Pecron PV500W 500W Foldable Solar Panel Review: Specs, Pros and Cons
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The Pecron PV500W is a 500W four-fold portable panel meant for large power stations, the kind that can take a single high-voltage input. Pecron publishes the numbers that matter for that match: Vmp 42.5V and open-circuit voltage 49.3V, with 25.1% monocrystalline cells. That is the reason to consider it over smaller folders: one panel, one cable, close to 500W in strong sun, at 22.5 lb. It ships with an MC4 extension cable and an MC4-to-XT60 adapter. The catch is voltage: at 49.3V Voc it is far above the 12-28V window of small stations such as Pecron's own E300LFP, so check your station's solar input first. No warranty term is given. This review draws on Pecron's listing and published specs; we did not test the panel.
What stands out
- 500W, 25.1% monocrystalline cells
- Vmp 42.5V, Voc 49.3V listed
- Four-fold, 22.5 lb with carry handle
- Kickstands tilt up to 90 degrees
- IP67, rated -10 to 70°C; MC4 and MC4-to-XT60 cables
Who it fits
Good fit for
Owners of 1,500Wh-plus stations with a 60V-class solar input who want close to 500W from one portable panel for RV trips or outage backup.
Who should skip it
Owners of small stations with 12-28V inputs, and hikers or anyone who cannot handle a 22.5 lb, 35-inch folded panel.
Verdict: A well-specified 500W folder for big stations; the 49.3V Voc rules out small ones.
PV500W specs in plain terms
500W, 25.1% cells
In strong summer sun a big station can see several hundred watts from this one panel.
Vmp 42.5V / Voc 49.3V
Your station's solar input must accept at least about 50V; two in series would need about 100V.
MC4 plus MC4-to-XT60 cable
Plugs straight into XT60 stations; Anderson or 8 mm inputs need an extra adapter.
22.5 lb, about 34.8 x 32.9 x 3.5 in
Car-camping and RV size, not a backpacking panel.
IP67, -10 to 70°C
Rain and dust are fine; Pecron describes it as splash and light-rain resistant, not for immersion.
Four-fold build with handle and stands
The PV500W folds in four with a thick built-in carry handle, and its integrated kickstands let you stand it nearly vertical for low winter sun or tilt it back at noon. Pecron calls the surface corrosion resistant and rates it IP67. The box holds the panel, an MC4 extension cable, an MC4-to-XT60 cable and a manual; Pecron lists round-the-clock customer support but no warranty length.
Charging a large station with the Pecron 500W
Set the PV500W on flat ground, adjust the stands so the cells face the sun squarely, and run the MC4 extension to the station; use the XT60 lead if the station has an XT60 port. Re-aim every couple of hours for the most energy. Choose the PV500W if your station accepts 50V and 500W on one input; choose a 200W panel in the 18-24V class if your station's input is small or you need something lighter.
Before buying the Pecron PV500W
Voltage first, then weight.
Check before you buy
- Your station's solar input accepts the PV500W's 49.3V Voc
- Your station takes 500W on one input, or you accept the cap
- Your station has XT60 or MC4, or you add an adapter for the PV500W
- You can lift and store a 22.5 lb Pecron panel
The product at a glance
Pecron 500W Foldable Solar Panel
Best for: Large power stations
- Rated Power
- 500W
- Conversion Efficiency
- 25.1%
- Panel Type
- Foldable
- Cell Type
- Monocrystalline
- System Voltage
- Vmp 42.5V, Vov 49.3V
- IP Rating
- IP67
View on Amazon: Pecron 500W Foldable Solar Panel Affiliate link
A 500W four-fold panel with 25.1% mono cells, Vmp 42.5V and Voc 49.3V, IP67, rated -10 to 70°C. It weighs 22.5 lb with a carry handle and kickstands that tilt to 90 degrees, and ships with MC4 extension and MC4-to-XT60 cables. No warranty length listed.
Pros
- Voltage figures published
- 500W from one panel
- XT60 cable included
Cons
- 22.5 lb
- Too high-voltage for small stations
- Warranty length not stated
Good fit if
- Your station accepts 50V solar input
- You want few cables at camp
Skip if
- Your station tops out at 28V input
- You carry the PV500W far from the car
Verdict: A strong single-panel option for large stations.
Specifications side by side
| Spec | Pecron 500W Foldable Solar Panel |
|---|---|
| Rated Power | 500W |
| Conversion Efficiency | 25.1% |
| Panel Type | Foldable |
| Cell Type | Monocrystalline |
| System Voltage | Vmp 42.5V, Vov 49.3V |
| IP Rating | IP67 |
| Weight | 22.5 lbs |
| Wattage | 500W |
| Application | Camping, Emergency, RV, Off-Grid |
| Water Resistance | Waterproof |
| Dimensions | 34.8 × 32.9 × 3.52 inches |
| Size | 500W |
| Color | Black |
| Model | PV500W |
Frequently asked questions
What are the Pecron PV500W's voltage figures?
Vmp 42.5V and open-circuit voltage 49.3V, per Pecron's listing.
Does the Pecron PV500W work with the Pecron E300LFP?
No. The E300LFP's solar input is 12-28V Voc and 100W max, well below this panel's 49.3V.
How heavy is the Pecron PV500W?
22.5 lb, with a built-in carry handle.
What cables come with the Pecron PV500W?
An MC4 extension cable and an MC4-to-XT60 adapter cable.
Is the Pecron PV500W waterproof?
It is rated IP67 against dust and water, for rain and splashes rather than submersion.
Featured in
See also
- mhpowos 220w 40v foldable solar panel review
- mhpowos 100 watt bifacial portable review
- solupup 30w foldable solar charger review
- pecron e300lfp solar generator 100w panel review
- pecron 300w foldable solar panel review
- PECRON 200W Foldable Solar Panel (LL-YT200W) Review: Specs, Pros and Cons
- twelseavan 500w portable solar panel review
- sanpyl portable solar charging electronic review
