DONYOIE 15V Charger for Goal Zero Yeti and Sherpa Review
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
DONYOIE's QX72W150400D2 is a replacement wall charger for Goal Zero power stations and Sherpa packs, with a 15V output, a 100-240V input and the longest cord of the 15V bricks we have looked at: 8 ft (2.5 m). The compatibility list is broad, from the Yeti 150 (22004), Yeti 400 (23000), Sherpa 100AC (22050) and Sherpa 50 up to Yeti Lithium 1000, 1250, 1400 and 3000, which is where buyers should slow down. DONYOIE never prints the amp or watt figure (the model code points to 15V 4A) or the plug size, and it lists a 16V part (AK100WG-1600500W2) among the chargers it replaces. Our read is based on DONYOIE's listing only.
What stands out
- 15V output, 100-240V input
- 8 ft (2.5 m) cord
- UL report E482416
- Short, over-current, over-voltage and over-temperature protection
- 30-day refund, 1-year exchange
Who it fits
Good fit for
Owners of a Yeti 150, Yeti 400, 200X, 500X or Sherpa 100AC who lost the original 15V brick and want a long cord to reach a wall socket.
Who should skip it
Owners of larger Yeti Lithium units until the seller confirms the current and plug, and anyone who needs a printed wattage.
Verdict: A long-cord 15V replacement for small Goal Zero units; the big-Yeti claims and missing amp figure need a seller check.
DONYOIE QX72W150400D2 details
15V output
The voltage Goal Zero's small Yeti and Sherpa chargers use; amps are not stated.
8 ft / 2.5 m cord
Reaches from a floor outlet to a station on a shelf or bench.
100-240V, 50/60 Hz
Works on US and overseas mains with the right plug.
UL report E482416
A UL file number you can look up; the same ID appears on VIFOCUFY's 15V charger.
Replaces part numbers 98058, 98051, 98052, AK100WG-1600500W2
The last is a 16V part, so match it against your old brick's label.
Build and compatibility notes
DONYOIE lists short-circuit, over-current, over-voltage and over-temperature protection and says each unit is aging-tested. The spec fields list only the model code, with no size, weight or plug dimensions. The model code QX72W150400D2 and the UL report number are the same as on VIFOCUFY's 15V 4A charger, so the two are likely the same factory unit under different seller names.
Charging a Yeti 400 or Sherpa from the wall
Plug the DONYOIE brick into the station's 15V charging port and the wall, then check that the display shows input. A 60W-class brick fills a small Yeti 150 in a few hours but takes far longer on a 1000Wh-class unit. Choose the DONYOIE for a small Yeti or Sherpa where the 8 ft cord helps; for a Yeti Lithium 1000 or larger, use Goal Zero's own higher-watt charger or ask DONYOIE which current it supplies.
Before ordering the DONYOIE 15V charger
Compare it with your old brick's label.
Check before you buy
- Your Goal Zero unit's input label reads 15V, matching the DONYOIE
- The DONYOIE plug size fits your jack (ask the seller)
- The current your old brick listed is no higher than what DONYOIE confirms
- A 30-day refund and 1-year exchange from DONYOIE suit you
The product at a glance
DONYOIE 15V Goal Zero Yeti Replacement Charger
Best for: Small Yeti and Sherpa replacements
- Compatible Devices
- Goal Zero Yeti 150, 400, 200X, 500X
- Cable Length
- 8FT/2.5M
- Voltage
- 100-240V, 15V
View on Amazon: DONYOIE 15V Goal Zero Yeti Replacement Charger Affiliate link
15V replacement charger (model QX72W150400D2) for Goal Zero Yeti and Sherpa; 8 ft cord, 100-240V input, UL E482416; amps and plug size not listed.
Pros
- Long 8 ft cord
- UL report number given
Cons
- No amp or watt figure
- Plug size not stated
Good fit if
- You own a Yeti 150, 400 or Sherpa 100AC
- You want a long cord to the wall
Skip if
- You need a big-Yeti charger
- You need the wattage in writing
Verdict: A long-cord 15V brick for small Goal Zero units.
Specifications side by side
| Spec | DONYOIE 15V Goal Zero Yeti Replacement Charger |
|---|---|
| Compatible Devices | Goal Zero Yeti 150, 400, 200X, 500X |
| Cable Length | 8FT/2.5M |
| Voltage | 100-240V, 15V |
| Model | QX72W150400D2 |
Frequently asked questions
Which Goal Zero units does the DONYOIE charger list?
Yeti 150, 400, 200X, 500X, Sherpa 50 and 100AC, plus Yeti 1000, 1250 and Yeti Lithium 400, 1000, 1250, 1400 and 3000.
How many watts is the DONYOIE QX72W150400D2?
The listing gives only 15V. The model code suggests 15V 4A (60W); confirm with the seller.
How long is the DONYOIE charger cord?
8 ft (2.5 m).
Is the DONYOIE Goal Zero charger UL certified?
DONYOIE gives UL report reference E482416.
See also
- vifocufy 15v 4a 60w charger goal zero yeti review
- anker solix smart inlet box e10 review
- hoeine 10ft mc4 to 8mm solar adapter cable review
- best generators under 100
- best generators under 150
- Best Generators Under $200 in 2026: 9 Picks Ranked by Specs
- Best Generators Under $300: 9 Spec-Based Picks
- 8 Best Generators Under $500, Compared
- goal zero yeti home integration kit review
- tzrong roomba charger review
