Lusperi 30 ft 14AWG 8mm Extension Cable Review
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The Lusperi AS-1045-RT is a 30 ft extension cable with an 8mm (7909) plug on one end and an 8mm socket on the other. It is sold as a replacement for Goal Zero's own 30 ft 8mm extension, so the job is simple: leave a Yeti or another 8mm-input station in the shade or indoors and run the panel lead out to the sun. The title gives the wire as 14AWG; the bullets never repeat that figure and give no current or voltage rating, and the only station they name is the Yeti 1250. Our notes come from Lusperi's listing and spec fields; we did not run the cable ourselves.
What stands out
- 30 ft run, 8mm (7909) male to female
- 14AWG in the title
- Sold as a Goal Zero 30 ft extension replacement
- Model AS-1045-RT
Who it fits
Good fit for
Owners of Goal Zero Yeti units or other stations with an 8mm solar input who want 30 ft between panel and station.
Who should skip it
Anyone whose panel ends in MC4 or Anderson plugs, or who wants a printed current rating before running a large panel array through one lead.
Verdict: A plain 30 ft 8mm lead at a low price; buy it for the length and the plug, and check your panel current against a 14AWG run yourself.
Lusperi AS-1045-RT in plain terms
30 ft length
Lets the station stay in shade or indoors while the panel sits in full sun.
8mm (7909) male to 8mm female
Extends an existing 8mm panel lead; it does not convert MC4 or Anderson.
14AWG (title only)
A fairly thick wire for an 8mm lead; the bullets do not confirm it or give an amp rating.
Named fit: Goal Zero Yeti 1250
Other 8mm-input stations should work if the plug size matches, but the listing does not list them.
Packed size 6.7 x 5.5 x 1.78 in
The coiled cable fits in a station's accessory bag.
How the AS-1045-RT is built
One end carries an 8mm male plug, the other an 8mm female socket, so it sits between a panel's own 8mm lead and the station input. The bullets call both ends "High Power Port 8mm(7909)", which mixes two Goal Zero terms: the High Power Port is a separate, larger connector on the Yeti 1250. Read it as an 8mm-to-8mm lead. No weight, jacket rating or weather rating is listed.
Putting 30 ft between panel and Yeti
Plug the panel's 8mm lead into the Lusperi socket, run the cable to where the station sits, and plug the 8mm male end into the station's solar input. Keep the coil fully unrolled in the sun so it does not heat up, and keep the plugs off wet ground since no water rating is given. Choose the AS-1045-RT if your gear already speaks 8mm; choose an MC4 extension instead if your panel uses MC4 leads and your station takes an MC4 adapter.
Checks before ordering the Lusperi AS-1045-RT
Three things to confirm first.
Check before you buy
- Your station's solar input is 8mm (7909), not Anderson or XT60
- Your panel's lead ends in an 8mm plug the AS-1045-RT socket accepts
- You are fine with a 30-day refund and no stated amp rating on the AS-1045-RT
The product at a glance
Lusperi 30ft 14AWG 8mm DC Extension Cable
Best for: Goal Zero 8mm panel runs
- Connector Type
- DC 8mm, DC 7909
- Compatible Devices
- Goal Zero Yeti 1250
- Cable Length
- 30FT
- Wire Gauge
- 14AWG
- Dimensions
- 6.7 × 5.5 × 1.78 inches
View on Amazon: Lusperi 30ft 14AWG 8mm DC Extension Cable Affiliate link
30 ft 8mm (7909) male-to-female extension sold as a Goal Zero 30 ft cable replacement; 14AWG per title; Yeti 1250 named.
Pros
- 30 ft between panel and station
- Standard 8mm plug on both ends
Cons
- No amp or voltage rating listed
- No weather rating
Good fit if
- Your Yeti or station takes an 8mm solar input
- You want the station out of the sun
Skip if
- Your panel uses MC4 or Anderson leads
- You need a stated current rating
Verdict: A simple 8mm extension for Goal Zero-style setups.
Specifications side by side
| Spec | Lusperi 30ft 14AWG 8mm DC Extension Cable |
|---|---|
| Connector Type | DC 8mm, DC 7909 |
| Compatible Devices | Goal Zero Yeti 1250 |
| Cable Length | 30FT |
| Wire Gauge | 14AWG |
| Dimensions | 6.7 × 5.5 × 1.78 inches |
| Size | 30FT |
| Color | Black |
| Model | AS-1045-RT |
Frequently asked questions
Does the Lusperi AS-1045-RT fit stations other than the Yeti 1250?
The listing names only the Yeti 1250. Any station with an 8mm (7909) solar input should take the plug, but confirm the size first.
What gauge is the Lusperi 30 ft cable?
The title says 14AWG; the bullets do not repeat it.
Can the AS-1045-RT connect MC4 panels?
Not on its own. It is 8mm on both ends, so an MC4 panel needs an MC4-to-8mm adapter first.
Is the Lusperi 8mm extension waterproof?
The listing gives no water or IP rating, so keep the joints off wet ground.
See also
- comeap solar 001 10awg mc4 to xt60 cable review
- mjpower 90w 19v universal power station charger review
- ecoflow smart home panel 2 review
- best generators under 100
- best generators under 150
- Best Generators Under $200 in 2026: 9 Picks Ranked by Specs
- Best Generators Under $300: 9 Spec-Based Picks
- 8 Best Generators Under $500, Compared
- rgeek 1106 DC to DC review
- shimano slx DC review
