As an Amazon Associate we earn from qualifying purchases. Affiliate disclosure

LiuBaiWuQuStars 30A MC4 Y Branch Connectors (2 Pairs) Review

Latest update:

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

This four-piece set from LiuBaiWuQuStars is two pairs of MC4 Y branch connectors: one M/FF and one F/MM per pair. One pair joins the positive and negative leads of two solar panels in parallel, so two panels feed a single MC4 lead to the station or controller; the second pair lets you do the same on another pair of panels or keep a spare. The listing gives a 30A rating, DC 1500V, tinned copper cores and a fit for PV wire from 14AWG to 10AWG. The listing title carries no brand name; the seller brand is LiuBaiWuQuStars. Our notes come from the listing only.

What stands out

  • Two Y pairs: M/FF and F/MM
  • 30A, DC 1500V rating
  • Tinned copper cores with strain reliefs
  • Red and black housings tell male from female
  • Takes 14AWG-10AWG PV wire

Who it fits

Good fit for

Anyone wiring two matching panels in parallel to one MC4 input, such as two 100W or 200W folders feeding a portable station.

Who should skip it

Owners of panels that need series wiring for voltage (Y branches only do parallel), or of panels that end in 8mm or Anderson plugs.

Verdict: A cheap, well-rated parallel kit; check that parallel current stays inside your station's input limit.

What the Y branch ratings mean

M/FF + F/MM

The M/FF branch joins two female (positive-side) leads; the F/MM joins two male (negative-side) leads.

30A rated current

Two panels in parallel add their current; 30A covers most portable setups.

DC 1500V rated voltage

Far above any portable panel; voltage is not the limit here.

14AWG-10AWG cable fit

Matches the leads on most portable and rigid panels.

2.02 x 2 x 10.8 in package

Small enough to keep in a panel's carry bag.

How the LiuBaiWuQuStars set is built

Each Y has a molded junction with strain reliefs where the short leads meet, tinned copper inside, and housings in red and black so the two branch types are easy to tell apart. The listing claims UV and heat resistance and dust and water sealing but gives no IP rating and no lead length. No certification mark is named.

Wiring two panels in parallel

Plug the positive lead of each panel into the two ends of one branch and the negative leads into the other, then run the single positive and negative outputs to your MC4-to-station adapter. Parallel keeps the voltage of one panel and adds the current, so two 20V panels stay at about 20V. Choose these Y branches when your station has a low voltage window but room for more amps; choose series wiring instead when your station accepts a higher voltage and limits current.

Before buying the LiuBaiWuQuStars Y set

Do the current math first.

Check before you buy

  • Your two panels are the same model, or at least similar voltage
  • Their combined current stays under 30A and under your station's input limit
  • Your panels end in MC4 plugs that fit LiuBaiWuQuStars branches
  • You do not need an IP rating printed on the listing

The product at a glance

LiuBaiWuQuStars 30A MC4 Y Branch Connectors

Best for: Two-panel parallel wiring

Connector Type
MC4
Wire Gauge
14AWG-10AWG
Voltage
DC1500V
Application
RV
Dimensions
10.8 × 2.02 × 2 inches

View on Amazon: LiuBaiWuQuStars 30A MC4 Y Branch Connectors Affiliate link

Four MC4 Y branches (2 M/FF + 2 F/MM) for parallel wiring; 30A, DC 1500V, tinned copper, 14-10AWG wire fit.

Pros

  • Two full pairs in one pack
  • High 30A / 1500V rating

Cons

  • No IP rating or lead length listed
  • No brand name on the listing title

Good fit if

  • You join two matching MC4 panels
  • Your station accepts the combined current

Skip if

  • You need series wiring
  • Your panels use 8mm or Anderson leads

Verdict: A basic, well-rated parallel set for two-panel setups.

Specifications side by side

Spec LiuBaiWuQuStars 30A MC4 Y Branch Connectors
Connector Type MC4
Wire Gauge 14AWG-10AWG
Voltage DC1500V
Application RV
Output Ports MC4
Dimensions 10.8 × 2.02 × 2 inches
Size 2 pairs M/FF & F/MM
Color black+ red
Model Y Branch Connector

Frequently asked questions

How many LiuBaiWuQuStars connectors are in the box?

Four pieces: two M/FF branches and two F/MM branches, so two complete pairs.

Can the LiuBaiWuQuStars Y branches wire panels in series?

No. Y branches combine panels in parallel; series wiring needs no branch at all.

What current is the LiuBaiWuQuStars set rated for?

30A, at DC 1500V.

What wire size fits these LiuBaiWuQuStars branches?

PV cable from 14AWG to 10AWG.

See also