EYONGPV 400W HPBC Foldable Solar Panel (EYF400) Review
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The EYONGPV EYF400-36BC6 is a 400W book-style folding panel built on HPBC back-contact cells that EYONGPV rates at up to 26% efficiency. Folded it is about 24 x 23.6 x 2.36 inches and 20.4 lb, with handles and adjustable kickstands. Output comes through a 30A Anderson connector on a 4.5 m (about 15 ft) cable, which suits Anderson-input power stations and 12V systems; other stations need an adapter, and the listing names none in the box. The sheet also skips Voc, Vmp and current, the figures you need to match a station's input. This write-up is based on EYONGPV's listing; we did not test the panel.
What stands out
- 400W of HPBC back-contact cells, up to 26%
- Book-style fold, about 24 x 23.6 in closed
- 30A Anderson output on a 4.5 m cable
- ETFE and EVA lamination, IP65
- Built-in handles and adjustable kickstands
Who it fits
Good fit for
Owners of 1kWh-plus power stations or RV 12V systems with an Anderson input who want 400W in one folding unit and a long lead so the station can stay in the shade.
Who should skip it
Stations with XT60, DC7909 or 8mm inputs only (no adapter is listed), anyone who must check Voc against a station's limit before buying, and hikers (20.4 lb is car-camping weight).
Verdict: A compact 400W folder with a useful long Anderson lead; the missing voltage figures are the main risk.
EYF400 figures explained
400W HPBC cells, up to 26%
Back-contact cells put the wiring behind the cell, leaving more surface for light.
About 24 x 23.6 x 2.36 in folded
Close to square when closed; fits behind a seat or in a trunk.
20.4 lb
Fine from car to campsite, heavy to carry far.
30A Anderson, 4.5 m cable
About 15 ft of reach; Anderson suits many stations and 12V setups.
IP65, ETFE + EVA
Handles rain spray and dust; pack it away dry.
Voc / Vmp / Isc
Not listed; check them with EYONGPV against your station's solar input.
Build of the EYONGPV 400W
The EYF400 folds like a book rather than an accordion, so it opens in a few moves and closes into a thick square with handles on the edge. The cells sit under ETFE with EVA lamination on both layers for UV and scratch resistance, and integrated kickstands let you tilt it toward the sun. EYONGPV says it is compatible with various connectors for RVs, generators and solar batteries, yet the only output described is the 30A Anderson plug, and no adapter set is listed.
Setting up the EYF400 at camp
Unfold it on flat ground, set the kickstands, and run the 4.5 m cable to the station so the station can sit in shade or inside the tent. Re-aim the panel every couple of hours for the best output. A 400W panel can make a real dent in a 1-2kWh station on a sunny day; on a 12V RV battery, you will need a charge controller between panel and battery. If your station uses XT60 or DC7909, buy an Anderson adapter before the trip.
EYONGPV 400W checks
Connector and voltage decide whether it works with your gear.
Check before you buy
- Your station or controller takes the EYF400's 30A Anderson plug, or you have an adapter
- EYONGPV confirms the EYF400's Voc fits your station's input range
- Your station can accept 400W of solar from the EYF400
- You can carry a 20.4 lb EYF400 from the car
- IP65 suits how you will leave the EYF400 outside
The product at a glance
EYONGPV 400W Foldable Solar Panel
Best for: Anderson-input stations
- Rated Power
- 400W
- Conversion Efficiency
- 26%
- Panel Type
- Foldable
- Cell Type
- HPBC Monocrystalline
- System Voltage
- 12V
- IP Rating
- IP65
View on Amazon: EYONGPV 400W Foldable Solar Panel Affiliate link
A 400W book-fold panel with HPBC cells rated up to 26%, ETFE/EVA lamination and IP65. About 24 x 23.6 x 2.36 in folded and 20.4 lb, with handles and kickstands. Output is a 30A Anderson plug on a 4.5 m cable; no adapters or Voc/Vmp figures are listed.
Pros
- 400W in a compact fold
- Long 4.5 m output cable
- HPBC cells up to 26%
- Kickstands and handles
Cons
- No Voc, Vmp or Isc
- Anderson only, no adapters listed
- 20.4 lb
Good fit if
- Your station has an Anderson input for the EYF400
- You want the EYF400 far from the station in the sun
Skip if
- Your station needs XT60 or DC7909 and you lack an adapter for the EYF400
- You must know the EYF400's Voc before buying
Verdict: Strong 400W folder; connector and voltage need checking.
Specifications side by side
| Spec | EYONGPV 400W Foldable Solar Panel |
|---|---|
| Rated Power | 400W |
| Conversion Efficiency | 26% |
| Panel Type | Foldable |
| Cell Type | HPBC Monocrystalline |
| System Voltage | 12V |
| IP Rating | IP65 |
| Weight | 20.4 lbs |
| Wattage | 400W |
| Application | Emergency, RV, Off-Grid |
| Water Resistance | Waterproof |
| Dimensions | 24 × 23.6 × 2.36 inches |
| Size | 400W Solar panel |
| Color | 400 Watts |
| Model | EYF400-36BC6 |
Frequently asked questions
What connector does the EYONGPV EYF400 use?
A 30A Anderson output on a 4.5 m cable.
Does the EYONGPV 400W come with adapters?
The listing describes only the Anderson output and does not list adapters in the box.
How efficient are the EYF400's HPBC cells?
EYONGPV rates them at up to 26%.
How heavy is the EYONGPV 400W panel?
20.4 lb, folding to about 24 x 23.6 x 2.36 inches.
Can the EYF400 charge a 12V RV battery?
EYONGPV lists 12V systems; use a solar charge controller between the panel and battery.
See also
- solarapex sp rwfu 200w flexible solar panel review
- geyoto s200 200w bifacial folding solar panel review
- etnalsolar 400w n type solar panel 2 pack review
- best generators under 100
- best generators under 150
- Best Generators Under $200 in 2026: 9 Picks Ranked by Specs
- Best Generators Under $300: 9 Spec-Based Picks
- 8 Best Generators Under $500, Compared
- ctolity 400w foldable solar panel review
- arctwonder solar panel rooftop tent review
