As an Amazon Associate we earn from qualifying purchases. Affiliate disclosure

Anker SOLIX PS100 100W Bifacial Portable Solar Panel Review

Latest update:

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

The Anker SOLIX PS100 Bifacial (model AS310) is a 100W folding panel with N-type cells rated at 25% or better and a rear face that Anker says adds up to 10% on reflective ground such as snow, sand or concrete. It is light: Anker gives about 7 lb including the stand (6.28 lb in the spec field), and the spec fields list 40.6 x 23.6 x 0.67 in. It carries an IP68 rating, an aluminum frame and a 5-year warranty. In the box are two 8.2 ft solar cables and a 1.6 ft XT60i lead, so it plugs straight into Anker SOLIX stations and others with an XT60 input. Our view: a light, well-warrantied 100W panel for small and mid stations; Anker's 10% bifacial figure is realistic. The listing gives no voltage figures. We read Anker's listing and specs and did not use the PS100 ourselves.

What stands out

  • 100W, N-type cells at 25%+
  • Rear side adds up to 10%, per Anker
  • About 7 lb including the stand
  • IP68, aluminum frame, 5-year warranty
  • Two 8.2 ft cables plus a 1.6 ft XT60i lead

Who it fits

Good fit for

Owners of Anker SOLIX C-series and other stations with an XT60 solar input who want a light 100W panel that holds up in rain and mud.

Who should skip it

Owners of stations with an 8 mm or Anderson input who do not want to add an adapter, and buyers who need Voc and Vmp in writing.

Verdict: A light, rugged 100W bifacial panel with a sober gain claim and good warranty; easiest on XT60 stations.

PS100 Bifacial figures in plain terms

100W, 25%+ N-type cells

Anker says the cells lose less in high heat.

Up to 10% from the back

A modest, believable bifacial gain on bright ground.

About 7 lb with stand (6.28 lb field)

Anker calls it over 30% lighter than typical 100W panels.

40.6 x 23.6 x 0.67 in

From the spec fields; Anker does not say folded or open.

IP68, aluminum frame

Built for rain and mud; Anker cites a 10-year lifespan.

2 x 8.2 ft cables + 1.6 ft XT60i

Long runs to a station in the shade; XT60i plug included.

PS100 Bifacial build

Anker uses a reinforced aluminum frame and impact-resistant materials around the cells, and both faces generate. A stand is built in. The listing names the cables in the box but not their connector at the panel end, and says nothing about USB ports, so treat it as a station panel only.

Running the PS100 Bifacial

Set it on its stand facing the sun, use the 8.2 ft cables to keep the station in the shade, and finish with the XT60i lead. Open ground over sand, snow or concrete gives the back side some light; on grass the gain is small. 100W suits stations around 300-1000Wh: a 768Wh unit would need a full sunny day and then some, so pair two panels for faster refills if your station's input allows.

Before buying the Anker PS100 Bifacial

Check the fit.

Check before you buy

  • Your station has an XT60 solar input for the PS100 Bifacial lead
  • Your station accepts a single 100W panel like the PS100 Bifacial
  • You do not need USB ports on the PS100 Bifacial itself
  • You know whether your station needs an adapter beyond the PS100 Bifacial cables

The product at a glance

Anker SOLIX PS100 Bifacial Solar Panel

Best for: Small and mid XT60 stations

Rated Power
100W
Conversion Efficiency
25%+
Panel Type
Bifacial, foldable
Cell Type
N-type
IP Rating
IP68
Weight
7 lb

View on Amazon: Anker SOLIX PS100 Bifacial Solar Panel Affiliate link

Anker's SOLIX PS100 Bifacial (AS310) is a 100W N-type folder at about 7 lb with stand, IP68, 5-year warranty and an XT60i cable. Back side adds up to 10%.

Pros

  • Light for 100W
  • IP68 and 5-year warranty
  • Long cables and XT60i lead included

Cons

  • No voltage figures listed
  • No USB ports
  • Adapter needed for non-XT60 inputs

Good fit if

  • You own an Anker SOLIX or XT60-input station
  • You want a light, rugged 100W

Skip if

  • Your station uses an 8 mm or Anderson input and you want no adapter
  • You need USB charging on the PS100 Bifacial

Verdict: A light, rugged 100W bifacial folder that suits XT60 stations best.

Specifications side by side

Spec Anker SOLIX PS100 Bifacial Solar Panel
Rated Power 100W
Conversion Efficiency 25%+
Panel Type Bifacial, foldable
Cell Type N-type
IP Rating IP68
Weight 7 lb
Wattage 100W
Application Camping, Home, Outdoor, Emergency, RV
Dimensions 23.6 × 0.67 × 40.6 inches
Color Black
Model AS310

Frequently asked questions

How much does the Anker SOLIX PS100 Bifacial weigh?

About 7 lb with the stand according to Anker; the spec field says 6.28 lb.

How much extra power does the PS100 Bifacial back side add?

Anker says up to 10% on reflective or open ground.

What cables come with the Anker SOLIX PS100 Bifacial?

Two 8.2 ft solar cables and a 1.6 ft XT60i cable.

Is the Anker SOLIX PS100 Bifacial waterproof?

Anker rates the PS100 Bifacial IP68 against water and dust.

What warranty covers the Anker SOLIX PS100 Bifacial?

A 5-year warranty; Anker cites a 10-year lifespan.

See also