ALLPOWERS SF100 100W Flexible Solar Panel Review: Specs, Pros and Cons
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The ALLPOWERS SF100 is a 100W flexible panel only 3 mm thick and about 5.3 lb, made to bend into a U shape over a van roof, boat deck or curved RV cap. The point that sets it apart is voltage: ALLPOWERS gives a 25.5V maximum power voltage, chosen to suit portable power stations such as its own R600, R1500 Lite, S2000 Pro and R2500, and it ships with an MC4-to-XT60 cable for them. It is rated IP68, works from -20 to 85°C, and has six 8 mm grommets plus bypass diodes. That 25.5V also means a plain PWM controller on a 12V battery would waste much of its output. This review is based on ALLPOWERS' published specs and listing.
What stands out
- 100W, 22-25% cells under ETFE
- 3 mm thick, bends into a U shape
- 25.5V Vmp for station inputs
- IP68, -20 to 85°C
- MC4-to-XT60 cable included, 2-year warranty
Who it fits
Good fit for
Van, boat and RV owners with a curved roof who charge a portable power station (ALLPOWERS or another brand with an XT60 or MC4 input) and want a stick-on panel.
Who should skip it
12V battery systems on a PWM controller, and anyone who needs to walk on the panel: it handles 50 kg spread flat, not a person's footstep on one spot.
Verdict: A thin, IP68 flexible 100W built for station charging; pair it with MPPT if it feeds a 12V battery.
ALLPOWERS SF100 specs in context
100W, 22-25% mono, ETFE
ETFE resists UV and scratches better than PET on a permanent install.
25.5V Vmp
Sits well inside most station solar windows; on a 12V battery use an MPPT controller.
3 mm, 5.29 lb, 39.7 x 23.6 in
Light enough for adhesive mounting on fiberglass or aluminum roofs.
IP68, -20 to 85°C
Rated for immersion, which suits boat decks.
50 kg flat load
ALLPOWERS' figure for weight spread flat; avoid point loads.
Six 8 mm grommets
Screw, strap or glue it; no drilling needed if you use adhesive.
Build of the SF100
ALLPOWERS laminates mono cells under an ETFE coating on a thin backing that bends into a U shape, with bypass diodes to limit losses when part of the panel is shaded. Six 8 mm grommets take screws or ties, and ALLPOWERS also says strong adhesive works for a drill-free install. The box holds the panel, an MC4-to-XT60 cable and a manual; ALLPOWERS backs it for 2 years.
Fitting the SF100 to a van or boat
On a van, the SF100 can be glued along a curved roof and run to a station inside through the supplied XT60 lead, so the station stays topped up while parked. On a boat, the IP68 rating suits a deck or bimini top. Bending reduces output on the curved part because the cells face different angles, and flexible panels run hot when glued flat to metal, so leave an air gap where you can.
Before buying the ALLPOWERS SF100
Check the voltage and mounting first.
Check before you buy
- Your station's solar input accepts the SF100's 25.5V Vmp
- You use MPPT, not PWM, if the SF100 feeds a 12V battery
- You have adhesive or screws for the SF100's 8 mm grommets
- Your station takes XT60, or you have an adapter for the SF100's MC4 leads
The product at a glance
ALLPOWERS SF100 100W Flexible Solar Panel
Best for: Curved roofs and stations
- Rated Power
- 100 W
- Conversion Efficiency
- 25%
- Panel Type
- Flexible
- Cell Type
- Monocrystalline
- System Voltage
- 25.5V
- IP Rating
- IP68
View on Amazon: ALLPOWERS SF100 100W Flexible Solar Panel Affiliate link
A 3 mm, 5.3 lb flexible 100W panel with ETFE, IP68 and a 25.5V Vmp aimed at power stations, plus an MC4-to-XT60 cable. Needs MPPT on 12V batteries.
Pros
- Very thin and bendable
- IP68 rating
- XT60 cable for stations
Cons
- 25.5V Vmp poor on PWM 12V setups
- No point-load rating
Good fit if
- You charge a station from a curved van or boat roof
- You want an SF100 glued down without drilling
Skip if
- Your 12V battery uses a PWM controller for the SF100
- You need a panel you can walk on
Verdict: A well-specified flexible 100W for charging stations from a curved roof.
Specifications side by side
| Spec | ALLPOWERS SF100 100W Flexible Solar Panel |
|---|---|
| Rated Power | 100 W |
| Conversion Efficiency | 25% |
| Panel Type | Flexible |
| Cell Type | Monocrystalline |
| System Voltage | 25.5V |
| IP Rating | IP68 |
| Weight | 5.29 pounds |
| Wattage | 100W |
| Application | Camping, RV, Marine |
| Water Resistance | Waterproof |
| Dimensions | 39.7 × 23.6 × 0.11 inches |
| Color | 100W solar panel |
| Model | SF100 |
Frequently asked questions
What voltage is the ALLPOWERS SF100?
ALLPOWERS lists a 25.5V maximum power voltage, which suits power station solar inputs.
Can the ALLPOWERS SF100 charge a 12V battery?
Yes through an MPPT controller; a PWM controller would clamp it near battery voltage and waste output.
Is the ALLPOWERS SF100 waterproof?
ALLPOWERS rates it IP68 and gives a -20 to 85°C operating range.
What comes with the ALLPOWERS SF100?
The panel, an MC4-to-XT60 cable and a user manual, with a 2-year warranty.
How thin is the ALLPOWERS SF100?
3 mm, at about 5.3 lb, and it bends into a U shape.
See also
- bluetti pv100fx 100w flexible solar panel 2 pack review
- everexceed 5w security camera solar panel review
- eci power 100w 12v solar kit 20ah lifepo4 review
- allpowers se200 200w portable solar review
- allpowers 200 watt portable solar review
- ALLPOWERS SE200 200W Foldable Solar Panel Review: Specs, Pros and Cons
- ALLPOWERS SP002 21W Solar Charger with 10,000mAh Battery Review: Who It Fits and Who Should Skip It
- daranener 576wh solar generator 100w review
- garmin instinct solar review
