COMeap SOLAR-001 10AWG MC4 to XT60 Cable Review
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
COMeap's SOLAR-001 is a short adapter, not a long extension: 3.4 ft (1.04 m) of 10AWG tinned copper with MC4 connectors on the panel side and an XT60 plug on the station side. That makes it the link between an MC4 solar panel and stations whose solar port is XT60, such as the EcoFlow DELTA 2 and RIVER 2 lines and Anker SOLIX units the listing names. On paper it is well specified for its size: 30A rated current, 600V rated voltage, 105 °C heat resistance and IP68 on the MC4 connectors. The listing and its parameter bullet are our only source; we have not plugged one in.
What stands out
- 10AWG tinned copper, SPT-2
- 30A / 600V rating
- IP68 MC4 connectors
- 3.4 ft (1.04 m) including plugs
- 5.29 oz
Who it fits
Good fit for
Owners of EcoFlow DELTA/RIVER or Anker SOLIX stations with an XT60 solar input who already have MC4 panels and a separate extension to reach the sun.
Who should skip it
Anyone who needs distance: at 3.4 ft this only bridges the plug types. Owners of stations with 8mm, Anderson or DC 8020 inputs need a different adapter.
Verdict: A thick, well-rated MC4-to-XT60 adapter; pair it with an MC4 extension when the panels sit far from the station.
SOLAR-001 ratings and what they mean
10AWG wire
Thicker than the 12AWG and 14AWG common on adapters, so less loss at high current.
30A rated current, 600V
Far above what a portable panel set puts out; the station's own input limit is the real ceiling.
3.4 ft (1.04 m)
Long enough to reach from a panel's MC4 leads to a station on the ground, not to move the station indoors.
IP68 MC4 ends, UL94-V0
The panel-side joint is sealed against rain and dust; the XT60 end has no stated water rating.
105 °C heat resistance
The jacket tolerates a hot roof or summer ground.
What the COMeap adapter is made of
The cable is SPT-2 10AWG tinned copper with double-sealed MC4 connectors and an XT60 plug. The MC4 male side locks and releases by squeezing both sides with your fingers; no spanner is needed. COMeap lists a 4,000-cycle plug test. The listing does not say whether the XT60 is the standard or the high-current XT60i version, which matters only for stations that need the i-type sense pin.
Hooking MC4 panels to an XT60 station
Connect the panel's MC4 positive and negative leads to the matching SOLAR-001 connectors, then push the XT60 into the station's solar port. If the panels are far away, put an MC4 extension between panel and adapter, so the long run uses MC4 and the short run uses the 10AWG adapter. Pick the SOLAR-001 for a short, heavy link; pick COMeap's 10 ft SOLAR-002 if you want the adapter itself to add distance and can accept its thinner 12AWG wire.
Before buying the COMeap SOLAR-001
Check the station end first.
Check before you buy
- Your station's solar port is a plain XT60 (DELTA 2, RIVER 2, Anker 757 and others COMeap names)
- 3.4 ft of SOLAR-001 reaches from the panel leads, or you have an MC4 extension
- Your panels' combined current stays under the station's own input limit, not just the SOLAR-001's 30A
The product at a glance
COMeap 3.4ft 10AWG MC4 to XT60 Solar Cable
Best for: MC4 panels to XT60 stations
- Connector Type
- MC-4 to XT60
- Compatible Devices
- EcoFlow, Bluetti EB55, Anker SOLIX
- Cable Length
- 3.4ft (1.04m)
- Wire Gauge
- 10AWG
- Voltage
- 600V
- IP Rating
- IP68
View on Amazon: COMeap 3.4ft 10AWG MC4 to XT60 Solar Cable Affiliate link
3.4 ft 10AWG tinned copper MC4-to-XT60 adapter; 30A, 600V, IP68 MC4 ends, 105 °C jacket, 5.29 oz.
Pros
- 10AWG wire with a 30A rating
- Sealed IP68 MC4 connectors
Cons
- Only 3.4 ft long
- No rating for the XT60 end
Good fit if
- Your station takes solar on XT60
- You already own an MC4 extension
Skip if
- You need a long run in one cable
- Your station uses 8mm or Anderson input
Verdict: A short, well-rated plug-type bridge.
Specifications side by side
| Spec | COMeap 3.4ft 10AWG MC4 to XT60 Solar Cable |
|---|---|
| Connector Type | MC-4 to XT60 |
| Compatible Devices | EcoFlow, Bluetti EB55, Anker SOLIX |
| Cable Length | 3.4ft (1.04m) |
| Wire Gauge | 10AWG |
| Voltage | 600V |
| IP Rating | IP68 |
| Application | RV |
| Output Ports | MC4 |
| Dimensions | 8.07 × 5.71 × 0.59 inches |
| Weight | 5.29 ounces |
| Size | 3.4ft |
| Color | Black |
| Model | SOLAR-001 |
Frequently asked questions
Which stations does the COMeap SOLAR-001 name?
EcoFlow DELTA 2/Pro/Max/1300/2000 and RIVER Pro/600/Mini/RIVER 2, Bluetti EB55, Anker SOLIX F1200/F1500/F2000/F2600/F3800/C300/C800/C800 Plus/C1000 and the Anker 757.
How long is the COMeap SOLAR-001 cable?
3.4 ft (1.04 m), connectors included.
What current can the SOLAR-001 carry?
30A rated, at up to 600V.
Is the SOLAR-001 waterproof?
The MC4 connectors are rated IP68; the listing gives no rating for the XT60 end.
Featured in
See also
- mjpower 90w 19v universal power station charger review
- ecoflow smart home panel 2 review
- liubaiwuqustars 30a mc4 y branch connectors review
- best generators under 100
- best generators under 150
- Best Generators Under $200 in 2026: 9 Picks Ranked by Specs
- Best Generators Under $300: 9 Spec-Based Picks
- 8 Best Generators Under $500, Compared
- comeap 24 pin atx cable review
- allpowers 400w foldable solar panel review
