.
STAR SR-SP-200W-N-1 figures explained
200W bifacial
Rear-side light adds up to 15%, per STAR, when the panel is raised over a reflective surface.
12V/24V
Can charge either bank voltage through a suitable controller.
Half-cell SMBB
Shading one area costs less output than on a full-cell panel.
-0.26%/C
Loses less power in summer heat than many panels.
2400Pa wind / 5400Pa snow
Load ratings for roof or ground mounts.
53.7 x 30.3 x 1.18 in, 23 lb
A standard 200W footprint.
How the SR-SP-200W-N-1 is built
STAR uses glass encapsulation and A+ grade cells, screened for current to reduce mismatch losses by up to 2%, according to the listing. STAR describes an integrated design that needs no extra wiring or bracket assembly, but the listing does not say which connector or mounting hardware is included.
Getting the most from a bifacial 200W
Mount it on tilt legs or a ground rack over gravel, concrete or white membrane so the rear face sees reflected light; flat on a dark roof it behaves much like a standard panel. Choose the SR-SP-200W-N-1 over STAR's frameless Cleanedge 200W if you can raise it or have partial shade; choose the Cleanedge if the panel will lie flat on a dusty roof.
Before buying the STAR SR-SP-200W-N-1
Check these points.
Check before you buy
- Your SR-SP-200W-N-1 mount lets light reach the back
- Your controller suits a 12V or 24V SR-SP-200W-N-1 setup
- You can confirm the SR-SP-200W-N-1 connector with STAR
- Your roof fits 53.7 x 30.3 in for the SR-SP-200W-N-1
The product at a glance
STAR 200W N-Type Bifacial Solar Panel
Best for: Tilted roof and ground mounts
- Rated Power
- 200W
- Conversion Efficiency
- 25%
- Panel Type
- Bifacial
- Cell Type
- N-Type monocrystalline (HJT)
- System Voltage
- 12V, 24V
- Busbar Count
- SMBB
View on Amazon: STAR 200W N-Type Bifacial Solar Panel Affiliate link
STAR SR-SP-200W-N-1: 200W bifacial for 12V/24V, half-cell SMBB, HJT N-type cells, up to 15% rear gain claimed, -0.26%/C, 2400Pa/5400Pa, 53.7 x 30.3 x 1.18 in, 23 lb; no Voc or warranty listed.
Pros
- 12V or 24V use
- Shade-tolerant layout
- Low heat loss
Cons
- Rear gain needs a raised mount
- Connector not named
Good fit if
- You can tilt the STAR SR-SP-200W-N-1 above a light surface
Skip if
- Your STAR panel will be glued flat to a dark roof
Verdict: A versatile 200W bifacial for raised mounts.
Specifications side by side
| Spec | STAR 200W N-Type Bifacial Solar Panel |
|---|---|
| Rated Power | 200W |
| Conversion Efficiency | 25% |
| Panel Type | Bifacial |
| Cell Type | N-Type monocrystalline (HJT) |
| System Voltage | 12V, 24V |
| Busbar Count | SMBB |
| Weight | 23 lbs |
| Wattage | 200W |
| Application | Home, Off-Grid |
| Voltage | 12V, 24V |
| Dimensions | 53.7 × 30.3 × 1.18 inches |
| Size | 200W |
| Color | Black |
| Model | SR-SP-200W-N-1 |
Frequently asked questions
Does the STAR SR-SP-200W-N-1 work on 12V?
Yes, STAR sells it for 12V and 24V systems.
How much extra power does the STAR 200W bifacial make?
STAR claims up to 15% from the rear side, depending on the surface below.
How heavy is the STAR SR-SP-200W-N-1?
23 lb, at 53.7 x 30.3 x 1.18 inches.
Does the STAR SR-SP-200W-N-1 handle shade?
Its half-cell SMBB layout is designed to keep output going under partial shade.
Are HJT and N-type the same on the STAR SR-SP-200W-N-1?
HJT cells are a type of N-type cell, so the title and bullets agree.
Featured in
See also
- ecosonique uc 300 300w solar panel suitcase review
- wagnation uc 100 100w foldable solar panel review
- xilanseek 400w bifacial solar panel 2 pack review
- star cleanedge 400w frameless solar panel 2 pack review
- star 430 watt bifacial solar review
- STAR 860W Bifacial Solar Panel 2-Pack (2x430W) Review
- STAR 100W Frameless Solar Panel (SR-100W-10BB) Review: Specs, Pros and Cons
- star 990w bifacial n type solar review
- antarctic star 14000btu review
