Hoeine 10 ft MC4 to 8mm Solar Adapter Cable Review
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
Hoeine's SC-004A is a 10 ft cable that takes MC4 solar leads in and puts out an 8mm male plug, the round solar input used on Jackery Explorer models such as the 160, 240, 500 and 1000 and on some BLUETTI, Goal Zero and Anker units. It turns an MC4 panel into one those stations can use and adds 10 ft of distance at the same time. Hoeine rates it at up to 20A with a 300V test voltage and a -15°C to 80°C range, and lists the output as DC7909/DC8020. The gauge is given as 12AWG+14AWG without saying which part is which. Our notes come from Hoeine's listing.
What stands out
- MC4 in, 8mm (DC7909/DC8020) male out
- 10 ft, 14.4 oz
- Up to 20A, 300V test voltage
- Sealed MC4 connectors
- Tinned copper, PVC jacket
Who it fits
Good fit for
Owners of an older Jackery Explorer or another 8mm-input station who want to use an MC4 panel from another brand and keep the station a few steps from the sun.
Who should skip it
Owners of stations with XT60 or Anderson inputs, and anyone who needs the station more than 10 ft from the panels in one cable.
Verdict: A handy 10 ft MC4-to-8mm adapter for 8mm stations; check the plug type of your exact model first.
Hoeine SC-004A ratings explained
10 ft length
Puts the station in shade or just inside a door while panels stay in sun.
12AWG + 14AWG
Hoeine lists both gauges; likely one section of each, but it does not say.
Rated current ≤20A
More than most portable panels deliver into an 8mm port.
Output DC7909 / DC8020
7909 is the classic 8mm plug; Jackery's newer DC8020 is a different port, so confirm which yours takes.
-15°C to 80°C
Fine for summer roofs and cold mornings.
How the Hoeine cable is put together
The orange cable uses tinned copper conductors in a PVC jacket with sealed MC4 connectors on the panel end and a molded 8mm plug on the station end. The package holds a single 10 ft cable; the listing does not mention a separate DC8020 adapter, so if your Jackery has the newer 8020 port, ask whether the plug fits before ordering. A 20 ft version, SC-004B, is sold separately.
Running an MC4 panel into an 8mm station
Connect the panel's MC4 positive and negative leads to the Hoeine MC4 ends, run the cable to the station, and plug the 8mm end into the solar input; the station's display should show solar watts within a few seconds. Keep within the station's 8mm voltage and current limits; an 8mm port on a small Jackery takes far less than the cable's 20A. Choose the 10 ft SC-004A when the panel and station sit close; choose the 20 ft SC-004B for more distance.
Before buying the Hoeine SC-004A
Match the station end.
Check before you buy
- Your station's solar input is a 7909 8mm port, or Hoeine confirms its DC8020 fit
- Your panel's open-circuit voltage is within the station's 8mm input range
- 10 ft of Hoeine cable is enough distance for your setup
The product at a glance
Hoeine 10FT MC4 to DC Adapter
Best for: MC4 panels to 8mm stations
- Connector Type
- MC4 to DC 8mm, DC7909/DC8020
- Compatible Devices
- Jackery, BLUETTI, Goal Zero Yeti, Anker
- Cable Length
- 10FT
- Wire Gauge
- 12AWG+14AWG
- Voltage
- 300V DC
- Application
- Camping, Emergency, RV
View on Amazon: Hoeine 10FT MC4 to DC Adapter Affiliate link
10 ft MC4-to-8mm (DC7909/DC8020) solar cable; 12AWG+14AWG, ≤20A, 300V test, -15 to 80°C, 14.4 oz.
Pros
- Converts and extends in one cable
- 20A rating above most 8mm inputs
Cons
- Gauge split not explained
- DC8020 fit not spelled out
Good fit if
- Your station has an 8mm 7909 solar port
- Your panel uses MC4 leads
Skip if
- Your station takes XT60 or Anderson
- You need more than 10 ft
Verdict: A practical MC4-to-8mm link for older Jackery-style inputs.
Specifications side by side
| Spec | Hoeine 10FT MC4 to DC Adapter |
|---|---|
| Connector Type | MC4 to DC 8mm, DC7909/DC8020 |
| Compatible Devices | Jackery, BLUETTI, Goal Zero Yeti, Anker |
| Cable Length | 10FT |
| Wire Gauge | 12AWG+14AWG |
| Voltage | 300V DC |
| Application | Camping, Emergency, RV |
| Output Ports | MC4 |
| Weight | 14.4 ounces |
| Size | 10FT |
| Color | Orange |
| Model | SC-004A |
Frequently asked questions
Which stations does the Hoeine SC-004A name?
Jackery Explorer 160, 240, 500 and 1000, plus BLUETTI, Goal Zero Yeti and Anker stations with an 8mm input.
What current is the Hoeine 10 ft cable rated for?
Up to 20A, with a 300V test voltage.
What gauge is the Hoeine SC-004A?
The listing says 12AWG+14AWG without naming which section uses which.
How heavy is the Hoeine SC-004A?
14.4 oz.
Featured in
See also
- dzdqdr 15v 60w charger goal zero yeti review
- btqsol mc4 solar y branch connector pair review
- aeternasol 45 inch solar panel tilt mount 2 sets review
- best generators under 100
- best generators under 150
- Best Generators Under $200 in 2026: 9 Picks Ranked by Specs
- Best Generators Under $300: 9 Spec-Based Picks
- 8 Best Generators Under $500, Compared
- jelens 10ft trampoline review
- rgeek 1106 DC to DC review
