As an Amazon Associate we earn from qualifying purchases. Affiliate disclosure

BougeRV ISE239N 300W Bifacial N-Type Solar Panel Review

Latest update:

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

The BougeRV ISE239N is a single 300W rigid panel with N-type 16BB cells rated at 25% and a clear back that lets it collect reflected light from below. It measures 61.3 x 37.4 x 1.4 in and weighs 32.8 lb, with an aluminum frame, pre-drilled holes, an IP68 junction box with diodes and a pair of 3 ft leads. BougeRV pitches it for 12V and 24V battery systems, with 48V reached by wiring panels in series, and for on-grid or off-grid inverters. For an RV roof or shed with room for a 5-foot panel, one ISE239N replaces three 100W panels with fewer connections. Two cautions: the 30% bifacial gain is a best-case marketing figure, and the listing gives no Voc, Vmp or connector type. Everything here comes from BougeRV's listing and specs; we did not mount one.

What stands out

  • 300W, N-type 16BB cells at 25%
  • Bifacial: clear back gathers reflected light
  • 61.3 x 37.4 x 1.4 in, 32.8 lb
  • IP68 junction box, diodes, 3 ft leads
  • 10 years of BougeRV tech support

Who it fits

Good fit for

RV, cabin and boat owners building a 12V or 24V battery bank with a charge controller, who have roof or ground space for a 5-foot panel and want fewer panels to wire.

Who should skip it

Portable station owners who want something to carry to a campsite, and anyone who needs Voc and Vmp before sizing a controller or station input.

Verdict: A big, well-built bifacial panel for fixed installs; ask BougeRV for the electrical figures before you size the rest of the system.

BougeRV ISE239N in plain terms

300W, 25% N-type 16BB

More busbars mean thinner ribbons and less shaded cell area, per BougeRV.

Bifacial back

Extra output depends on what is under the panel; BougeRV's 30% is a best case.

12V/24V systems

Needs a charge controller; four or more in series for 48V, per BougeRV's wording.

61.3 x 37.4 x 1.4 in

Takes the space of about 89% of three 100W panels, by BougeRV's 11% saving claim.

32.8 lb

Manageable for two people on a roof; too heavy to carry around camp.

IP68 junction box, 3 ft leads

Sealed box with bypass diodes; connector type is not named.

ISE239N build

The ISE239N uses a corrosion-resistant aluminum frame around glass on both faces, so the back is transparent rather than an opaque sheet. BougeRV says the Class A cells pass an EL (electroluminescence) test for microcracks. The junction box is rated IP68 and comes with diodes and two 3 ft cables already attached; pre-drilled holes on the frame take standard mounting brackets, which are not included.

Living with the BougeRV ISE239N

The bifacial gain needs light reaching the back: a tilted ground mount over gravel, sand, snow or a light roof helps, while a panel laid flat on a dark RV roof gets little from its back side. Run the leads to a charge controller sized for 300W at your battery voltage, or to a station whose solar input covers the panel's voltage once BougeRV confirms it. One large panel means one set of connections and fewer brackets than three 100W panels.

Before buying the BougeRV ISE239N

Line these up before ordering a 5-foot panel.

Check before you buy

  • Your roof or rack has room for the ISE239N's 61.3 x 37.4 in
  • BougeRV has confirmed the ISE239N Voc and Vmp for your controller
  • You have mounting brackets and MC4-type cables for the ISE239N
  • Something light-colored sits under the ISE239N if you want bifacial gain

The product at a glance

BougeRV 300W Bifacial N-Type Solar Panel

Best for: RV and cabin roofs

Rated Power
300 W
Conversion Efficiency
25%
Panel Type
Bifacial
Cell Type
N-Type monocrystalline
System Voltage
12V, 24V
Busbar Count
16BB

View on Amazon: BougeRV 300W Bifacial N-Type Solar Panel Affiliate link

BougeRV's ISE239N is a 300W bifacial N-type rigid panel (25%, 61.3 x 37.4 in, 32.8 lb) with an IP68 box and 3 ft leads. Strong for RV and cabin roofs; electrical specs missing.

Pros

  • One panel instead of three 100W
  • Bifacial back for reflected light
  • IP68 junction box and diodes

Cons

  • No Voc, Vmp or connector type listed
  • 30% gain is best case
  • Heavy and large for portable use

Good fit if

  • You are wiring a 12V or 24V RV or cabin system
  • You can tilt the ISE239N over a light surface

Skip if

  • You want to carry the ISE239N to a campsite
  • You need the voltage figures in the listing

Verdict: A strong single-panel choice for fixed installs once the voltages are confirmed.

Specifications side by side

Spec BougeRV 300W Bifacial N-Type Solar Panel
Rated Power 300 W
Conversion Efficiency 25%
Panel Type Bifacial
Cell Type N-Type monocrystalline
System Voltage 12V, 24V
Busbar Count 16BB
IP Rating IP68
Weight 32.8 lbs
Wattage 300W
Application Camping, Home, RV, Off-Grid, Marine
Voltage 12V, 24V
Dimensions 61.3 × 37.4 × 1.4 inches
Size 300W 61.3"L x 37.4"W x 1.4"H
Color Black
Model ISE239N

Frequently asked questions

Is the BougeRV ISE239N a 12V or 24V panel?

BougeRV says it works with 12V and 24V batteries through a controller and gives no Voc or Vmp; ask BougeRV for them.

How heavy is the BougeRV ISE239N 300W panel?

32.8 lb, at 61.3 x 37.4 x 1.4 in.

Will the BougeRV ISE239N really make 30% more power?

That is BougeRV's best-case figure for the bifacial back; on a flat dark roof the gain will be far smaller.

What comes attached to the BougeRV ISE239N?

An IP68 junction box with diodes and a pair of 3 ft cables.

Can the BougeRV ISE239N charge a portable station?

Only if the station's solar input covers the panel's voltage; it is a fixed-mount panel, not a portable one.

See also