KINGHARDCASE Hard Case for Jackery Explorer 300 and 300 Plus Review (2026): A Spec-Based Look
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The KINGHARDCASE 1-KHC-14120006 is a hard shell carrying case cut to fit one station family: the Jackery Explorer 300 and Explorer 300 Plus. Precision-cut foam holds the station in place, and separate compartments take cables, adapters and the manual. A reinforced handle and an adjustable shoulder strap cover carrying. KINGHARDCASE says the shell handles rain, snow, mud, dust and cold, and the title calls it waterproof and drop resistant, but no IP rating or drop height is given. The case itself weighs 5.07 lb, a real addition to a small station. The size is listed two ways: 15.55 x 12.99 x 8.11 in in the bullets and 12 x 7 x 14.5 in in the spec field, so check the bullet figure against your storage space. This is a reading of KINGHARDCASE's listing; we have not used the case.
What stands out
- Foam cut for Explorer 300 and 300 Plus
- Hard shell rated for rain, mud and dust
- Handle plus adjustable shoulder strap
- Compartments for cables and adapters
Who it fits
Good fit for
Jackery Explorer 300 or 300 Plus owners who carry the station in a truck bed, boat, RV storage bay or job-site trailer and want it protected and organized.
Who should skip it
Owners of any other Jackery size, people who want a light soft bag, and anyone who needs to run the station while it sits inside the case.
Verdict: A protective case for Explorer 300-size owners who move their station a lot; it adds weight and does not suit other models.
KINGHARDCASE case specs and fit
Fits Jackery Explorer 300 / 300 Plus
Foam is cut for these two; other models are not listed.
Hard shell
Rain, snow, mud, dust and cold per the listing; no IP rating.
5.07 lb
Adds noticeable weight to a small station.
15.55 x 12.99 x 8.11 in
Bullet figure; the spec field lists 12 x 7 x 14.5 in.
Handle and shoulder strap
Two ways to carry.
Accessory compartments
Cables, adapters and manual stay with the station.
Shell, foam and storage in the KINGHARDCASE
The case is a black hard shell with a reinforced handle and an adjustable shoulder strap. Inside, precision-cut foam wraps the Explorer 300 or 300 Plus to stop it shifting, and dedicated compartments keep the charging cable, car adapter and other small parts visible. The listing does not mention latches, a pressure valve or a lock point.
Moving an Explorer 300 in the KINGHARDCASE
Pack the station into the foam, drop the AC charger and car cable into the compartments, and the case can ride in a truck bed or boat locker without the station sliding around. Use the shoulder strap on a walk to a campsite and the handle for short lifts. Take the station out before running it, since the listing says nothing about ventilation or cable pass-throughs while closed.
Before buying the KINGHARDCASE Jackery case
Check these points first.
Check before you buy
- You own a Jackery Explorer 300 or 300 Plus for this KINGHARDCASE foam
- 5.07 lb of KINGHARDCASE shell is fine on top of the station
- Your storage space fits a 15.55 x 12.99 x 8.11 in case
- You will take the Explorer 300 out of the case to run it
The product at a glance
Kinghardcase Hard Case for Jackery Explorer 300
Best for: Explorer 300 transport
- Compatible Model
- Jackery Explorer 300/300 Plus
- Water Resistance
- Waterproof
- Dimensions
- 12 × 7 × 14.5 inches
- Weight
- 5.07 pounds
View on Amazon: Kinghardcase Hard Case for Jackery Explorer 300 Affiliate link
A KINGHARDCASE hard shell case with cut foam for the Jackery Explorer 300 and 300 Plus, accessory compartments, a handle and a shoulder strap, weighing 5.07 lb.
Pros
- Custom foam for Explorer 300 / 300 Plus
- Weather-resistant hard shell
- Room for cables and adapters
Cons
- 5.07 lb adds bulk
- No IP rating or drop height
- Two different sizes listed
Good fit if
- You haul an Explorer 300 in a truck or boat
- You want cables stored with the station
Skip if
- You own a non-300 Jackery
- You want a light soft bag rather than a KINGHARDCASE shell
Verdict: Solid protection for Explorer 300-size stations.
Specifications side by side
| Spec | Kinghardcase Hard Case for Jackery Explorer 300 |
|---|---|
| Compatible Model | Jackery Explorer 300/300 Plus |
| Water Resistance | Waterproof |
| Dimensions | 12 × 7 × 14.5 inches |
| Weight | 5.07 pounds |
| Color | BLACK |
| Model | 1-KHC-14120006 |
Frequently asked questions
Which Jackery stations fit the KINGHARDCASE 1-KHC-14120006?
The Jackery Explorer 300 and Explorer 300 Plus; no other models are named.
Is the KINGHARDCASE Jackery case waterproof?
The title says waterproof and the listing says it handles rain, snow and mud, but there is no IP rating, so do not submerge it.
How heavy is the KINGHARDCASE case for the Explorer 300?
5.07 lb without the station inside.
Can I use the Explorer 300 inside the KINGHARDCASE case?
The listing gives no vents or cable openings, so take the station out to run or charge it.
What size is the KINGHARDCASE hard case?
The bullets say 15.55 x 12.99 x 8.11 in; the spec field says 12 x 7 x 14.5 in. The bullet size is the more detailed figure.
Featured in
See also
- revxon generator cover wen 56450ix review
- renogy 28 inch solar panel tilt mount brackets review
- twelseavan 250w portable solar panel review
- best generators under 100
- best generators under 150
- Best Generators Under $200 in 2026: 9 Picks Ranked by Specs
- Best Generators Under $300: 9 Spec-Based Picks
- 8 Best Generators Under $500, Compared
- jackery explorer plus 2042wh review
- lacdo hard drive carrying case review
