As an Amazon Associate we earn from qualifying purchases. Affiliate disclosure

VEVOR 100W Monocrystalline Rigid Solar Panel Review: Who It Fits and Who Should Skip It

Latest update:

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

The VEVOR 100W framed panel is one of the cheaper ways to get a glass-and-aluminum 100W module for a 12V setup: a gate opener, shed lights, a trailer battery or a small cabin. It measures 35.2 x 22.8 x 1.2 in and weighs 11.1 lb, with cells rated at 23% or better under tempered glass, an anti-corrosion frame, an IP65 rating and VEVOR's -4°F to 149°F operating range. A built-in MC4 lead connects to a charge controller. The box holds only the panel: VEVOR says controller, battery, alligator clips and mounting brackets are all extra, and asks owners to fix the panel well against wind. VEVOR leaves out the 100W panel's Voc, current rating and warranty length. We drew on VEVOR's listing for this, not on our own use.

What stands out

  • 100W framed mono, 23%+
  • 35.2 x 22.8 x 1.2 in, 11.1 lb
  • Tempered glass, aluminum frame, IP65
  • MC4 lead; brackets and controller not included

Who it fits

Good fit for

Owners of small 12V systems, such as gate openers, shed lighting, trailer or boat batteries, who want a compact framed 100W panel and already have or will buy a controller and mount.

Who should skip it

Anyone wanting a ready-to-go kit with controller and clips, or a panel to carry to a campsite.

Verdict: A compact budget 100W framed panel; add a controller, brackets and the Voc from VEVOR.

VEVOR 100W rigid panel figures in plain terms

100W, 23%+ mono

Rated output for small 12V loads and battery charging.

35.2 x 22.8 x 1.2 in

Compact for 100W; fits a shed roof or trailer rack.

11.1 lb

Light enough for a pole mount or wall bracket.

Tempered glass, aluminum, IP65

Built for permanent outdoor mounting.

MC4 lead

Goes to a PWM or MPPT controller; not straight to a battery.

Panel only

Controller, battery, clips and brackets are bought separately.

How the VEVOR 100W framed panel is built

Tempered low-profile glass covers the mono cells, held in an anti-corrosion aluminum frame with a junction box and MC4 lead on the back. VEVOR points out that brackets are not included and that the panel must be secured so wind cannot take it. VEVOR also sells this panel as a four-pack.

Setting up the VEVOR 100W on a small system

Bolt it to a Z-bracket or tilt mount facing south, run the MC4 lead to a 10A controller, and connect the controller to the 12V battery. That covers a gate opener or a few shed lights comfortably. For a second panel later, parallel wiring keeps the voltage in 12V controller range; ask VEVOR for the Voc before trying series.

Before buying the VEVOR 100W framed panel

Check these points.

Check before you buy

  • You have a controller for the VEVOR 100W framed panel
  • You will buy brackets for the 35.2 in VEVOR frame
  • Your 12V load suits about 100W of VEVOR panel
  • You can get the VEVOR 100W Voc for series plans

The product at a glance

VEVOR 100W Monocrystalline Solar Panel

Best for: Small 12V fixed setups

Rated Power
100W
Conversion Efficiency
≥23%
Panel Type
Monocrystalline
IP Rating
IP65
Weight
11.1 pounds
Application
RV, Off-Grid, Car, Marine

View on Amazon: VEVOR 100W Monocrystalline Solar Panel Affiliate link

A compact 100W framed mono panel (35.2 x 22.8 in, 11.1 lb) with tempered glass, aluminum frame, IP65 and MC4 lead; panel only, no Voc listed.

Pros

  • Low price for a framed 100W
  • Compact and light
  • Glass and aluminum build

Cons

  • No Voc or warranty term
  • Brackets and controller extra

Good fit if

  • You power a gate opener or shed lights
  • You want a small framed VEVOR module

Skip if

  • You want a complete kit with controller
  • You need a portable VEVOR folder

Verdict: A budget framed 100W panel for small fixed 12V jobs.

Specifications side by side

Spec VEVOR 100W Monocrystalline Solar Panel
Rated Power 100W
Conversion Efficiency ≥23%
Panel Type Monocrystalline
IP Rating IP65
Weight 11.1 pounds
Wattage 100W
Application RV, Off-Grid, Car, Marine
Cell Type Monocrystalline
Output Ports MC4
Water Resistance Waterproof
Dimensions 35.2 × 22.8 × 1.2 inches
Size 100W
Color Black
Model 100W

Frequently asked questions

What size is the VEVOR 100W monocrystalline panel?

35.2 x 22.8 x 1.2 in, at 11.1 lb.

Does the VEVOR 100W framed panel include a controller?

No. VEVOR ships only the panel; controller, battery, clips and brackets are separate.

Is the VEVOR 100W rigid panel waterproof?

VEVOR rates it IP65 with a -4°F to 149°F range.

What connector does the VEVOR 100W panel use?

A built-in MC4 cable.

Is there a multi-pack of the VEVOR 100W framed panel?

Yes, VEVOR also lists it as a four-pack.

See also