SOLPERK 100W 24V Solar Panel Kit Review: Who It Fits and Who Should Skip It
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
Most small solar kits are 12V; SOLPERK's 100W kit is built for 24V batteries, the kind found in semi trucks, tractors, trolling-motor banks and some cabin systems. It pairs an IP67 glass-and-aluminum panel with an adjustable 10A PWM controller rated IP65, plus tilting mounts that fit roofs, utility poles and walls, and corner guards on the frame. SOLPERK lists LiFePO4, AGM and gel 24V batteries. The listing's "up to 30%" cell efficiency is not credible for mono cells, and its 20.9 x 13.4 inch size looks small for 100W. Our review rests on SOLPERK's listing and specs, not testing.
What stands out
- Wired for 24V batteries
- IP67 panel, IP65 controller
- Adjustable 10A PWM controller with full protection
- Mounts for roof, pole or wall
- 1-year after-sales service
Who it fits
Good fit for
Owners of 24V systems (trucks, tractors, 24V trolling banks, small cabin banks) who need more than a 50W maintainer and want one boxed kit.
Who should skip it
12V owners, anyone wanting MPPT efficiency, and buyers who want to size a system from trustworthy efficiency and dimension data.
Verdict: One of few 100W kits made for 24V; double-check the size before mounting.
The 24V kit's specs explained
100W, 24V system
Charges 24V batteries directly through the controller; it does not match 12V banks.
10A PWM controller, IP65
Adjustable, with overcharge, over-discharge, over-voltage and short-circuit protection; PWM, so no MPPT boost.
IP67 panel, tempered glass
Sealed for outdoor mounting year round.
20.9 x 13.4 x 0.7 in listed
Small for a 100W glass panel; ask SOLPERK whether this is the real panel size.
Up to 30% efficiency claim
Above what mono cells deliver; plan on the 100W rating.
Panel, controller and mounts
The panel has a toughened glass face in a corrosion-resistant aluminum frame with pre-drilled holes and protective corners. The mounts adjust for angle and fit rooftops, poles and walls, which suits a barn wall or a truck headache rack. SOLPERK quotes a 25-year lifespan, and backs the kit with 24/7 online support and 1-year after-sales service. No weight, Voc or Isc is listed.
On a 24V truck, tractor or boat
Mount the panel on the cab rack or a shed wall facing the sun, run its lead to the 10A controller and the controller to the 24V battery. For a parked truck or tractor, 100W more than covers standby drain; for a 24V trolling bank, it puts back part of a day's use between outings. Keep the controller somewhere shaded and dry even with its IP65 rating.
Before buying SOLPERK's 24V kit
Confirm voltage and size.
Check before you buy
- Your battery bank is 24V, as the SOLPERK 100W 24V kit requires
- You have asked SOLPERK to confirm the 100W 24V panel's real dimensions
- PWM charging from the SOLPERK 10A controller suits your battery
- You have a roof, pole or wall spot for the SOLPERK 100W 24V mounts
The product at a glance
SOLPERK 100W 24V Solar Panel Kit
Best for: 24V vehicles and banks
- Rated Power
- 100W
- Conversion Efficiency
- 30%
- Cell Type
- Monocrystalline
- System Voltage
- 24V
- IP Rating
- IP67
- Application
- Camping, Home, Outdoor, RV, Car, Marine
View on Amazon: SOLPERK 100W 24V Solar Panel Kit Affiliate link
A 100W 24V glass panel (IP67) with an adjustable 10A PWM controller (IP65), mounts for roofs, poles and walls, and corner guards. Listed size 20.9 x 13.4 in looks small for 100W, and the 30% efficiency claim is doubtful.
Pros
- Made for 24V
- IP67 panel
- Versatile mounts
Cons
- PWM controller
- Size and efficiency data questionable
Good fit if
- You run a 24V truck, tractor or trolling bank
- You want more than a 50W 24V maintainer
Skip if
- Your system is 12V
- You want MPPT charging
Verdict: A rare 100W 24V kit; confirm its size first.
Specifications side by side
| Spec | SOLPERK 100W 24V Solar Panel Kit |
|---|---|
| Rated Power | 100W |
| Conversion Efficiency | 30% |
| Cell Type | Monocrystalline |
| System Voltage | 24V |
| IP Rating | IP67 |
| Wattage | 100W |
| Application | Camping, Home, Outdoor, RV, Car, Marine |
| Features | Solar Charging |
| Voltage | 24V |
| Water Resistance | Waterproof |
| Dimensions | 20.9 × 13.4 × 0.7 inches |
| Size | 100W 24V (with Controller) |
| Color | Black |
| Model | 100W 24V |
Frequently asked questions
Can the SOLPERK 100W 24V kit charge a 12V battery?
No. SOLPERK built this kit for 24V systems; its 12V kits are separate products.
What controller comes with the SOLPERK 100W 24V kit?
An adjustable 10A PWM controller rated IP65, with overcharge, over-discharge, over-voltage and short-circuit protection.
Is the SOLPERK 100W 24V panel waterproof?
SOLPERK rates the 100W 24V panel IP67.
Which 24V batteries work with the SOLPERK 100W kit?
SOLPERK names LiFePO4, AGM and gel 24V batteries.
See also
- marbero ed 30 30w foldable solar panel review
- flexsolar e36mini 36w solar charger review
- flexsolar 15w foldable solar trickle charger review
- solperk 30w 12v solar maintainer pwm kit review
- solperk 50w 24v solar panel kit review
- SOLPERK 20W 12V Solar Maintainer Kit 2-Pack Review
- SOLPERK 30W 12V Solar Battery Charger with MPPT Controller Review: Who It Fits and Who Should Skip It
- SOLPERK 50W 12V Solar Panel Kit Review: Specs, Pros and Cons
- best 100W solar panels
- tapo c460 kit 4k solar review
