As an Amazon Associate we earn from qualifying purchases. Affiliate disclosure

EtnalSolar GF100W-B01 100W Bifacial Solar Panel 2-Pack Review

Latest update:

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

This EtnalSolar listing (model GF100W-B01) is a pair of 100W bifacial glass panels, 200W in total, built with N-type 18BB cells rated up to 25.6%. Each panel measures about 39.8 x 18.1 x 1.2 in and weighs about 10.5-10.6 lb, which reads as per panel since it matches the single-panel size class; the listing does not say so outright. The rear side is clear, and EtnalSolar claims up to 30% extra power over snow, white roofs or pale ground, a best-case figure that a dark roof will not approach. Each has 3.2 mm tempered glass, an aluminium frame, 11AWG copper leads with MC4 plugs, pre-drilled holes and an IP68 rating. EtnalSolar offers a 10-year after-sales support program and states 87.4% power retention after 30 years. No Voc, Vmp or Isc are given. We wrote this from EtnalSolar's listing alone.

What stands out

  • Two 100W bifacial panels (200W total)
  • N-type 18BB cells up to 25.6%
  • About 39.8 x 18.1 in, ~10.6 lb each
  • 3.2 mm glass, IP68, MC4 leads
  • 87.4% output stated after 30 years

Who it fits

Good fit for

RV, trailer, boat and shed owners who want two small framed panels they can place in separate spots or wire in series for a 24V bank.

Who should skip it

Anyone who wants one larger panel with fewer mounts, or who needs voltage figures now to plan a station input.

Verdict: A sensible pair of compact bifacial 100W panels; the 30% rear-gain claim is the optimistic end.

EtnalSolar GF100W-B01 2-pack in plain terms

2 x 100W bifacial

Wire in parallel for a 12V bank or in series for 24V.

Up to 30% rear gain (claim)

Applies over snow or white surfaces; expect much less on a dark roof.

39.8 x 18.1 x 1.2 in, ~10.6 lb

Small enough for trailer tongues, boat rails or a shed roof.

3.2 mm tempered glass, aluminium frame

Rigid, framed build for permanent mounts.

11AWG leads, MC4, up to 25A

Heavy wire for the current; MC4 needs an adapter for most stations.

IP68, 10-year support

Sealed for weather; support program rather than a stated warranty.

Two framed bifacial panels

Both panels are framed glass on both faces with a transparent back, so light reflected from below reaches the rear cells. The listing pairs IP68 sealing with a low temperature coefficient, though it gives no coefficient number. The same GF100W-B01 code and 39.8 x 18.1 in size also appear on AeternaSol's 100W bifacial listings, which suggests one factory supplies both brands; compare the warranty and price of each before buying.

Placing a bifacial pair

On a flat RV roof, the rear side sees little light, so treat these as two 100W panels. On a ground rack or a tilted mount over gravel, concrete or snow, raise the panels so light can reach the back. Choose the EtnalSolar 2-pack if two separate 39.8 in panels fit your roof better than one long module or you want to split them between tongue and roof; choose a single 200W panel if you want fewer brackets and connections.

Before buying the EtnalSolar pair

Check layout and wiring.

Check before you buy

  • Two 39.8 x 18.1 in EtnalSolar panels fit your mounting area
  • You plan series or parallel wiring for your bank
  • You can get the GF100W-B01 Voc from EtnalSolar
  • You have MC4 adapters or branch connectors
  • You accept a support program in place of a warranty term

The product at a glance

EtnalSolar 100W Bifacial Solar Panel

Best for: Trailers and sheds needing two panels

Rated Power
200W
Conversion Efficiency
Up to 25.6%
Panel Type
Bifacial
Cell Type
N-Type
System Voltage
12V/24V
Busbar Count
18BB

View on Amazon: EtnalSolar 100W Bifacial Solar Panel Affiliate link

Two 100W bifacial framed panels with N-type 18BB cells up to 25.6%, each about 39.8 x 18.1 in and 10.6 lb, 3.2 mm glass, IP68, 11AWG MC4 leads and pre-drilled holes. EtnalSolar states 87.4% retention after 30 years and 10-year support; no Voc.

Pros

  • Two panels for flexible layout
  • Bifacial clear back
  • Heavy 11AWG leads

Cons

  • No Voc or Vmp listed
  • 30% rear gain is best case
  • Weight not stated as per panel

Good fit if

  • You want 24V via two panels in series
  • Your mount sits over pale ground

Skip if

  • You prefer one bigger panel
  • You need the EtnalSolar voltage figures

Verdict: Compact bifacial pair for small roofs and racks.

Specifications side by side

Spec EtnalSolar 100W Bifacial Solar Panel
Rated Power 200W
Conversion Efficiency Up to 25.6%
Panel Type Bifacial
Cell Type N-Type
System Voltage 12V/24V
Busbar Count 18BB
IP Rating IP68
Weight 10.5 lbs
Wattage 100W
Application RV, Off-Grid, Marine
Features Solar Charging
Voltage 12V, 24V
Dimensions 39.8 × 18.1 × 1.18 inches
Size 100W 2-Pack Bifacial
Color Bifacial
Model GF100W-B01

Frequently asked questions

How many panels come in the EtnalSolar GF100W-B01 listing?

Two 100W bifacial panels, 200W in total.

How much extra power does the EtnalSolar bifacial back add?

EtnalSolar claims up to 30% over reflective surfaces such as snow or white roofs; flat dark roofs give far less.

How big is each EtnalSolar 100W bifacial panel?

About 39.8 x 18.1 x 1.2 in, about 10.6 lb.

Can the EtnalSolar pair charge a 24V battery?

Yes, wiring the two in series suits a 24V bank through a controller.

Does the EtnalSolar 2-pack list a Voc?

No; Voc, Vmp and Isc are not in the listing.

See also