EtnalSolar GB200W-B02 200W N-Type Solar Panel Review
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The EtnalSolar GB200W-B02 is a single-sided 200W framed glass panel for 12V battery systems, using 18BB N-type cells rated at up to 25.6%. The spec field gives 52.8 x 26.4 x 1.18 in and 19.6 lb, a common footprint for 200W roof panels. EtnalSolar backs it with a 10-year materials and workmanship warranty, a 30-year output figure of 87.4% retention, first-year degradation of 1.0% or less and 0.4% a year after that. Built-in bypass diodes limit losses from partial shade, the operating range is -45 to 85°C, and the frame is rated for 2400Pa of wind and 5400Pa of snow. It has MC4 leads and pre-drilled holes; the listing gives no Voc, Vmp, Isc or cable length. EtnalSolar's 2-pack of the same model is sold separately. These notes are based on EtnalSolar's listing, with no panel on hand.
What stands out
- 200W, 18BB N-type up to 25.6%
- 52.8 x 26.4 in, 19.6 lb
- Bypass diodes, -45 to 85°C
- 10-year warranty, 87.4% at 30 years
- IP68, MC4 leads
Who it fits
Good fit for
Owners building a 12V roof or ground array on an RV, cabin, farm building or shed who want a clearly stated warranty on a standard-size 200W panel.
Who should skip it
Anyone carrying a panel to camp, or needing voltage figures to match a portable station before ordering.
Verdict: A conventional 200W roof panel with better-than-usual warranty terms; get the Voc before wiring to a station.
EtnalSolar GB200W-B02 specs in plain terms
200W, 18BB N-type, 25.6%
Standard output for a full-size roof panel.
52.8 x 26.4 x 1.18 in, 19.6 lb
Common 200W size; two people make roof mounting easier.
≤1.0% first-year, 0.4%/yr loss
EtnalSolar's degradation figures behind its 30-year output claim.
Bypass diodes
A shaded section does not drag the whole panel down as far.
2400Pa wind / 5400Pa snow, IP68
Framed for exposed roofs and heavy snow.
10-year materials and workmanship warranty
A stated term, not just a support promise.
Single-face framed module
The GB200W-B02 uses 3.2 mm low-iron tempered glass, an anodized aluminium frame and reinforced corners. Unlike EtnalSolar's bifacial 100W panels it has an opaque back, so mounting height does not matter for output. MC4 connectors and pre-drilled holes suit Z-brackets or rail kits. EtnalSolar says it works with PWM or MPPT controllers and that several can be wired in series or parallel for 24V or 48V banks.
Running the GB200W-B02 on a 12V bank
One panel through a PWM or MPPT controller suits a 12V battery; two in series raise voltage for an MPPT controller or a higher-voltage station input. Choose the EtnalSolar GB200W-B02 if you want a framed roof panel with a 10-year warranty and published degradation rates; choose a folding 200W panel if it needs to travel to camp, since 19.6 lb of glass is not meant for carrying around.
Before buying the EtnalSolar 200W
Confirm fit and electrics.
Check before you buy
- Your roof takes a 52.8 x 26.4 in EtnalSolar panel
- Your mount handles 19.6 lb per panel
- You can get the GB200W-B02 Voc and Isc from EtnalSolar
- Your controller is sized for one or two 200W panels
- You have MC4 extensions of the right length
The product at a glance
EtnalSolar 200W 18BB N-Type Panel
Best for: 12V roof arrays
- Rated Power
- 200 W
- Conversion Efficiency
- 25.6%
- Cell Type
- N-Type monocrystalline
- System Voltage
- 12 V
- Busbar Count
- 18BB
- IP Rating
- IP68
View on Amazon: EtnalSolar 200W 18BB N-Type Panel Affiliate link
A single-face 200W framed glass panel with 18BB N-type cells up to 25.6%, 52.8 x 26.4 in and 19.6 lb, bypass diodes, IP68, MC4 leads and a 10-year materials and workmanship warranty with 87.4% output stated at 30 years. No Voc listed.
Pros
- 10-year stated warranty
- Published degradation rates
- Bypass diodes for shade
Cons
- No Voc, Vmp or Isc
- Heavy for carrying
- Cable length not given
Good fit if
- You are building a roof array
- Warranty terms matter to you
Skip if
- The EtnalSolar panel must go camping
- You need its Voc today
Verdict: Standard 200W roof panel with solid stated terms.
Specifications side by side
| Spec | EtnalSolar 200W 18BB N-Type Panel |
|---|---|
| Rated Power | 200 W |
| Conversion Efficiency | 25.6% |
| Cell Type | N-Type monocrystalline |
| System Voltage | 12 V |
| Busbar Count | 18BB |
| IP Rating | IP68 |
| Weight | 19.6 lbs |
| Wattage | 200W |
| Application | Home, RV, Off-Grid, Marine |
| Features | Solar Charging |
| Voltage | 12V |
| Dimensions | 26.4 × 1.18 × 52.8 inches |
| Color | Black |
| Model | GB200W-B02 |
Frequently asked questions
What warranty does the EtnalSolar GB200W-B02 have?
10 years on materials and workmanship, plus a 30-year output figure of 87.4%.
Is the EtnalSolar GB200W-B02 bifacial?
No, this listing is a single-face panel; EtnalSolar's bifacial models are separate listings.
How heavy is the EtnalSolar 200W panel?
19.6 lb per the spec field, at 52.8 x 26.4 x 1.18 in.
Does the EtnalSolar GB200W-B02 have bypass diodes?
Yes, built-in bypass diodes reduce losses under partial shade.
What temperatures can the EtnalSolar GB200W-B02 handle?
EtnalSolar lists -45 to 85°C.
Featured in
See also
- hilaprisol 200w bifacial solar panel review
- miady 2 pack portable charger 22 5w review
- iniu p55 10000mah 45w power bank review
- etnalsolar 100w bifacial solar panel 2 pack review
- etnalsolar 400w n type solar panel 2 pack review
- livosun 430 watt solar panel review
- arctwonder solar panel rooftop tent review
