Anker SOLIX Smart Inlet Box for E10 Review
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The Anker SOLIX Smart Inlet Box connects one specific battery system, the Anker SOLIX E10, to a home's electrical panel. It is the manual route to whole-home backup: when the grid fails you flip its switch and the E10 feeds the whole panel, with no limit on which circuits run, though the E10's own output still caps the total load. Day to day, three CT clamps let the E10 store spare rooftop solar or off-peak grid power and spend it at peak rates. The box is NEMA 3R rated for outdoor mounting and works from -4°F to 131°F. All of this comes from Anker's listing; we have not installed it.
What stands out
- Made for the Anker SOLIX E10
- Manual switch, whole-panel backup
- NEMA 3R, -4°F to 131°F
- 3 CT clamps for solar and TOU savings
- Storm Guard pre-charges before severe weather
Who it fits
Good fit for
Anker SOLIX E10 owners who want the whole panel backed up and can live with flipping a switch during an outage.
Who should skip it
Owners of other stations, including Anker's F3800 and F3000, and anyone who wants the house to switch over with nobody home.
Verdict: A tidy, weatherproof way to wire an E10 into the house; buy it as part of an E10 system.
Smart Inlet Box features in plain terms
Manual switch-over
You flip the switch in an outage; no automatic transfer is claimed.
No circuit limits
Every breaker can run on backup, so you must keep loads under the E10's output yourself.
3 CT clamps
Measure household and rooftop solar flow so Self-Consumption and TOU modes can work.
NEMA 3R, -4°F to 131°F
Can hang outside without a shelter in rain, snow and dust.
16.5 x 11 x 5.2 in, 14.3 lb
About the size of a small breaker box.
What comes in the Smart Inlet Box kit
Anker ships the box, a pre-wired ON-Grid cable, a Backup Power cable, three CT clamps and a quick-start guide. Quick-connect ports join it to the E10, so the station side needs no wiring by hand, but the panel side is still electrical work: Anker offers videos, live support and pre-screened licensed electricians. The spec field repeats the E10's model code A17E1 instead of the box's own.
Day-to-day savings and outage use
With the CTs on the main feed and any rooftop solar, Self-Consumption mode stores surplus solar in the E10 and TOU mode charges at off-peak rates and discharges at peak, which is where Anker's up-to-80% bill claim comes from; your result depends on your tariff and solar size. Storm Guard watches weather alerts and tops the E10 up before a storm. Choose the Smart Inlet Box for whole-panel backup at lower cost; choose an automatic transfer setup if outages happen while the house is empty.
Before buying the Anker SOLIX Smart Inlet Box
Confirm the system around it.
Check before you buy
- You own or are buying an Anker SOLIX E10 to pair with the Smart Inlet Box
- A licensed electrician will connect the Smart Inlet Box to your panel
- Someone is home to flip the Smart Inlet Box switch during an outage
- Your utility tariff has peak and off-peak rates if savings matter to you
The product at a glance
Anker SOLIX Smart Inlet Box
Best for: Anker SOLIX E10 home backup
- Compatible Devices
- Anker SOLIX E10
- IP Rating
- NEMA 3R
- Application
- Home
- Dimensions
- 16.5 × 5.2 × 11 inches
- Weight
- 14.3 pounds
View on Amazon: Anker SOLIX Smart Inlet Box Affiliate link
Home connection box for the Anker SOLIX E10: manual whole-panel backup, 3 CTs for solar and TOU modes, Storm Guard, NEMA 3R, 14.3 lb.
Pros
- Whole panel on backup, no circuit picking
- Outdoor-rated NEMA 3R box
Cons
- E10 only
- Manual switch-over
Good fit if
- You own an Anker SOLIX E10
- You want TOU and solar savings
Skip if
- You run a different station
- You need automatic switch-over
Verdict: The E10's link to the house panel.
Specifications side by side
| Spec | Anker SOLIX Smart Inlet Box |
|---|---|
| Compatible Devices | Anker SOLIX E10 |
| IP Rating | NEMA 3R |
| Application | Home |
| Dimensions | 16.5 × 5.2 × 11 inches |
| Weight | 14.3 pounds |
| Color | Silver |
| Model | A17E1 |
Frequently asked questions
Does the Anker Smart Inlet Box work with the F3800?
The listing names only the Anker SOLIX E10.
Is the Anker SOLIX Smart Inlet Box automatic?
No. Anker calls it manual backup: you flip the switch during an outage.
Can the Anker Smart Inlet Box be mounted outside?
Yes. It is rated NEMA 3R and works from -4°F to 131°F.
What is in the Anker Smart Inlet Box package?
The box, an ON-Grid cable, a Backup Power cable, three CTs and a quick-start guide.
Featured in
- 4 Best Power Station Accessories for Home Backup, Compared
- Anker SOLIX Power Station Accessories: 3 Picks Ranked by Specs
- Best Generators Under $10000 in 2026: 5 Picks Ranked by Specs
- 8 Best Generators Under $5000, Compared
- Best Anker SOLIX Generators: 5 Models Compared
- 7 Best Generators Under $7500, Compared
